VNA-PR1 1-6200

Arinst VNA-PR1 1-6200 Portable vector network analyzer

VNA-PR1 1-6200MHz Nework Analyzer

ARINST VNA-PR1 portable two-port vector network analyzer is designed to measure the matching characteristics of passive and active radio devices (antennas, cables, filters, attenuators, amplifiers), check the integrity of high-frequency cables, measure their parameters and other amateur radio measurements.

The device measures parameters S11 and S21, voltage standing wave ratio (VSWR), impedance, admittance, phase, group delay time (GD), losses and distance to cable fault.

For example, you can use the instrument to do the following:

• Perform impedance matching using the Smith diagram

• Measure the standing wave coefficient

• Measure the frequency response of active devices

• Measure attenuation in the cable

• Measure the distance to damage in the cable or its length

Advantages of vector network analyzer VNA-PR1 1-6200MHz

• a 4-inch color touch screen allows you to quickly configure scanning parameters and display measurement results

• simple and intuitive on-screen interface of the device

• wide range of operating frequencies: from 1 to 6200 MHz

• high scanning speed - 1000 points / s

• low error of reflection coefficient measurement: 0.25 dB and 0.7° over the entire frequency range

• adjusting the output power of the probe signal generator

• the ability to display up to four independent markers on all graphs, allowing an accurate assessment of the measured parameter

• displaying almost all possible interpretations of the reflection coefficient

• saving 32 user presets and 32 measurement results – traces

• setting the SWR threshold line for Smith, Polar, SWR, and Log charts. Amp (in S11 measurement mode)

• ability to measure the distance to damage and loss in the cable

• ability to compensate for the electrical length of the cable

• shift of the amplitude scale when measuring the frequency response of active devices and attenuators

• low weight and dimensions: 400 grams with "pocket" dimensions 150 × 81 × 27 mm

• intelligent system for determining the maximum charging current depending on the power source

• built-in 5000 mAh battery provides up to 2.5 hours of battery life

SPECIFICATIONS ARINST VNA-PR1 1-6200MHz