How to setup canon mg3600 printer

Looking for a method on how to configure Canon MG3620? So this is the best guide to follow as it goes through the Canon MG3620 setup using a Bluetooth connection, USB connection, WPS PIN code, and LAN connection. Follow the guide and set up your Canon printer with a snap of your fingers.

The Canon MG3620 printer allows you to connect the device through a Wi-Fi network. Share this printer with everyone in your home or office without the need for cables. Canon mg3620 wireless setup is easy. Proceed to the next procedure to configure your printer wirelessly and learn how to connect the canon mg3620 printer to Wi-Fi.

Canon Pixma MG3620 Setup is a compact wireless inkjet printer. You can configure the Canon Pixma MG 3620 to wirelessly print documents from an Apple or Android device with a high resolution of 4800 * 1200 dpi. To learn how to configure this Pixma device, you can follow the guidelines given in the next topic.

Canon Pixma MG3620 unboxing setup

These are the set up guidelines for the Canon MG3620 printer.

Open the cardboard box of Canon Pixma MG3620 and take out the small cardboard box.

The cardboard box inside the box contains the Canon Pixma power cord, the PG240 black, and the CLI 241 tri-color ink cartridges. Set these components aside.

The Canon Pixma device is packaged in a plastic bag that is kept inside the box. Remove the plastic bag with the Pixma printer and set the Styrofoam blocks aside for recycling.

Carefully remove the Canon Pixma MG3620 device from the plastic bag and place it on a stable platform.

You will find many tapes stuck on the surface of the Canon Pixma device. These tapes do not leave any residue when peeled off. So, remove them one after the other and make sure to remove them all.

Take the Canon Pixma power cord out of the small cardboard box and unroll. Connect it to the rear power port of the Canon Pixma device and to the electrical outlet.

Make sure to connect the Pixma power cord directly to the printer. If the Canon Pixma device is connected to the power supply via a power strip, remove it from there and make a direct power connection.

Lower the front cover of the Canon Pixma MG3620 printer and remove the tapes stuck to the internal surfaces. The Canon Pixma print cartridge slot is located on the right side. Lower the print cartridge access door.

Take the Canon Pixma print cartridges out of their packaging. Peel off the tapes that cover your electrical contacts. Push down on the print cartridge latches, install the Canon print cartridges, and push the ink cartridge latches up again. Now, close the front cover and the ink cartridge access door.

This completes the unpacking and setup of the Canon Pixma MG3620.

Canon Pixma MG3620 wireless setup without router

• To configure your Canon Pixma MG3620 printer wirelessly without using the router, follow the instructions provided below.

• First, you need to enable the wireless direct option on your printer, then connect the device to the printer and try a test print.

• Make sure the Canon Pixma MG3620 printer is turned on.

• Touch and hold the Wi-Fi button on the printer's control panel.

• Release the Wi-Fi button once the wireless light begins to blink.

• Press the black button followed by the Wi-Fi button.

• Continue pressing the Wi-Fi button until the Direct light begins to blink.

• Once the direct light begins to blink, press the Color or Black button.

• Now connect your system to the wireless network.

• Choose your Canon Pixma MG3620 printer from the list of installed devices.

• Enter the password in the required field. Click on the OK button.

• Now the Canon Pixma MG3620 setup and the computer are connected to the wireless network successfully.

• Make sure the Canon Pixma MG3620 print driver is installed on your computer and try a test print to verify the performance of the printer.

Conclusion

These are some simple guidelines that can help you with How to connect MG3620 to WiFi on Windows and Mac devices. Once your device is connected to the wireless network, you are ready to print documents wirelessly without any hassle. Just be sure to follow the steps carefully to avoid complexities. However, if you are still unable to canon mg3600 setup your printer, or if you have any other questions about the setup process, please contact the expert team. Printer experts can give you the best advice to complete the setup and ensure you have the desired Canon document printing experience.