Embedded Files
SOLIDWORKS is used by millions of designers and engineers at hundreds of thousands of companies. It’s one of the most popular design and engineering software on the market. Known for its range of features and high functionality, SOLIDWORKS is used across multiple professions and industries around the world. SOLIDWORKS uses parametric design, which is why it’s such an effective tool for designers and engineers. This means that the designer can see how changes will affect its neighboring components, or even the overall solution. For example, if the size of a single component is increased, this would affect the joint or hole it’s attached to. This allows designers to spot and correct issues quickly and easily
Introduction to SolidWorks
This is the introduction to solid works. We followed a step by step guide to make a pressure plate, as shown below.
SolidWorks Tutorials 1, 2, and 3
These are the box base and lid before they were conjoined together.
These pictures are of the second tutorial after putting the bottom and the top of the box together.
Puzzle Cube Challenge
Puzzle Cube Challenge
The Puzzle cube Challenge, was a challenge to make 7 pieces in SolidWorks using measurements we took from printed cube pieces, then assemble the new cube pieces into an assembly in SolidWorks, into a Cube. The images below are of the 7 different pieces of the Cube that I made, along with a Gif of the assembled cube using the 7 pieces.
Solid works advanced tutorials
Solid works advanced tutorials
Fillets
Fillets
These are pictures of the fillets made following the fillet tutorial in Solid works.
The image on the left is the fillet made following the tutorial, and the image on the right was made using what I learned from the tutorial.
Pattern Features
Pattern Features
The images below are all made using the Pattern featurs Tutorial to some degree. The first image was the design made by following the tutorial and the second and third images are a personal desgin made using the things I've learned from the tutorial.
Lofts
Lofts
The following images to the right and below are of the personal version of the loft tutorial.
The image to the left is the desgin made by following the tutorial.
Revolves and sweeps
Revolves and sweeps
The images to the right are of the personal design I made using what I learned from the Revolves and sweeps tutorial.
The image below is the design made by following the tutorial.
Mouse Gestures
Mouse Gestures
The 2 pictures here are designs made by following the Mouse gestures tutorial on solid works and using what I learned with it.
The image to the left is the design made by following the tutorial, and the image to the right was a design challenge made by using the mouse gesture feature
Page updated
Google Sites
Report abuse