Are you searching for a guide to performing Kodak ESP 5250 wireless setup? If yes, then you are at the right place. In this guide, you will get all the necessary information and some troubleshooting steps to deal with the HP Printer issues. Let’s get started.
Before starting with the wireless setup procedure, ensure that your computer has already installed the printer driver for smooth functioning. Now, let’s move on directly to the Kodak wireless printer setup.
Firstly, turn on your Printer and then click on the home button.
After that, use the up and down arrow and choose network settings. From there, navigate to the Wi-Fi setup wizard.
Choose WPS connection either by clicking on the physical button of the HP Printer or by tapping on the virtual button of your HP Printer’s software.
Choose the push-button configuration and select WPS for your wireless router.
On Printer’s control panel, click on OK, and you will notice the wireless network name will display on the list of available networks available.
Click on the network name (SSID) and fill in your password to complete the wireless setup procedure successfully.
You have to perform the above-mentioned steps if you want to perform the Kodak ESP 5250 wireless setup successfully.
Are you facing the issue of the Kodak Printer won’t connect to WiFi, then don’t worry as it is a common issue and is faced by several people? Now, let’s check out the steps to resolve the issue:
Firstly, ensure that your computer has installed a wireless card. If you don’t have one, then you can use a dongle. If you have a desktop computer with a PCI card slot, then you can also install the Wi-Fi PCI card so that your computer is available for wireless connections.
Now, connect the USB cable from the Printer to your computer. It is a necessary requirement for setting a wireless connection with the Printer. You can also remove the USB cable after connecting the computer and HP printer.
Into your computer, load the Kodak Printer disc and follow the instructions to complete the installation of drivers and software. The software will allow setting the Kodak Printer for wireless connection if the computer already has the wireless capabilities.
Tap on the home button on the Printer, and with this, the display screen will have several options for the Printer. You can use the arrow key to scroll down and choose the Wi-Fi setup wizard. Choose the OK button and then the wireless from the menu option and then tap on OK.
After completing the setup procedure, disconnect the USB cable. Now, turn off your printer and wait for some time and then turn it on. After starting it, you will see a Wi-Fi light appearing on the Printer. If the light flashes, then it states there is a connection problem, but if the light is steady, you have successfully connected it.
Suppose you have any issue related to HP Printers like how to connect Kodak Printer to Wi-Fi or Kodak Printer won’t connect to computer. In that case, you can check out Kodak ESP office 2150 manual as there you will get complete information regarding the setup procedure.
Related Post
Kodak printer won't connect to WiFi
Kodak printer setup utility windows 10