Embedded Files
This is a pawn I made using TinkerCad I had to use many shapes in unison to cream a fluent structure which is my pawn. I started with a cilender and shrunk it down to make a strong base. Then I made a cone to create a body and put a ring around the body to add dimension. Now I still needed to add a ball on top to make it a pawn! To do that I needed a base to put it on and so I made an upside down cone which makes a base and finishes the body then I have a place to put the ball to make the pawn complete.
For this design, we had to make a plant holder and this might look confusing at first it is very intuitive. This Plant holder is meant to go on your desk with the blue part having a hole in the bottom for drainage. The blue plant holder is attached to the red part which is what holds it on your desk, you start by putting your desk in the gap between the red part where the bottom part will come up and press against the table but the top part will push in the opposite direction keeping it on your desk no matter what size it is. The last part I added because it goes on your desk you need pens and pencils and that's what the green thing is it's a pencil and pen holder.
For this design, we had to make a snowman with each ball getting smaller as we go to the head and we were told to add defining features that added to us as a person. So I chose a kid's carnival hat to channel my inner kid and silliness. I then added arms and coal for a button down and eyes and a carrot nose to make it more realistic to an actual snowman. I added pants to make him funny looking to add to his uniqueness and make him stand out. I also gave him a heart to show that even with a funny appearance he still has a heart and feelings I put that there to subliminally say everyone has a heart no matter their appearance.
This is my superhero design I gave it many features that make it stand out, it has one hand on his hip and his other hand leading his flight into the distance for infinity and beyond! I also gave him a cape to make him more noticeable and gave him a face mask that is different from the rest to make him stand out.
For this design we had to make a basic rocket, but I did not like the basic rocket so I decided to spice things up a little bit and add fun dragon wings.
This was my favorite design by far it is my plane. Starting in the bottom left I have a windshield and a bunch of passengers and a pilot. I then made a plane body with two jet engines on it and underneath it, I made a bar for the landing gear to snap into. I also made the plane hollow so you can put all the passengers into it, the wing is also detachable so you can put it into the back of the plane. Speaking of detachable parts the windshield can go in and out of the plane and has a hole underneath it so the pilot can go there.
This is my final design for my choice design and I decided to make a utility stand that functions as a phone stand and a pen holder. The phone stand has a hole in the bottom of it so that a phone charger can be charging your phone while your phone is standing up it also has a place for an Apple watch charger to sit so you can have a place for it. The pen holder has three sections for different types of pens.
I chose this because I always have to prop my phone up against my microphone but whenever its charging it just sits on my desk in the way because I do not want to bend my cable. So with this project I decided to make it possible to prop my phone up and charge it at the same time, plus I also do not have a definite place for my watch to charge it just kinda goes where it goes so I decided to give it a home by adding a place for the charger to sit that the watch can still magnetize to. I also sometimes use pencils and just leave them on my desk after homework so I decided to make a place for the pencils to go when I'm done and its in a convenient place because its right next to my charging phone which I always grab when I finish homework.
https://www.tinkercad.com/things/k1PvzzaOsLC?sharecode=uSFphaw1MArKa1wkRr8A97d2aWtYawkSX3D9LJoSe7M
This is my TinkerCad Final Project link ^
I really enjoyed this tech week because tinker cad was such a fun program and easy to pick back up again even after not using it in a long while. Even with my ego and thinking I already knew everything going into it I learned some things from tinker cad and in tinker cad, tinker cad opened a new part of my brain I didn't know I had allowing me to think out of the box to find a solution to a problem. That statement leads me to my next statement, I thought one of the best parts of Tinker Cad was that my creative part of my brain was able to be released in full as Tinker Cad enabled me to become my favorite self because I have never felt that feeling before, coming up with something in your head and then watching it come to life Infront of you. My ABSOULTE FAVORITE part was definitely sharing my designs with my friend and them sharing theirs with me I loved to see others innovation and how I could incorporate some of their ideas into my own work in the future because of the CSMTech family everyone was always nice and supportive of what you designed not to mention they were critical but in a good way I was always given good advice on how to improve my designs. As much as I loved this tech week I had my problems with it too, where in all actuality my problems have to do with how much I loved it. It was too short! We had a LOT of time to complete each tutorial and I wish that we were given more free projects because my favorite part was doing it myself and not following instruction I really liked to changing the final image in the tutorials because it was more fun to express myself but I only had one chance to express myself which was during the one where we could do anything but if there were more of those I feel the project would be a lot more fun and add to the already amazing experience. All and all I really enjoyed this tech week and feel that a lot of others would agree with me.
Page updated
Report abuse