Embedded Files
Final Design Proposal
Untitled document.pdfThis is my Design proposal, having the old, and the newly revised version included. With my bandsaw proposal I did not have to change a lot of steps only a few when things got a little more difficult but over all my finish design is accurate to what I did.
The Process of Making The Bandsaw
After finding wood, I had to glue it all together with a thin layer of wood glue.
After clamping my wood together, I wiped away the access and let it dry for 24 hours.
After my wood dried I cut out an outline, then went and cut out the cavity which you see here, this is after sanding and gluing the space back together.
After I cut the out drawer I cut out the next cavity for box ad glued the drawer back together.
Final Product
This is what the end result of my box looks like, I did not put finish on it as i liked the look of it bar.
Page updated
Google Sites
Report abuse