[Getting Started]
Tone Track - Echo & Arp
1. Connecting to Track 3
Add a synth or any tone based instrument to an audio track. We're using "Phoenix" from Gadget.
Connect Prism to the audio track and filter the MIDI input input to channel 3 as we’ll use track 3 in Prism.
.
2. Adding Notes with Echo
'Track Select State -> Track 3 -> Press FUSE to go to Track 3's FUSE engine
.
Using [ECHO]
[ECHO] lets us select and play another track's SEQ.
What makes [ECHO] powerful is while multiple tracks are playing from the same SEQ, each track can still play the SEQ from a different starting point, for a different amount of time, at a different speed, and with different FX and transformations applied.
Turning on [ECHO]
1. Press [ECHO]
2. Long Press a Trig to Select a Source Track
3. Go to Track 3's SEQ
Track 3's SEQ trig values are now locked to track 2. To add or remove notes go to track 2.
.
3. Using the Track Arp
Change style from OFF
Change style from OFF
Let's make something interesting
1. Apply Some Choke
2. Change the # of Arp Steps
3. Use <> to Select & Shift Steps
.
4. Filter Notes with Fuse
Finally, we'll go back to fuse to further shape the arp's Input
Press FUSE
Set the 'Poly' parameter to 2. This limits the number of notes coming from the SEQ to 2.
Set the 'Mode' to HIGH. This takes the 2 highest notes from the SEQ input stream.
Raise 'Oct' by one. this shifts the notes coming from SEQ by one octave.
Now we'll be playing the top two notes of our chord progression an octave above our chord track.
"Alright, alright, alright"
Go ahead and press play
.