Ultrasonic Sonar/Radar system using Arduino:

Project description:

                            The aim of this Arduino Radar project is to achieve a radar system prototype based on an Arduino board that detects stationary and moving objects.  In this project a HC-SR04 Ultrasonic sensor is used that is connected to a servo motor.An ultrasonic sensor is a proximity sensor that is used to measure the distance of a target or object. It detects the object by transmitting ultrasonic waves and converts the reflected waves into an electrical signal. The servo motor helps to rotate the HC-SR04 Ultrasonic sensor from 0° to 180°.If any object comes under the range of the ultrasonic sensor it starts to detect the object, at that time the graph interface inside the software becomes red in the object area. The graphical representation on the PC/Laptop is made using the "Processing" application that is provided with the project.

 Components used:

• Arduino UNO R3

• HC-SR04 Ultrasonic Sensor  

• SG90 Servo Motor  

• Mounting Bracket for Ultrasonic Sensor 

• Connecting Wires  

• Power Supply

What you get with the project:

• Fully assembled project .

• Project Report(30-40 pages)  that you need to submit with the project.

• Circuit diagram and the Code of the project.

• Assistance for your project till submission.

• Datasheets of the IC's and components used in the project.

• Processing application for graphical representation.