Embedded Files
Subsystems:
Subsystems:
Pictures of each individual piece and what they do
Pictures of each individual piece and what they do
Coin Sorting Ramp with Walls
Coin Sorting Ramp with Walls
The is designed on a slope so gravity will help bring the coins down to their designated slots. The coin slots are at exact diameter of each coin in order of right to left Dime, Penny, Nickel, and Quarter. The walls keep the coins going straight to their slots and to avoid the coins from missing off to the side.
Coin Ramps and Dividers
Coin Ramps and Dividers
The ramps allow the coins to drop from their slots and slide of the ramp to a accessible location where you can collect the coins. The dividers divide the different coins from each other.
Coin Labels
Coin Labels
Labels show which coin goes in what section of the dividers.
Motor System
Motor System
The off balanced Nut causes a vibration that helps the coins get down the ramp to their coin slots.
AutoCAD:
AutoCAD:
AutoCAD was used to make precise cuts of the coin slots
AutoCAD was used to make precise cuts of the coin slots
Coin Ramp in AutoCAD
Coin Ramp in AutoCAD
Each coin had their precise measurement in millimeters.
Data Book Entries:
Data Book Entries:
Data Entries include Design, Daily Logs, Testing Results, and Redesign.
Data Entries include Design, Daily Logs, Testing Results, and Redesign.
External Design
Internal Design
Daily Logs
Testing Results and Redesign
Testing Videos
Testing Videos
IMG_4444.MOVDime
IMG_4446.MOVPenny
IMG_4448.MOVNickel
IMG_4450.MOVQuarter
Final Test
Final Test
I had to shake my Coin Sorter due to motor breaking during testing
I had to shake my Coin Sorter due to motor breaking during testing
IMG_4424.MOVResults
Results
My coin sorter sorted 4 of each US coins in 50 seconds with 93% accuracy.
Page updated
Google Sites
Report abuse