Embedded Files
Compared to the smaller VideoMic GO, the Rode VideoMic camera-mount shotgun microphone offers battery powering, extended low-end response, and customizable audio settings. Its switchable pad and bass roll-off optimize it for mobile journalists, vloggers, and run-and-gun shooters in loud or rumble-heavy environments.
This shotgun microphone features an integrated shockmount that mounts directly to your DSLR, mirrorless, or video camera and reduces noise from vibrations and camera handling. The windscreen design reduces wind noise, making it well suited for outdoor shoots. The attached 3.5mm TRS cable ensures easy hookup to your camera, and the dual-mono output means that no channel selection is necessary on your recording device.
SPECS
Microphone
Form Factor
Stand/Boom Mount
Sound Field
Mono
Operating Principle
Line Gradient
Capsule
Electret Condenser
Diaphragm
0.5" / 12.70 mm
Polar Pattern
Supercardioid
Orientation
End Address
Circuitry
Solid-State (JFET)
Pad
-10 dB
-20 dB
High-Pass Filter
80 Hz
Tone Adjustment
None
Gain Adjustment
None
Indicators
1 x Single LED (Power)
On-Board Controls
High-Pass Filter, Pad, On/Off
Windscreen
Foam (Included)
Performance
Frequency Range
40 Hz to 20 kHz
Maximum SPL
134 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
Off-Axis Rejection
4 dB at 60°
16 dB at 120°
12 dB at 180°
Impedance
200 Ohms
Sensitivity
-38 dBV/Pa at 1 kHz
Output Level
6.9 dBu (Max)
Dynamic Range
114 dB
Signal-to-Noise Ratio
74 dB A-Weighted
Equivalent Noise Level
20 dB A-Weighted
Connectivity
Analog Output
1 x 1/8" / 3.5 mm TRS
Number of Conductors
2
Wireless Connectivity
None
Power
Operating Voltage
9 V (Battery Power)
Operating Current Consumption
5 mA
Battery Type
1 x 9 V (Not Included)
Approximate Battery Life
100 Hours
Physical
Color
Black
Mounting
Camera/Shoe-Mount, Shockmount (via Integrated Hardware)
Mounting Thread Size
3/8"-16 Female
Included Case
None
Construction Material
ABS
Dimensions
ø: 3.86 x L: 9.76" / ø: 98 x L: 248 mm
Weight
6.03 oz / 171 g
RODE VideoMic.pdfReport abuse