Embedded Files
PROJECT NUMBER ONE
List of Supplies:
Sticker Copper tape
1 Popsicle Stick
A coin battery
About 5 coffee filters
Cupcake holder
1 LED
Invisible tape
Stainless Steel brush
Here you can see the first steps of coloring the coffee filters and then pouring some water on them to dye them.
The next step had us sticking the copper wiring to each side with one side completely covered and the other side having a short and long piece. We then stuck the battery in between the long and short piece of copper tape.
It was then time to stick on the LED light. It was important that we had the short stick on the LED touching the short piece of copper wiring. It we did the wrong side it would not light up.
As you can see once we got everything taped together and stuck the end that did not have the LED into the steel brush, the liht will glow. You can see that mine did glow which means I have everything touching correctly.
The final step was was bunching together the green dyed coffee filter to act as grass and then to cut sections of the pink/blue colored filters to be the petals. Then you put the green parts over the steel brush with a hole cut in. You also cut a small hole in the top coffee filters for the popsicle stick and when you stick it through you get a glowing flower pot.
THREE PART REFLECTION
flower pot audio.mp3Reflection #1
comparable project .mp3Reflection #2
parallel in learning journey .mp3Reflection #3
Something I forgot to mention in my reflection of my prpoject is that I struggled to get the filters to stay up and they ended up being a bit wider than I thought it would be.
Page updated
Google Sites
Report abuse