Arinst SSA R2

Arinst SSA R2 Portable Spectrum Analyzer  

Arinst SSA R2 Portable Spectrum Analyzer  

Arinst SSA R2 is a portable panoramic spectrum analyzer designed to display signal spectrums in the frequency range from 35 to 6200 MHz.

The analyzer finds the amplitude and frequency of spectral components of the analyzed process. Spectrum analyzer can operate with signals for all widely used technologies: Wi-Fi, 2G, 3G, 4G, LTE, CDMA, DCS, GSM, GPRS, GLONASS and others.

• frequency range: 35 — 6200 MHz

• Dynamic range for 35-3000 MHz band: 75 dB

• Dynamic range for 3000-4500 MHz band: 70 dB

• Maximum Span: 6165 MHz

• BW: 200 kHz, fixed

• Scan speed for a viewing band of more than 100 MHz: 700 MHz/sec

• Sweep 100 MHz: < 0.25 sec

• Noise floor up to 3000 MHz: < - 90 dBm

• Noise floor 3000 - 4500 MHz: < -85 dBm

• Noise floor 4500 - 6200 MHz: < -80 dBm

• Wave impedance: 50 Ohm

• VSWR at the operating frequency range: < 1.5

• Internal attenuator: 0 — 30 dB

• Error with attenuation up to 10 dB: 2 dB

• Error with attenuation from 10 to 20 dB: 5 dB

• Error with attenuation from 20 to 30 dB: 8 dB

• The output power of the tracking generator: -15...-25 dBm

• Accuracy within the dynamical range: 2,0 dB

• Maximum input power at attenuator 0 dB: 10 dBm

• Maximum input power when the attenuation is above 20 dB: +20 dBm

• Maximum input measured signal: +10 dBm

• Maximum input DC voltage: 25 Volts

• Maximum current consumption when running on battery: 450 mA

• Maximum current draw when running from USB: 500 mA (when charging)

• Battery: 2000 mAh

• Time battery life: 3 hours

• Battery charging time: ~ 5 Hours

Principle of operation

The spectrum analyzer is a portable device that is connected to the measured circuit and has an independent power supply. The device has a 3.2" color resistive screen to display the signal spectrum and to control the device.

The device is controlled by one of three ways:

- by buttons and touchscreen on the device.

- by an Android powered smartphone or tablet.

- by a PC or laptop with Windows operating system

The data between the analyzer and smartphone/tablet/PC is transmitted through Bluetooth or USB-cable. The Bluetooth range is up to 10 m (Password for connecting via Bluetooth: 1234).

All the measured data is displayed in real time on the screen of the smartphone/tablet/PC.

You can install the analyzer software to control by smartphone or tablet from the Google Play or download from here.

You can download the analyzer software to control by PC or laptop from here. Windows 7 or higher and the latest version of Java Virtual Machine are required for the correct work of application. The application requires full (100%) support for OpenGL version 2.1 and higher.

Management analyzer with external programs

There is a possibility of device control using external programs.

You can send the device a command to make a measurement (scanning range) with the following parameters:

start frequency

stop frequency

measuring step

the value of the attenuator

After the command completes, the device Arinst SSA-TG R2 will send the client device (microcontroller, computer, mobile device, etc.) a message containing the measured values of the amplitudes for the given frequency values. The user can record the received data to a file, database, etc.

Users can customize automatic measurements and use the spectrum analyzer Arinst SSA-TG R2 in their system.

An example can be downloaded from here.

Basic functions of the analyzer software (when viewed via a tablet/phone)