Embedded Files
CO2 Laser Engraver/Cutter
CO2 Laser Engraver/Cutter
CO2 CNC Lasers work by bouncing light emissions back and forth between mirrors on an XYZ axis until the beam passes through a special lens at the tip of the router head. Types of cutting material can range from thin plywood, acrylic and cardboard.
CO2 CNC Lasers work by bouncing light emissions back and forth between mirrors on an XYZ axis until the beam passes through a special lens at the tip of the router head. Types of cutting material can range from thin plywood, acrylic and cardboard.
First Engravings/Cuts
First Engravings/Cuts
This is a picture of the design I chose to make using the Laser engraver/cutter, the program used to convert the images into readable code for the laser is called RDWorks.
This is the image that was used to make the Laser engraving, it is an emblem for Bay District Volunteers Fire Department Station 3, "Ghetto Boyz" is Station 3's nickname.
This is a time laps of the Laser doing the engraving/cutting.
The image to the right is what is being scanned and cut from acrylic, it is the emblems for navy squadrons VF-32 and VFA-14
This is a time laps of the to images being cut out and engraved into acrylic.
Second Engraving/Cut
Second Engraving/Cut
The image to the right is what is being scanned and cut from the acrylic. the red indates cuts and the blue indicatse scans
Card board Box
Card board Box
Page updated
Google Sites
Report abuse