Overview of Status of Analysis, Design, Fabrication, Tests, etc.
Installations of hardwares are almost done except suitable lens and high-speed camera adaptor.
Improving the coding for tracking: solving the problem and frequency for low-speed camera is so low.
Designing the adaptor and adjusted parameters.
Accomplishments from Previous Week
3-D printed the first adaptor. Because of the thickness of 3-D printing materials, parameters are adjusted. And the second adaptor is printed.
Ordered spring loaded pin.
Found bottleneck of the software and attempted fixes.
Goals for Next Week (list names after each item). Use specific and measurable objectives.
Printed the final 3-D printing connector and soldering pins. (Mingcong and Zizhao)
Resolve bottleneck through software techniques and ready for LED simulation. (Keren)
Sponsor Comments from Last Meeting and Actions Taken to Address these Comments (indicate date of comments and if via email or in person)
The vibration of the frame may influence behavior of high-speed camera. Therefore, consideration of vibration is important. (02/25/2020, in person)
Starting from tracking using one camera to find the problem why tracking frequency is so low. (02/25/2020, in person)
Next meeting will be in the Lab to check about the demo of tacking and high-speed camera lens control. (03/02/2020, email)
Action: Keren worked on the improving the tracking performance and found bottleneck for the code.
Action: Zizhao and Mingcong worked on designing the adaptor that fits for pins for lens control.
Instructor Comments from Last Meeting and Actions Taken to Address these Comments (indicate date of comments and if via email or in person)
Report and website should be sent to sponsor for feedback. (02/28/2020, email)
Comments should be written by all team members and consolidated into one report. (02/28/2020, email)
Comments for other report should be meaningful for improving quality of report. (02/25/2020, in person)
Action: All team members review report and webpage from Team 1 carefully and write our own comments.
Comments from Other Students in the Class (indicate date of comments and if via email or in person)
Don't be nervous during the presentation and should face more to audiences.(02/28/2020, email)
Some data and explanations are too complicated. (02/28/2020, email)
Speak too fast and slides are too clustering. (02/28/2020, email)
Risks and Areas of Concern
None
Resources or Information Required but not Available
None
Schedule
Finish LED testing and make high speed camera lens adjustable by Arduino.
Update Gantt chart.
Budget (list amount spent and amount remaining)
Amount spent: $20, Spring loaded pins * 30
Progress on Report and Webpage
Finish second draft for report and webpage
Send second drafts to Team 1.