Embedded Files
PROJECT OVERVIEW
PROJECT OVERVIEW
BUILDING 7 BOBS = BRETON (BAY) OBSERVATION BOXES THAT WILL SEND DATA VIA CELLULAR LINK TO “THE CLOUD” EVERY 10 MINUTES. DATA WILL BE DISPLAYED ON A PUBLIC-ACCESSIBLE WEBSITE.
BUILDING 7 BOBS = BRETON (BAY) OBSERVATION BOXES THAT WILL SEND DATA VIA CELLULAR LINK TO “THE CLOUD” EVERY 10 MINUTES. DATA WILL BE DISPLAYED ON A PUBLIC-ACCESSIBLE WEBSITE.
ForrestTech EngClass 2023-02-15.pdfWORKING ON SOLDERING THE TCS34725 (LIGHT SENSOR)
WORKING ON SOLDERING THE TCS34725 (LIGHT SENSOR)
Soldering The Pins
Soldering The Pins
Turbidity monitoring wKduino 2023-11-20.pptxKduino Lesson #2 2-13-24.pptxTesting the Sensors
Testing the Sensors
Construction of the Turbidity Sensors
Construction of the Turbidity Sensors
BOB - KdUINO Lesson #3 3-21-24.pptx
Mapping Out
Mapping Out
The first thing needed to do, was identify all of the parts and map out the distances on the paper.
Cutting the Pipe
Cutting the Pipe
Next, I marked the pipe with it's correct length and cut the pipe using a pipe cutter.
Adding Primer and Glue
Adding Primer and Glue
Then, you add a coat of primer(purple) and a coat of glue to stick the pipe into the conduit.
Pipe with Primer and Glue
Pipe with Primer and Glue
Here's what the pipe looks like after adding primer and glue.
Final Product
Final Product
Finally, you will get this as your final result after assembling each piece.
Page updated
Google Sites
Report abuse