White Industries

White Industries  

https://www.whiteind.com

White Industries R30 Cranks

$366.40

https://www.whiteind.com/product/r30-cranks

The R30 is part of our 30mm spindle line of cranks which also includes the M30, A30 and G30 models. The “R” stands for road and the “30” is for the 30mm spindle.  This is the crank you want for most road and gravel builds where a road chainline is needed and you want (and the frame can accommodate) a lower Q factor than the G30 cranks provide.  Check out the table below and compare the specs of all four crank combinations to help decide which model would best suit your needs.

Note: Spindle, crank bolts, extractors, adjusting collar, and chairing lockring included.  Chainrings and bottom bracket sold separately.

Features

• Available in black anodize or polished silver

• Extractor caps available in:

  • Anodized aluminum (black, blue, gold, pink, purple, red, and silver/clear)

  • Polished bronze

• Lengths available:

  • 165mm, 170mm, 172.5mm, 175mm, and 180mm

• Compatible White Industries chainrings:

  • TSR 1X/singlespeed

    • Compatible with 8/9/10/11/12 and 12 flat-top chains

      • Shimano 12 speed chains must use a SRAM Eagle 12-speed PowerLock connector

  • TSR Boost 1X/singlespeed

    • Compatible with 8/9/10/11/12 and 12 flat-top chains

      • Shimano 12 speed chains must use a SRAM Eagle 12-speed PowerLock connector

  • VBC 2X

    • Compatible with 9/10/11 speed chains and derailleurs (12 speed are too narrow)

      • Campy and SRAM derailleurs not recommended

      • Shimano road derailleurs are best with these rings on this crank

        • 11 speed Di2

        • 9/10/11 speed 105/Ultegra/Dura Ace/GRX

• Also compatible with Wolf Tooth “CAMO Direct Mount Spider For White Industries”

• 5 different White Industries 30mm bottom bracket options

• All 30mm cranks and spindles are made from U.S. sourced 2024-T365 aluminum

Specs

• Designed around a 91mm OBW (Outer Bearing Width)

  • This is the allowable outside-to-outside measurement of your BB bearings (with seals) when they are mounted to your frame.  The bearing preload collar on the crank is adjustable and can accommodate slightly wider or narrower widths (+/- 1mm) than the target number.

• Designed to fit 68mm or 86mm bottom bracket shells

• See “MARG30 Crank and Bottom Bracket Compatibility Chart” document below for BB/spacer info

• Weight: 570g (175mm length w/spindle)

• Q factor: 158.5mm [vs 171mm on G30 crankset] [vs 151 on Shimano GRX]

• Chainlines:

1x standard TSR ring (3mm offset, facing inward)  46.5mm

1x Boost TSR ring (0mm offset/flat)   49.5mm

• • versus Shimano GRX: 49.7

White Industries G30 Cranks

https://www.whiteind.com/product/g30-cranks

Weight: 570g (175mm length w/spindle)

$345.65

171mm

Compatible White Industries chainrings:

• TSR 1X/singlespeed

  • Compatible with 8/9/10/11/12 and 12 flat-top chains

  • Shimano 12 speed chains must use a SRAM Eagle 12-speed PowerLock connector: https://www.sram.com/en/sram/models/cn-plck-12s-a1 

  • Chainline: 46.5mm (versus Shimano GRX: 49.7)

https://www.wolftoothcomponents.com/collections/chainrings/products/110-bcd-asymmetric-4-bolt-for-shimano-grx-cranks?variant=40113216225315

https://www.garbaruk.com/chainrings/round-road-cx-gravel.html  

White Industries G30 ($345.65)

https://www.whiteind.com/product/g30-cranks/

The G30 is part of our 30mm spindle line of cranks. The “G” stands for gravel and the “30” is for the 30mm spindle.   can be the perfect solution when more crankarm-to-chainstay clearance is needed, while keeping the road chainline of the R30 crank.  Note: Spindle, crank bolts, extractors, adjusting collar, and chairing lockring included.  Chainrings and bottom bracket sold separately.

Features

• Available in black anodize or polished silver

• Extractor caps available in:

  • Anodized aluminum (black, blue, gold, pink, purple, red, and silver/clear)

  • Polished bronze

• Lengths available:

  • 165mm, 170mm, 172.5mm, 175mm, and 180mm

• Compatible White Industries chainrings:

  • TSR 1X/singlespeed

    • Compatible with 8/9/10/11/12 and 12 flat-top chains

      • Shimano 12 speed chains must use a SRAM Eagle 12-speed PowerLock connector

  • TSR Boost 1X/singlespeed

    • Compatible with 8/9/10/11/12 and 12 flat-top chains

      • Shimano 12 speed chains must use a SRAM Eagle 12-speed PowerLock connector

• 5 different White Industries 30mm bottom bracket optionsSpecs

• Designed around a 91mm OBW (Outer Bearing Width)

  • This is the allowable outside-to-outside measurement of your BB bearings (with seals) when they are mounted to your frame.  The bearing preload collar on the crank is adjustable and can accommodate slightly wider or narrower widths (+/- 1mm) than the target number.

• Designed to fit 68mm or 86mm bottom bracket shells

• See “MARG30 Crank and Bottom Bracket Compatibility Chart” document below for BB/spacer info

• Weight: 570g (175mm length w/spindle)

• Q factor: 171mm

• Chainlines: