Utilizing turf pellet device correctly

As all of us understand, the grass pellet equipment is named for the smooth surface area of the feed created, the high hardness of the pellets, as well as the inner treating, which can enhance the nutrient absorption of pets. According to different basic materials, pellets that can be eaten by livestock are directly created with journalism of the grass pellet maker.

However, throughout a recent return browse through to an old customer, our staff located some issues brought on by incorrect use of the yard pellet equipment. The complying with are a few troubles and solutions that Richi Machinery has compiled for you.

Related post: grass pelletizer

( 1) Are the generated pellets curved and also broken?

Reason: This situation is often triggered by the pellets leaving the yard pellet maker. When the position of the cutter is adjusted further from the surface area as well as the blade side is boring, the pellets are damaged or torn by the cutter instead of being squeezed out from the die hole. Cut off, currently some pellets are bent to one side and also many cracks show up beyond. Throughout the process of entering the cooler for cooling down or transportation, the pellets have a tendency to break from these cracks, causing way too much pellet powder generated.

Enhancement approach:

a. Increase the compression ratio of the mold and mildew, consequently raising the density and also hardness of the pellets.

b. Grind the raw products finer to increase the density of pellets as well as avoid the feed from being loose.

c. Readjust the distance between the cutter and the die surface or change the cutter with a sharper one.

( 2) Is the surface of the pellets uneven?

This circumstance is that the powder used for granulation contains raw materials with big pellets that have not been crushed or semi-crushed. As a result of not enough conditioning during the yard pellet device conditioning process, the pellets are relatively tough and also fairly huge. After going through the mold and mildew of the lawn pellet machine, when the pores are not well combined with various other basic materials, the pellets show up irregular.

Renovation technique: properly manage the thickness of powdered feed, to make sure that all resources can be totally softened during conditioning; for basic materials containing even more fiber, vapor bubbles are easily blended, so do not include way too much to this formula. lots of steam.

( 3) Is the color of individual pellets or pellets irregular?

This circumstance prevails in the production of aquafeed, mostly materialized in that the color of specific pellets squeezed out from the grass pellet machine is darker or lighter than that of other regular pellets, or the surface shade of a single pellet is inconsistent, thus influencing the appearance top quality of the whole batch of feed.

Related post: lucerne pellet mill machine

Renovation technique: mostly to manage the blending harmony of each element in the formula as well as the blending uniformity of the included water; boost the tempering efficiency, control the toughening up temperature if essential, and also utilize a lower tempering temperature to minimize the color change; Control the return material. For solutions that are prone to "uneven shade", attempt not to use the return product to directly powder. The return material should be combined with the raw products and afterwards shattered once more. The mold with ensured quality is used to regulate the dimension of the die hole. End up, sand the die hole if essential prior to use.

2. Working concept of RICHI turf pellet equipment

Ring die lawn pellet machine is among the primary tools of RICHI grass pellet feed assembly line, the feed from powder state to pellet development need to be completed via four areas:

( 1) The product is moved to the modulator through the speed-regulating feeding auger. In order to acquire great granulation benefits ( rise outcome and also top quality), after including hot steam for conditioning, the product is brought near the ring die cover and the inner wall of the die (feeding area) by gravity as well as centrifugal force created by the rotation of the ring die.