You must have:

• Have 2 sound cards

• Have sound cards properly assigned

• Be properly wired

• Encode format set

Sound Card Set-Up in New Wave:

• Go to Setup/Soundcards screen

• In the Windows Sound Card List, click on the sound card to record from (Must be different a different sound card than Live/Automation Play card)

• Press the Assign button in the Record Box

Windows Sound card setup:

• Go to the Control Panel

• Double click on Sound

• Click on the Recording tab

• Click on the same sound card that was assigned for recording in New Wave

• Press Set Default

• Double click on the sound card

• Go to the Advanced Tab

• Set format to 16 bit 44100Hz 16bit stereo

• Uncheck both Exclusive Mode boxes

• Press Apply and OK

• Press OK

Set Encode Format in New Wave:

• Click on Setup/Set Record Format

• Press OK

• Select PCM 44.100 kHz, 16bit, Stereo 172 kb/sec

Voice track wiring, using a console, if on-board pc sound card is selected for recording:

• Wire the Audition output from the console to the blue Line-In on the pc (1/8" jack)