Are you looking for a TP-Link WiFi Extender setup? Are you getting slow WiFi connectivity in your room? Do you want to extend the WiFi coverage? Whether you live in a big home or office, you will need a TP-Link WiFi extender. But to extend the network connectivity and signals, you need to perform a TP-Link extender setup.
Here, you will get step-by-step instructions to set up the TP-Link extender.
TP-Link Extender Setup
Extenders are mainly used for strengthening the WiFi network connection by repeating the signals. TP-Link extender is one of the devices with which you can enjoy the high-internet speed and maximum internet connectivity in your home or workplace. It gives strength to the extender and expands the network. With this extender device, you can easily remove the dead zones from your smart home or office.
Go through the below simple guidelines for TP-Link Wifi Extender Setup on your device. Follow all the steps carefully to extend the coverage or range of the wireless network:
Firstly, place your TP-Link extender near the router. Plug your extender into the electrical socket to supply the power.
After that, connect your TP-Link extender and your device by using an Ethernet cable. Make sure that the Ethernet cable that you are using is not broken or faulty.
Launch an internet browser from your devices such as internet explorer, Mozilla Firefox, or any other. Type http://tplinkrepeater.net in the address bar of the internet browser.
A new window pops up on the screen asking you to enter the username and password for the TP-Link extender setup. The default username and password are admin.
Both username and password are case-sensitive. So, ensure that you have entered the correct username and password as the wrong entry may lead to several errors.
Tap on the Quick setup and then on the Next button to start the TP-Link extender setup process.
Thereafter, you need to select your country, region, and language. Click on the next button to proceed further. After that, your device will start searching for the available nearby networks.
In the next step, choose your network name from the available list of networks that you want to extend. Tap on the Next button to proceed further.
At last, the screen will ask you to enter the router’s network password. Click on the Next button. Finally, you have completed the TP-Link extender setup to the router.
Follow the below steps to configure the TP-Link extender setup on your device:
Firstly, log in to the TP-link portal webpage by using the login credential details.
Ensure that you have a physical set up with a TP-Link WiFi range extender.
Go to the settings in the router home page for your web browser of the computer.
Click on the WPS option and enable the WPS option to accept the TP-link extender options.
Go to the AP pin and enable it. Click on it to generate a new PIN. Choose the default option to get the default PIN.
Press the WPS button on the TP-Link range extender. Click on the connect option and also specify the PIN of the client.
In the next step, map the PIN and click on Connect to allow the connections. In this way, you will configure the extender. It will boost internet connections.
Once you complete the TP-Link WiFi extender setup, you can move the extender device to its ideal location. If you want to get the ultimate WiFi performance then you need to place your TP-Link extender in such a location where you get at least three bars of the wireless network connectivity. If there are more network bars, you will enjoy better network connectivity. So, use the signal indicator to find the best position for your TP-Link extender.
Looking For Linksys extender setup instructions? this post is all about How to Setup Linksys range extender with Existing Router. Please read the post till last and Follow the given steps for Successful installation.
extender.linksys.com URL is used to execute web-based Linksys extender setup page. WiFi extenders are specially designed to remove and strengthen your dead network spots and home wireless network, respectively. The WiFi boosters amplify the wireless signals received from the existing home WiFi router and retransmit them in boosted form. Thus, the WiFi signals strength increases in almost every corner of your home or workplace.
Important Point: The above-mentioned steps are for non-configured WiFi range extenders. In case your Linksys range extender is already configured, then refer our next section.
The very first thing for the Linksys WiFi extender setup is to log into its web-based admin panel. Consider the below-mentioned steps for login:
Place your Linksys range extender near to your home WiFi router.
Turn on your Linksys extender and wait for a few minutes until the power LED turns amber to solid green.
After that, take an Ethernet cable and try to connect your WiFi extender to the router.
Run any web browser on your desktop or laptop and visit extender.linksys.com address.
Enter the default WiFi extender login credentials, and then tap the ‘Log In’ button.
You will be redirected to Linksys extender web-based admin panel.
Can’t connect to extender.linksys.com web-based page? If yes, then you might be already done with Linksys setup. So, use the following steps to access extender.linksys web page:
For the Windows Operating System
Click on the ‘Start’ button.
Open the ‘File Explorer.’
Right-click on your respective Linksys extender model name, under the network section.
Hit on the ‘View device web-page.’
Enter the default login credentials, and then click ‘OK’ button.
Now, try to open extender.linksys.com web page.
For the MAC Operating System
Run ‘Safari’ web browser on your MAC device.
Open the ‘Bookmarks’ tab.
Select the ‘Bonjour’ from the drop-down, and then double-click on it.
Enter the Linksys extender default login credentials.
Now, retry to connect to Linksys setup via extender.linksys.com.
The Linksys WiFi range extender setup can be done manually via extender.linksys or through WPS functionality. Many users consider the manual method as WPS functionality is limited to fewer WiFi extender models.
Important Tip: You do not require any CD to perform manual Linksys extender setup.
Once you have reached the Linksys extender setup web page, try to configure your WiFi range extender’ settings as per the following guidelines:
Prerequisites for manual Linksys WiFi range extender setup:
Try to place your Linksys WiFi extender in the same room as your home WiFi router.
Make sure you have a reliable Internet connection.
Ensure you have a proper electric power supply.
Linksys extender setup steps:
Connect your Linksys WiFi extender to your existing home WiFi router with the help of an Ethernet cable.
Run any web browser and visit 192.168.1.1 web page.
You land on the Linksys extender admin panel.
Enter the default Linksys extender login credentials.
Hit on the ‘Log In’ button.
You are prompted to Linksys extender admin panel.
Follow the on-screen instructions to configure Linksys WiFi extender.
Once done, hit on the ‘Apply’ button to save the last changes.
Linksys WiFi Extender Setup: WPS Method
WPS, aka, wireless protected setup method. It is one of the simplest methods to set up a Linksys range extender. Consider the below-mentioned steps to perform WPS:
Place your Linksys WiFi range extender near to your home WiFi router.
Plug it into an electric power outlet and wait for a few minutes.
Once the power LED turns from solid amber to green, press the WPS button present at the back or side panel of the extender device.
Unplug, the device and place it a bit far from your router.
Try to connect your desktop or laptop with an extended network to test the live internet connection.
That’s it! You are done here with the Linksys Wifi extender setup.
Steps for Linksys Extender Firmware Update
Firmware is a software that contains a set of rules and instructions. It manages both the ALU and control unit of the device. Manufacturers keep on releasing the latest firmware updates regularly to keep their devices compatible with latest network devices. It also protects from malware and virus attacks. Therefore, it’s good to keep the firmware up-to-date. Follow the below-mentioned steps to update Linksys extender firmware:
Connect your Linksys range extender to the router with the help of an Ethernet cable.
Turn on your desktop or laptop and connect it to your existing wireless network.
Run any web browser and visit extender.linksys.com web address.
Enter the Linksys extender login credentials.
Hit on the ‘Log In’ button.
You will land on the ‘Linksys extender setup’ web page.
Tap on the ‘Maintenance’ button.
Click on the ‘Firmware Update’ option.
If any latest firmware update is available, it will automatically download and install on your WiFi range extender.
Important Tip: While upgrading your firmware version, your Linksys range extender reboots a few times. Make sure there is no power cut.