Steps to Repairing a Drinking Fountain with Replacement Parts

Drinking fountains are essential in any public place, providing a convenient and hygienic way for people to quench their thirst. However, like any other mechanical device, drinking fountains can wear out over time and require replacement parts. In this article, we will guide you through replacing drinking fountain repair parts step-by-step.

 

Step 1: Identify the Problem

 

Before replacing any parts, you must identify your drinking fountain's problem. Common issues include low water pressure, a broken bubbler or valve, and leaks. Once you know what's wrong with your drinking fountain, you can start looking for replacement parts.

 

Step 2: Find the Right drinking Repair Parts

 

When it comes to replacing parts for your Halsey Taylor Oasis drinking fountain, finding the right replacement parts is essential. You can search for replacement parts online or contact the manufacturer directly to get the right parts. Ensure you have your drinking fountain's model and serial number to get the right parts.

 

Step 3: Turn Off the Water Supply

 

Before replacing any parts, you must turn off the drinking fountain's water supply. Look for the shutoff valve located on the supply line and turn it off. If you can't find the shutoff valve, you may need to turn off the water supply to the building.

 

Step 4: Remove the Old Parts

 

Once the water supply is turned off, you can remove the old parts. Depending on the part you are replacing, you may need a wrench or pliers to remove it. Ensure you are careful when removing parts to avoid damaging the drinking fountain.

 

Step 5: Install the New Parts

 

After you have removed the old parts, it's time to install the new parts. Read the manufacturer's instructions carefully before installing the new parts. Depending on the part you are replacing, you may need a wrench or pliers to install it. Ensure you don't over-tighten any bolts or nuts, as this can cause damage to the Halsey Taylor Oasis drinking fountain.

 

Step 6: Test the Drinking Fountain

 

After you have installed the new parts, it's time to test the drinking fountain. You can turn on the water supply and check for any leaks or other issues if occurs. If everything looks good, test the drinking fountain to ensure it works correctly.

 

Step 7: Clean and Sanitize the Drinking Fountain

 

Once you have confirmed that the drinking fountain is working correctly, it's time to clean and sanitize it. Use mild detergent and warm water to clean the exterior of the drinking fountain, paying particular attention to the bubbler and other areas where people come into contact with the fountain. Make sure you rinse the drinking fountain thoroughly to remove any soap residue.

 

Step 8: Reconnect the Water Supply

 

Finally, once you have cleaned and sanitized the drinking fountain, it's time to reconnect the water supply. Turn the water supply back on slowly to avoid any water hammer. Test the Halsey Taylor Oasis drinking fountain once again to ensure that it's working correctly.

 

Final Thoughts

 

Replacing drinking fountain repair parts may seem like a daunting task, but with the right tools and instructions, it's a task that you can easily accomplish. Make sure you follow the steps outlined above carefully and take the time to clean and sanitize the drinking fountain thoroughly. With the right maintenance and care, your drinking fountain will continue to provide a safe and convenient way for people to stay hydrated for years.