Wooden Engineering

1: This picture shows the separate wood pieces being glued together with the help of clamps.

2: This picture shows the wooden block after the outer rough sides had been removed, and an outline had been applied.

3: The outer part of the block had been removed to make an arc shape.

4: The inside of the box was removed using a bandsaw. (Although not pictured the back was removed before the cut)

5: The box was glued back together.

6: This is the inside of the box. (What was removed from the cut)

7: The front and the back of the inside piece were removed.

8: (Due to a lack of pictures the creation of the inside piece was not included) This picture shows the two pieces of the box being sanded down after an initial coat of polyurethane was applied.

This is a video of the box and how it functions. (This video was taken before the box received the coats of polyurethane).