2026

Journal papers

Ochoa O., Cuan-Urquizo, E., Sandoval-Castro, XY., González, A. & Pal, A. (2026) A Modular Tendon-Driven Metamaterial Cylinders for Tunable Deformation in Soft Robotic Actuation. Smart Materials and Structures, 35, 07LT01.
Martínez-Magallanes, M., Barker Narváez AD., and Cuan-Urquizo, E., (2026) Design, additive manufacturing and mechanical characterization of a hybrid-strut, surface simple cubic metamaterial. Rapid Prototyping Journal, ACCEPTED.
Mora A., and Cuan-Urquizo, E., (2026) Tailoring the effective torsional stiffness of bioinspired tubular metamaterials through void distribution in staggered and non-staggered patterns. Journal of the Brazilian Society of Mechanical Sciences and Engineering, ACCEPTED.
Chapa, A, Achury Florián, Á. U., Serrano Ruiz, DE, Casas-Rodriguez, J. P., Cuan-Urquizo, E., Roman-Flores, A., & Urbina-Coronado, P. D., Flexible Additively Manufactured Honeycombs Under Impact Loading: Effect of Topology and Orientation, Advances in Materials Science and Engineering, 2026, 1234886, 12 pages, 2026.
Sotomayor-del-Moral, JA., Juan B. Pascual-Francisco, JB., Susarrey-Huerta O, Farfan-Cabrera LI, Estrada-Manzo V., and Cuan-Urquizo E., (2026) Fractal Metamaterial Beams: Tuning Dynamic Stiffness and Vibration Attenuation, Fractal and Fractional 10(7), 435.
Espejo-Aliaga, G.G., Cuan-Urquizo, E., & González, A. (2026) Experimental and computational characterization of additively manufactured rotational compliant joints: A stacking strategy for adjustment of their equivalent stiffness Results in Engineering, 31, 111599.
Hernández‐Peña, A., Pascual‐Francisco, J. B., Álvarez‐Trejo, A., Cuan‐Urquizo, E., & Farfan‐Cabrera, L. I. (2026). Viscoelastic Architected Bézier‐Lattice Metamaterials for Bioinspired Erosion‐Resistant Sandwich Structures. Advanced Engineering Materials, e70913.
Chapa, A., Valero-Ayala, K., Ceja-Morales, V., Fuentes-Juvera, L., Martínez-Magallanes, M., & Cuan-Urquizo, E. (2026). Additively manufactured hybrid Diamond–Gyroid lattices: mechanical characterization under compressive loads. Progress in Additive Manufacturing, 1-16.
Morales‐Vargas, E., Fuentes‐Aguilar, R. Q., Hernández‐Melgarejo, G., & Cuan‐Urquizo, E. (2026). A Computer Vision Approach for Performance Tracking of Robotic Compliant Systems. Engineering Reports, 8(1), e70582.
Ramírez-Gutiérrez, D. L., Cuan-Urquizo, E., & Roman-Flores, A. (2026). Functionally graded sinusoid-based metamaterials: Towards tailoring effective mechanical properties and deformation modes with a single design parametric function. Materials & Design, 115423.

Book Chapters

Savio G, Cuan-Urquizo E, Fiona Zhao Y, Álvarez-Trejo A, and Roman-Flores A. Lattice materials for additive manufacturing: geometric modeling and representation. In Benedetti, Berto and Shamsaei (Eds), Additive Manufacturing of Architected Metamaterials: Design, properties and applications (pp 3 -55). Elsevier.
Cuan-Urquizo E, Mora A, Ramírez-Gutiérrez, DL. Betancourt-Tovar, M, and Fuentes-Juvera LD. Additive Manufacturing of lattice materials: manufacturing processes and materials In Benedetti, Berto and Shamsaei (Eds), Additive Manufacturing of Architected Metamaterials: Design, properties and applications (pp 57 -91). Elsevier.

Conferences

R. Mangenot, A. Álvarez-Trejo, E. Cuan-Urquizo, DL Ramírez-Gutiérrez and A. Roman-Flores presented “Rational circle-based cubic Bezier Metamaterials: Synthesis, mechanics and additive”, 6TH International Conference on Materials Design and Applications 2026 (MDA 2026), Porto, Portugal
L. Mairle, DL Ramírez-Gutiérrez, E. Cuan-Urquizo and A. Roman-Flores presented “Mechanical characterization of additively manufactured functionally graded structures under twist”, 6TH International Conference on Materials Design and Applications 2026 (MDA 2026), Porto, Portugal
DL Ramírez-Gutiérrez, E. Cuan-Urquizo and A. Roman-Flores “Flexural properties of functionally graded beams: design through mathematical parametrization and experimental characterization”, 6TH International Conference on Materials Design and Applications 2026 (MDA 2026), Porto, Portugal

2025

Articles

Journal papers

Álvarez‐Trejo, A., Cuan‐Urquizo, E., & Roman‐Flores, A. (2025). Novel Surface‐Based Bézier Metamaterials: A Higher Degree of Parametrization toward Tailoring the Effective Properties under Compression. Advanced Engineering Materials, 27(22), e202500638.
Castro-Avilés, A., Martínez-Magallanes, M., Chapa, A., Álvarez-Trejo, A., Roman-Flores, A., Jiménez-Palomar, I., & Cuan-Urquizo, E. (2025). The mechanical properties of additively manufactured dome shaped structures reinforced with cellular patterns: a comparative study when fabricated with planar and curved layers. Progress in Additive Manufacturing, 10(12), 12023-12040.
Espejo-Aliaga, G.G., Perez-Santiago, R., González, A. & Cuan-Urquizo, E. (2025). Stiffness characterization of curved structures made of lattice materials: Additive manufacturing, measurements and numerical estimations. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 4644207251366839.
Chapa, A., Cuan-Urquizo, E., Roman-Flores, A., & Urbina-Coronado, P. D. (2025). Experimental characterization of the compression-compression fatigue performance in 3D printed flexible honeycombs. Materials Research Express, 12(5), 055801.
Herrera-Ramos, G., Mora, A., Álvarez-Trejo, A., Roman-Flores, A., Batres, R., Martínez-Magallanes, M., & Cuan-Urquizo, E. (2025). Additive manufacturing and mechanical characterization of cellular materials with novel graded designs. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 14644207251358810.
Cano-Arias, L., Arredondo-Soto, M., Cuan-Urquizo, E., & Gómez-Espinosa, A. (2025). Kinetostatic analysis and experimental validation of a flexure-based compliant gripper. Mechanics Based Design of Structures and Machines, 1-18.
Betancourt-Tovar, M., Cuan-Urquizo, E., & Roman-Flores, A. (2025). Design and micro-mechanics characterization of additively manufactured architected cylindrical structures. International Journal of Mechanical Sciences, 294, 110199.
Maldonado-Rosas, R., Alfaro-Ponce, M., Cuan-Urquizo, E., & Tejada-Ortigoza, V. (2025). Printability prediction of food formulations for 3D printing using a Gaussian Process Regression model. Journal of Food Engineering, 112534.
Arredondo-Soto, M., Cuan-Urquizo, E., Gómez-Espinosa, A., Roman-Flores, A., & Ahmad, R. (2025). Novel soft gripper with adjustable performance based on blade flexures. Journal of Mechanical Design, 147(3).
Ochoa, O., Méndez, E., Perez-Santiago, R., Cuan-Urquizo, E., Sandoval-Castro, X. Y., & González, A. (2025). Reconfigurable Soft Pneumatic Actuators with Metamaterial Reinforcements: Tunable Stiffness and Deformation Modes. Materials & Design, 113649.

Book Chapters

Conferences

Ochoa, O., Cuan-Urquizo, E., Perez-Santiago, R., González, A., Morales, D. S. G., Raatz, A., & Sandoval-Castro, X. Y. (2025, April). Metamaterial-Reinforced Origami Soft Actuators: Reconfigurable Stiffness and Deformation. In 2025 IEEE 8th International Conference on Soft Robotics (RoboSoft) (pp. 1-6). IEEE.
Rodriguez-Padilla, C., Román-Flores, A., Vazquez-Hurtado, C., Gonzalez-Hernandez, H. G., & Cuan-Urquizo, E. (2025, November). Motion Planning for Extrusion-based Additive Manufacturing using Robotics and Reinforcement Learning. In 2025 13th International Conference on Control, Mechatronics and Automation (ICCMA) (pp. 58-63). IEEE.
Halabe, A. S. G., Ramírez-Cedillo, E., Ochoa, O., Cuan-Urquizo, E., Sandoval-Castro, X. Y., & González, A. (2025, September). Empowering STEM Education in Mexico with an Open-Source Soft Robotics Gripper for Cobots. In 2025 World Engineering Education Forum-Global Engineering Deans Council (WEEF-GEDC) (pp. 1-6). IEEE.
Macías-Duarte, L. F., Rios Robledo, D., Sandoval-Padilla, S., Cuan-Urquizo, E., & Roman-Flores, A. (2025, March). Design of a Robotic Gripper with Compliant Mechanisms and Metamaterials to Facilitate Material Handling in a Learning Factory. In Conference on Learning Factories (pp. 265-272). Cham: Springer Nature Switzerland.

2024

Articles

Journal papers

García-Gutiérrez, M. E., Betancur, A. L. G., Cuan-Urquizo, E., Alvarado-Orozco, J. M., & González-Hernández, J. (2024). Numerical investigation of the effective mechanical properties of architected structures: a comparative study of flexural stiffness, homogenization, and elastic anisotropy. Materials Research Express, 11(11), 115801.
Mora, A., Herrera-Ramos, G., Ramirez-Gutierrez, D. L., Sanchez-Ante, G., Batres, R., Roman-Flores, A., ... & Cuan-Urquizo, E. (2024). Modeling and design of architected structures and metamaterials assisted with artificial intelligence. Materials Research Express, 11(12), 122002.
Ochoa O., E. Cuan-Urquizo, X.Y. Sandoval-Castro, and A. González, "Inverse design method for tailoring the deflection of beams with functionally graded metamaterials". accepted in Smart materials and Structures.
Paredes Pureco, P., L. Fuentes-Juvera, L.H. Olivas-Alanis, A. Roman-Flores and E. Cuan-Urquizo, "Novel additively manufactured dihedral tiling architected metamaterial conformed with pentagon and rhombus: design and mechanical properties" Material Research Express.
Rico-Baeza, G, E. Cuan-Urquizo, G.I. Pérez-Soto, and K.A. Camarillo-Gómez, Towards customized flexural properties of additively manufactured architected lattice beams via grading struts cross-section and targeted designed unit cell distributions, Accepted in Rapid Prototyping Journal.
Perez-Santiago, R., NJ. Hendrichs, N.J., G. Capilla-González, E. Vázquez-Lepe, and E. Cuan-Urquizo. The Influence of the Strain-Hardening Model in the Axial Force Prediction of Single Point Incremental Forming. Appl. Sci. 2024, 14, 5705.
Moreno-Núñez, B.A., M.A. Guerrero-Alvarado, A. Salgado-Castillo, C.D. Treviño-Quintanilla, E. Cuan-Urquizo, U. Sánchez-Santana, and G. Pincheira-Orellana, "Build and Raster Orientation Effects on CFRP Onyx/Aramid Impact Absorption", Composites Part C: Open Access (2024), 100485
Ochoa, O., M. Betancourt-Tovar, A.S. Espinosa-Curiel, A. Castro-Avilés, N. Granados, and E. Cuan-Urquizo, "Novel compliant mechanism-based auxetic metamaterial: Kinematic and experimental analysis". International Journal of Mechanical Sciences (2024) 274, 109478
Arredondo-Soto, A., E. Cuan-Urquizo, and A. Gomez-Espinosa, "Analytical Modeling and Validation of New Prismatic Compliant Joints Based on Zero Poisson's Ratio Lattice Structures". Journal of Mechanisms and Robotics (2024) 16(11),111008.
García-Ávila, Josué., González-Gallegos, C.P., Segura-Ibarra, V., Vazquez, E., Garcia-Lopez, E., Rodríguez, C.A., Vargas-Martínez, A., Cuan-Urquizo, E., Ramírez-Cedillo, E., Dynamic topology optimization of 3D-Printed transtibial orthopedic implant using tunable isotropic porous metamaterials, Journal of the Mechanical Behavior of Biomedical Materials (2024). 106479
Martinez-Magallanes, Perez-Santiago, R., Roman-Flores, A. & Cuan-Urquizo, E.. (2024). Flexural properties of additively manufactured structures reinforced with cellular and fractal patterns. Advanced Engineering Materials (2024), 26(7) 2301938.
Maldonado-Rosas, R., Pérez-Castillo, J. L., Cuan-Urquizo, E & Tejada-Ortigoza, V. (2024). The role of controlled voids shape on the flexural properties of 3D printed food: an approach for tailoring their mechanical properties. Virtual and Physical Prototyping, Vol. 19, No. 1, e2284816
Gómez-Castañeda, M., E. Cuan-Urquizo, AL. Giraldo-Betancur, C. Félix-Martínez, and J.M. Alvarado-Orozco, “Additive manufacturing and mechanical characterization of sinusoidal-based lattice structures: a numerical and experimental approach” Progress in Additive Manufacturing (2024), 9(2), 315-330.

Book Chapters

Conferences

2023

Articles

Journal papers

Rico-Baeza G, Pérez-Soto GI, Morales-Hernández LA, Cuan-Urquizo E, Camarillo-Gómez KA. Additively Manufactured Foot Insoles Using Body-Centered Cubic (BCC) and Triply Periodic Minimal Surface (TPMS) Cellular Structures. Applied Sciences. 2023; 13(23):12665.
Álvarez-Trejo, A., E. Cuan-Urquizo, and A. Roman-Flores, “Effective Young’s modulus of Bézier-based honeycombs: analytical modeling and the role of design parameters and curvature” (accepted in the journal of Thin-walled structures)
Mora, A., J. Palancares-Díaz, J. Varela-Soriano, M. Jimenez-Martínez, A Roman-Flores, L.I. Farfan-Cabrera, and E. Cuan-Urquizo. Computational study on the torsional properties of bioinspired tubular metamaterials (accepted in Mechanics of Advanced Materials and Structures)
Álvarez-Trejo, A., E. Cuan-Urquizo, D. Bhate, and A. Roman-Flores. Mechanical metamaterials with topologies based on curved elements: an overview of design, additive manufacturing and mechanical properties. 2023, Materials & Design, 233,112190.
Ochoa, O., E. Cuan-Urquizo, A. Álvarez-Trejo, A. Roman-Flores and R. Guerra Silva. “Additively manufactured auxetic metamaterial: Mechanical properties and their directional dependency”(accepted in Mechanics of Advanced Materials and Structures)
Cuan-Urquizo, E. and R. Guerra Silva, "Fused Filament Fabrication of cellular, lattice and porous mechanical metamaterials: a review", 2023, Virtual and Physical Prototyping, 18(1), e2224300
Chapa, A., E. Cuan-Urquizo, PD Urbina Corona and A. Roman-Flores, "Experimental characterization of the mechanical properties of 3D printed TPU auxetic cellular materials under cyclic compressive loadings" 2023 Rapid Prototyping Journal 29(9), 1800-1813.
Ramírez-Gutiérrez, D. E. Cuan-Urquizo, and R.Q. Fuentes-Aguilar, "Sine-based lattice plates: additive manufacturing and their mechanical properties when loaded out of plane" 2023 Rapid Prototyping Journal 29(9), 1773-1787.
García-Ávila, E. Cuan-Urquizo, E. Ramírez-Cedillo, C.A. Rodríguez, and A. Vargas-Martínez, Novel Porous Structures with Non-Cubic Symmetry: Synthesis, Elastic Anisotropy, and Fatigue Life Behavior, 2023, Mathematics and mechanics of solids, 28(4), 943 - 972.
Pérez-Castillo, J.L., A. Mora, R. Perez-Santiago, A Roman-Flores, R. Ahmad and E. Cuan-Urquizo,Flexural Properties of Lattices Fabricated with Planar and Curved Layered Fused Filament Fabrication, 2023, Materials, 16(9), 3451.
Moreno-Nuñez, B.A., Abarca-Vidal, C. G., Treviño-Quintanilla, C.D., Sánchez-Santana, U., Cuan-Urquizo, E., and Uribe-Lam, E. Experimental Analysis of Fiber Reinforcement Rings’ Effect on Tensile and Flexural Properties of Onyx™–Kevlar® Composites Manufactured by Continuous Fiber Reinforcement. 2023. Polymers, 15(5), 1252.
Arredondo-Soto, M., E. Cuan-Urquizo, A. Gómez-Espinosa, A. Roman-Flores, PD Urbina Corona, and M. Jimenez-Martinez; The compliant version of the 3-RRR spherical parallel mechanism known as Agile-Eye": kinetostatic analysis and parasitic displacement evaluation, 2023, Mechanisms and Machine Theory, 180, 105160
Rico-Baeza, G., E. Cuan-Urquizo, G.I. Perez-Soto, L.A. Alcaraz-Caracheo, and K.A. Camarillo-Gómez; Additively manufactured lattice materials with a double level of gradation: a comparison of their compressive properties when fabricated with material extrusion and vat photopolymerization processes, 2023, Materials, 16(2), 649.
Olivas-Alanis, L.H., A.A. Fraga-Martínez, E. García-López, O. Lopez-Botello, E. Vazquez-Lepe, E. Cuan-Urquizo, and C.A. Rodriguez; Mechanical properties of AISI 316L lattice structures via laser powder bed fusion as a function of unit cell features, 2023, Materials, 16(3), 1025.

Book Chapters

Conferences

Betancourt-Tovar, M., Cuan-Urquizo, E., Ayala-García, I. (2023). "Mechanical properties of additively manufactured cellular cylinders". SmarTec Digital Manufacturing. September, 28, 2023, Querétaro, México.
Castro-Avilés, A. Cuan-Urquizo, E. Jimenez-Palomar, I (2023). Non-planar additive manufacturing for industrial applicatios. 2do Congreso Internacional de Manufactura inteligente, Mecatrónica y Elementos Tecnológicos de la industria 4.0 MiMETi 2023. Queretaro, Queretaro.
Herrera-Ramos, G., E. Cuan-Urquizo (2023). "Functionally Graded Lattice Metamaterials for Material Property Tunability" 2° Congreso Internacional de Manufactura Inteligente, Mecatrónica y Elementos Tecnológicos de la Industria 4.0. October 25 -27, 2023, Querétaro, Mexico.
Álvarez-Trejo, A., E. Cuan-Urquizo, and A. Roman-Flores "Experimental characterization of the mechanical properties of 3D printed Bézier-based lattice beams". Solid Freeform Fabrication symposium. August 14 - 16, 2023, Austin, US.
Martínez-Magallanes, M., E. Cuan-Urquizo, E. Ramírez-Cedillo, and A. Roman-Flores "Out-of-plane mechanical properties of additively manufactured fractal reinforced structures". Solid Freeform Fabrication symposium. August 14 - 16, 2023, Austin, US.
Moreno-Nunez, B.A,, C.D. Trevino-Quintanilla, J. Espinoza-Garcia, E. Cuan-Urquizo, E. Uribe-Lam "Effect of Printing Parameters on the Internal Geometry of Products Manufactured by Fused Filament Fabrication (FFF)". Solid Freeform Fabrication symposium. August 14 - 16, 2023, Austin, US.
Arredondo-Soto, M., E. Cuan-Urquizo, and A. Gómez-Espinosa. "Analytical Modeling and Validation of New Prismatic Compliant Joints Based on Zero Poisson's Ratio Lattice Structures ",IDETC/CIE 2023, August 20 – 23, 2023, Boston, US
Diaz-de-Leon, A. E. Cuan-Urquizo, and A. Roman-Flores "Development of a Mechanisms Kit for hands-on learning for Mechanical Design Engineering Courses", 21st LACCEI International Multi-Conference for Engineering, Education, and Technology, Buenos Aires, Arg, July 17 - 21, 2023.

2022

Articles

"Mecanismos flexibles: piezas que no se mueven...se doblan" by M Arredondo-Soto, E Cuan-Urquizo y A Gómez-Espinosa.

Journal papers

Pascual-Francisco, J.B., L.I. Farfán-Cabrera, E. Cuan-Urquizo, A. Álvarez-Trejo, and A. Roman-Flores, Additive manufacturing and viscoelasticity evaluation of Bézier metamaterials fabricated via vat photopolymerization, 2022, Additive Manufacturing, 60, part B, 103281.
Diaz-de-Leon, A, E. Cuan-Urquizo, A. Roman-Flores, J.L. Gordillo. Bi-stability in Flexure beams: Introducing a Setup for Experimental Characterization. 2022, Applied Sciences 12(22) 11438.
Barreto, M., E. Cuan-Urquizo, J. Perez-Gonzalez, and J. Huegel. The use of conformal lattice metamaterials for relieving stress in lower limb sockets: a numerical and exploratory study. 2022, Journal of Engineering in Medicine, 236(11), 1635-1645.
Betancourt-Tovar, M. and E. Cuan-Urquizo. Increasing displacement range in 3D printed compliant joints via bio-inspired slot patterns: an exploratory study, 2022, Engineering Science and Technology, 101229
Martínez-Magallanes, M., E. Cuan-Urquizo, S. Crespo-Sánchez, A. Valerga, A. Roman-Flores, E. Ramírez-Cedillo, C.D. Treviño-Quintanilla. Hierarchical and fractal structured materials: Design, additive manufacturing and mechanical properties , 2022, Journal of Materials: Design and Applications (ACCEPTED)
Maldonado-Rosas, R., V. Tejada-Ortigoza, E. Cuan-Urquizo, D. Mendoza-Cachú, M. Morales-de la Peña, J.M. Alvarado-Orozco and O. Campanella, Evaluation of rheology and printability of 3D printing nutritious food with complex formulations, 2022, Additive Manufacturing, 103030.
Cáceres-C., C., E. Cuan-Urquizo and M. Alfaro-Ponce, Compliant cross-axis joints, a tailoring displacement range approach via lattice-flexures and machine learning, 2022, Applied Sciences 12(13) 6635.
González-García, J., Gómez-Espinosa, A., García-Valdovinos, L. G., Salgado-Jiménez, T., Cuan-Urquizo, E., & Cabello, J. A. E. (2022). Model-Free High-Order Sliding Mode Controller for Station-Keeping of an Autonomous Underwater Vehicle in Manipulation Task: Simulations and Experimental Validation. Sensors, 22(12), 4347.
Kuclourya, T. R. Monroy, E. Cuan-Urquizo, A. Roman-Flores and R. Ahmad. Scientometric Analysis and Critical Review of Fused Deposition Modeling in the Plastic Recycling context, 2022, Cleaner Waste Systems, 2, 100008.
Tejada-Ortigoza, V. and E. Cuan-Urquizo,Towards the Development of 3D-Printed Food: A Rheological and Mechanical Approach, 2022, Foods, 11(9), 1191.
Álvarez-Trejo, A.,E. Cuan-Urquizo, A. Roman-Flores, L.I. Farfan-Cabrera, L.G. Trapaga-Martinez, and J.M. Alvarado-Orozco, Numerical Characterization of the Mechanics of Bézier-Based Lattice-Beams, 2022, Key Engineering Materials, 913, 301-306.
Arredondo-Soto, M., E. Cuan-Urquizo, and A. Gómez-Espinosa; The compliance matrix method for the kinetostaic analysis of flexure-based compliant parallel mechanisms: conventions and general force-displacement cases, 2022, Mechanisms and Machine Theory, 168C, 104583.
Cuan-Urquizo, E., A. Álvarez-Trejo, A. Robles Gil, V. Tejada-Ortigoza, C. Camposeco-Negrete, E. Uribe-Lam and C.D. Treviño-Quintanilla, Effective stiffness of fused deposition modelling infill lattice-patterns made of PLA-wood material, 2022, Polymers, 14(2), 337.
Barreto-Cubero, Andres J., A. Gómez-Espinosa, J.A. Escobedo Cabello, E. Cuan-Urquizo, and S.R. Cruz-Ramírez. 2022. Sensor Data Fusion for a Mobile Robot Using Neural Networks Sensors 22, no. 1: 305.
González-García, J.; A. Gómez-Espinosa, L.G. García-Valdovinos, T. Salgado-Jiménez, E. Cuan-Urquizo, J.A.E. Cabello, 2022 Experimental Validation of a Model-Free High-Order Sliding Mode Controller with Finite-Time Convergence for Trajectory Tracking of Autonomous Underwater Vehicles, . Sensors, 22, no. 2: 488.

Book Chapters

Tejada-Ortigoza, V., E. Cuan-Urquizo, L.E. García-Amezquita, and J. Welti-Chanes (2022). 3D Printed Snacks. In S. Serna-Saldivar (Ed). Snack Foods 1st Edition CRC Press.

Conferences

Maldonado-Rosas, R., V. Tejada-Ortigoza, E. Cuan-Urquizo, and D. Mendoza-Cantú; Rheology and printability of 3D printed food-ink formulations and their mechanical properties after post-processing, 2022, CIBIA XIII, Medellín, Colombia.
Perez, A., A. Valdes, G. Niño, C. Tamayo, A. Roman-Flores and E. Cuan-Urquizo; Mass Reduction and Enhanced Geometry of a 0.196 Liters Small IC Engine Piston Through Topology Optimization Simulation and Finite Element Analysis, 2022, SAE Powertrains, Fuels & Lubricants Conference & Exhibition
Puente Flores, A., A Roman-Flores, E. Cuan-Urquizo, C. Vazquez, and P.D. Urbina Coronado; Design Of A Single Actuated Soft Gripper With Compliant Mechanisms, 10th International Conference on Control, Mechatronics and Automation (ICCMA) , Belval, Luxembourg.

2021

Articles

Journal papers

Pérez-Castillo, J.L., E. Cuan-Urquizo, A. Roman-Flores, O. Olvera-Silva, V. Romero-Muñoz, A. Gómez-Espinosa, and R. Ahmad, “Curved layered fused filament fabrication: An overview”, 2021, Additive Manufacturing, 47, 102354.
Rodriguez-Padilla, C., E. Cuan-Urquizo, A. Roman-Flores, J.L. Gordillo, and C. Vázquez-Hurtado, “Algorithm for the conformal 3D printing on non-planar tessellated surfaces: applicability in patterns and lattices”, 2021, Appl. Sci. 11(16), 7509.
Arredondo-Soto, M., ,E. Cuan-Urquizo, A. Gómez-Espinosa, "A review on tailoring stiffness in compliant systems, via removing material: Cellular Materials and Topology Optimization", 2021, Appl. Sci. 11(8), 3538.
Álvarez-Trejo, A.,E. Cuan-Urquizo, A. Roman-Flores, L.G. Trapaga-Martinez, and J.M. Alvarado-Orozco, “Bézier-based metamaterials: synthesis, mechanics and additive manufacturing ”, 2021, Materials & Design, 199C, 109412.
González-García, J.; Narcizo-Nuci, N.A.; García-Valdovinos, L.G.; Salgado-Jiménez, T.; Gómez-Espinosa, A.; Cuan-Urquizo, E.; Cabello, J.A.E. Model-Free High Order Sliding Mode Control with Finite-Time Tracking for Unmanned Underwater Vehicles. Appl. Sci. 2021, 11, 1836.
Gómez-Espinosa A, Rodríguez-Suárez JB, Cuan-Urquizo E, Cabello JAE, Swenson RL. Colored 3D Path Extraction Based on Depth-RGB Sensor for Welding Robot Trajectory Generation. Automation. 2021; 2(4):252-265
Molina-Leal, A.; Gómez-Espinosa, A.; Cabello, J.A.E; Cuan-Urquizo, E.; Cruz-Ramírez, S.R., "Trajectory Planning for a Mobile Robot in a Dynamic Environment using an LSTM Neural Network", 2021, Appl. Sci. 11(22), 10689.

Conferences

Álvarez-Trejo, Cuan-Urquizo E., Román-Flores A., Farfan-Cabrera, LI, Trápaga-Martínez, LG and Alvarado-Orozco JM. Numerical characterization of the mechanics of Bézier based lattice beams. 8th International Conference on Mechanical, Materials and Manufacturing (ICMMM 2021), Sept 25-27 2021.
Gómez-Castañeda, M.; Cuan-Urquizo, E. Giraldo Betancur A, and Alvarado-Orozco J.M. “Apparent Mechanical Properties of Sinusoid-based Lattice Structure: Numerical Analysis and Experimental Validation”, Annual International Solid Freeform Fabrication Symposium, Austin Tx, US. August 2-4, 2021.

2020

Articles

"Diseño de metamateriales reticulados: ciencia inspirada en la naturaleza", (https://transferencia.tec.mx/2020/05/06/diseno-de-materiales-reticulados-ciencia-inspirada-en-la-naturaleza/ ) by , E. Cuan-Urquizo and A. Román-Flores

Journal papers

Uribe-Lam, E., C.D. Treviño-Quintanilla, E. Cuan-Urquizo, and O. Olvera-Silva, “Use of additive manufacturing for the fabrication of cellular and lattice materials: A review ”, 2020, Materials and Manufacturing processes (10.1080/10426914.2020.1819544)
Cuan-Urquizo, E., F., Shalchy, and A. Bhaskar. "Compressive stiffness of staggered woodpile lattices: mechanics, measurement, and scaling laws", 2020, International Journal of Mechanical Sciences, (Vol. 187, 105932 ).
Ramírez-Gutiérrez, D., E. Cuan-Urquizo, and A. Gómez-Espinosa, “Adaptable bed for curved-layered fused deposition modelling of non-planar structures: a proof of concept”, 2020, 3D Printing and Additive Manufacturing, (Vol 7. Issue 4, 198-201).
McCaw, J.C.S., and E. Cuan-Urquizo “Mechanical characterization of 3D printed, non-planar lattice structures under quasi-static cyclic loading”, 2020, Rapid Prototying Journal (Vol. 26 No. 4, pp. 707-717 ).

Conferences

Roman-Flores, A.; Vargas-Martinez, A.; Cuan-Urquizo, E. ; Lozoya-Santos, J.; Morales-Menendez, R.; Ramirez-Mendoza, R.; Urbina-Coronado, P. "Design Of Interactive Learning Cyber-Physical Tools for Mechanical Design Engineering Courses", EDUCON 2020, Porto, Portugal, April 2020.

2019

Articles

"Impresión 3D: bonita, pero… ¿qué tanto resiste?", (https://transferencia.tec.mx/2019/06/04/impresion-3d-bonita-pero-que-tanto-resiste/ ) by E. Cuan-Urquizo

Journal papers

Cuan-Urquizo, E., J.I. Espinoza-Camacho, A. Álvarez-Trejo, E. Uribe, C.D. Treviño-Quintanilla, S. Crespo-Sanchez, A. Gomez-Espinosa, A. Roman-Flores and O. Olvera-Silva, “Elastic response of lattice arc structures fabricated using curved-layered fused deposition modelling”, 2019, Mechanics of Advanced Materials and Structures, DOI: https://doi.org/10.1080/15376494.2019.1682728
Cuan-Urquizo, E., M. Martinez-Magallanes, S. Crespo-Sanchez, A. Gomez-Espinosa, O. Olvera-Silva, and A. Roman-Flores, “Additive manufacturing and mechanical properties of lattice-curved structures”, 2019, Rapid Prototyping Journal, 25(5), 895-903.
Gomez-Espinosa, A., R. Castro Sundin, I. Loidi Eguren, E. Cuan-Urquizo, and C.D. Treviño-Quintanilla, “Neural Network Direct Control with Online Learning for Shape Memory Alloy Manipulators”, 2019, Sensors, 19, 2576.
Cuan-Urquizo, E., E. Barocio, V. Tejada-Ortigoza, R.B. Pipes, C.A. Rodriguez, and A. Roman-Flores, “Characterization of the mechanical properties of FFF-structures and materials: a review on the experimental, computational and theoretical approaches”, 2019, Materials, 12 (6), 895.

Conferences

Pinilla-Bedoya J.A., E. Cuan-Urquizo, J. Corona-Costuera, and J.M. Alvarado-Orozco, “fabrication of IN718 based cellular structures through laser assisted powder bed”, XXVIII International Materials Research Congress, Cancun, Mexico. August 18-23, 2019.
Alvarez-Trejo, A., J.M. Alvarado-Orozco, and E. Cuan-Urquizo, “effect of geometric parameters on the elastic properties of 3D cellular materials”, XXVIII International Materials Research Congress, Cancun, Mexico. August 18-23, 2019.
Quevedo-Moreno, D.A., A. Roman-Flores, E. Cuan-Urquizo, M.D. Moya-Bencomo, R. Cuan-Urquizo, A. Vargas-Martinez, and R.A. Ramirez-Mendoza, "Design and Analysis of the Mechanical Properties of 3D Printed Sinusoidal Structures with Auxetic Characteristics", ICAST2019, Concordia University, Montreal Canada.

2018

Journal papers

McCaw, J.C.S., and E. Cuan-Urquizo, “Curved-Layered Additive Manufacturing of Non-Planar, Parametric Lattice Structures”, 2018, Materials and Design, 160C, 249-963.
Bhaskar, A., E. Cuan-Urquizo, A Bonfanti, H. Vasilyan, T. Saghatelyan, L. Domenicale, ... & Bhatnagar, N. “Porous and lattice materials: mechanics & manufacture”, 2018, Annals of the Faculty of Engineering Hunedoara, 16(2), 107-112.
Cuan-Urquizo, E., and A. Bhaskar, “Flexural elasticity of woodpile lattice beams”, 2018, European Journal of Mechanics /A Solids, 67, 187-199

Conferences

Garcia, A., E. Cuan-Urquizo, A., Roman-Flores and E. Vazquez, “Tool path generation for sculptured surfaces with 4-axis machining”, 5th International Conference on Mechanical, Materials and Manufacturing, Orlando, OR, United States, October 13-15, 2018.
Alvarez-Trejo, A., A. Juarez-Lopez, D. Zeller-Villanueva, A. Roman-Flores, and E. Cuan-Urquizo, E., “Effect of shear modulus in the transverse deflection of 2D lattice beams”, XXIV Congreso Internacional Anual de la SOMIM, Campeche México, September 19-21, 2018.

Publications of former members

Articles

Mamá en la ciencia: la inspiración para el éxito. Matilda y las mujeres en ingeniería en América Latina, 123 by Uribe, E., & Treviño-Quintanilla, C.D. (2019)..

Journal papers

Burelo, M., Gutiérrez, S., Treviño-Quintanilla, C.D., Cruz-Morales, J.A., Martínez, A., and López-Morales, S. Synthesis of Biobased Hydroxyl-Terminated Oligomers by Metathesis Degradation of Industrial Rubbers SBS and PB: Tailor-Made Unsaturated Diols and Polyols. 2022. Polymers, 14(22), 4973.
Valle, R., Pincheira, G., Tuninetti, V., Garrido, C., Treviño, C., and Morales, J. Evaluation of the Orthotropic Behavior in AN Auxetic Structure Based on a Novel Design Parameter of a Square Cell with Re-Entrant Struts. 2022. Polymers, 14(20), 4325.
Ibarra-Garza, C.M., C.D. Treviño-Quintanilla, and J. Bonilla-Ríos. Estimation of the Effects of CO2 and Temperature on the Swelling of PS-CO2 Mixtures at Supercritical Conditions on Rheological Testing. 2022, Polymers, 14 (17), 3490.
Valle, R.; Pincheira, G.; Tuninetti, V.; Fernandez, E.; Uribe-Lam, E. Design and Characterization of Asymmetric Cell Structure of Auxetic Material for Predictable Directional Mechanical Response. Materials 2022, 15, 1841.
Burelo, M,. Hernández-Varela, J.D., Medina, D.I., & Treviño-Quintanilla, C. D. "Recent developments in bio-based polyethylene: Degradation studies, waste management and recycling". 2023. Heliyon, 9 (11), e21374.
Rocha-Cuervo, J. J., Uribe-Lam, E., Treviño-Quintanilla, C. D., & Melo-Maximo, D. V. (2023). Sputtering Plasma Effect on Zinc Oxide Thin Films Produced on Photopolymer Substrates. Polymers, 15(10), 2283.
Burelo, M., Martínez, A., Hernández-Varela, J. D., Stringer, T., Ramírez-Melgarejo, M., Yau, A. Y., ... & Treviño-Quintanilla, C. D. (2024). Recent Developments in Synthesis, Properties, Applications and Recycling of Bio-Based Elastomers. Molecules, 29(2), 387.

Conferences

Gamiz-Conde, A., Treviño-Quintanilla, C.D., Burelo, M., Franco-Urquiza, E.A. (2023). Desarrollo de compuestos poliméricos bio-basados y biodegradables utilizando PLA y residuos agroindustriales. 4° Congreso Internacional de Química, Sustentabilidad Energética y Ambiental "Dr. Mario Molina Henríquez". Cunduacán, Tabasco
Gamiz-Conde, A., Treviño-Quintanilla, C.D., Burelo, M., Franco-Urquiza, E.A. (2023). Development of Bio-based Polymer Composites using PLA and Agro-industrial Residues as Poster. S8, Hybrid Polymers, Processing (Nano)Composites (HPN) Symposium at the 18th Pacific Polymer Conference. Puerto Vallarta, Mexico.
Manuel Burelo, Cecilia D. Treviño-Quintanilla, Alice Y. Yau (2023). Synthesis of Polyesters and Polyols by Metathesis Degradation of Butadiene Rubber. S6, Polyolefins (P) Symposium at the 18th Pacific Polymer Conference. Puerto Vallarta, Mexico
Vega-Leal, C. (2023). Desarrollo y caracterización de compuesto a base de ABS reforzado con fibra de carbono reciclada. 4° Congreso Internacional de Química, Sustentabilidad Energética y Ambiental "Dr. Mario Molina Henríquez". Cunduacán, Tabasco.