PELLET STOVES

Comprehensive Ash & Clinker Removal: Thoroughly cleaning out the burn pot, ash pan, heat exchanger tubes, and internal drop chutes.

Exhaust & Intake Vent Cleaning: Removing fine fly-ash accumulations from the direct-vent pipe and fresh air intake screen.

Combustion & Convection Blower Maintenance: Deep cleaning dust and debris off both fan blades and oiling motor bearings if applicable.

Hopper & Auger Tube Vacuuming: Clearing out built-up sawdust, pellet fines, and obstructions to prevent auger motor jams.

Igniter & Burn Pot Alignment: Inspecting the electric auto-igniter element and cleaning the burn pot holes to ensure fast, reliable ignition.

Door Glass & Gasket Refurbishing: Swapping out old, frayed fiberglass rope gaskets and removing baked-on carbon soot from the ceramic glass.

Internal Firebox Baffle Cleaning: Disassembling and cleaning behind the interior baffle plates where hidden fly-ash collects.

Proof-of-Fire & Vacuum Switch Testing: Verifying that essential safety pressure sensors and snap discs shut down the auger if a failure occurs.

Control Board & Thermostat Diagnostics: Testing the digital control panel, heat sensors, and remote wall thermostat circuits for proper cycling.

Auger Motor & Feed Rate Calibration: Evaluating the electrical voltage going to the feed motor and adjusting feed rates for efficient pellet combustion.

Ventilation Seal & Integrity Inspection: Checking all inner silicone gaskets and aluminum vent joints for dangerous exhaust leaks inside the home.

Clearance-to-Combustibles Audit: Confirming the non-combustible floor protector (hearth pad) and wall clearances meet manufacturer safety codes.

Electrical Safety & Grounding Check: Testing the built-in surge protection and power cords for signs of wear, fraying, or electrical overload.

Component Replacement: Installing fresh combustion blowers, convection fans, auger motors, or digital motherboards.

Igniter Element & Sensor Upgrades: Replacing burned-out heating elements, optical sensors, and exhaust thermistors.

Ceramic Door Glass Replacement: Swapping out cracked, broken, or permanently clouded high-temperature safety glass.

Pellet Insert & Stove Installation: Code-compliant, professional setup of high-efficiency pellet inserts or freestanding living room models.

Direct-Vent Wall & Roof Kit Installs: Building complete factory-sealed venting lines with proper outside wall thimbles and termination caps.

Remote Control & Wall Switch Upgrades: Installing modern wireless smart remotes, timers, and digital thermostats