Embedded Files
Wooden Engineering 16-17.pdfPMI Block:
PMI Block:
Bandsaw Box Design Proposal
Bandsaw Box Design Proposal
Construction of Bandsaw Box
Construction of Bandsaw Box
The First Step's
The First Step's
The first step of making the bandsaw box was to glue on a extension of wood to increase the length of the box as shown with the line of glue on the right side of the wood.
Then I cut out a trapezoid out of the original piece of wood. This will be the shape of the box .
Construction of Drawer
Construction of Drawer
Drawer Border
Drawer Border
First, cut a 1/2" off the back of the wood. This will be glued back on later. Then, cut through the outside and cut the drawer out.
Frame
Frame
Then, glue back the part of the frame you had to cut through to get to the inside. Next, glue on the 1/2"inch of the back that was cut of in the previous step. This will be the actual box.
Drawer
Drawer
Next, cut off a 1/2" off of the front and back of the new piece. This piece will be used to make the drawer and the front and back pieces will be glued back on later.
Glueing
Glueing
Then, cut out a trapezoid shape out the piece from when the border was cut out. Next, glue the front and back to the drawer piece.
Construction of the Handle and Varnish
Construction of the Handle and Varnish
The Handle
The Handle
To make the handle, I cut out a 1x1 piece of wood using the bandsaw
Drawer with Varnish
Drawer with Varnish
Next I brushed some wood Varnish on the drawer to make the wood look darker.
Box with Varnish
Box with Varnish
Then I repeated the previous step with the outside of the box.
Final Result and Testing
Final Result and Testing
Final Result of the Box
Final Result of the Box
The finished and final design.
IMG_4931.MOVTesting Video
Testing Video
Video of the Bandsaw box opening and closing fluently.
Page updated
Google Sites
Report abuse