Ordine cronologico (155)

1. Sul calcolo a rottura delle travi continue in presenza di carichi variabili, Atti VII CTA, Torino, ottobre 1979, “Ricerca teorica e sperimentale”, 33-50 (C. Gavarini). (in italian) 1

2. Analisi limite di telai piani in acciaio - Parte I: meccanismo e moltiplicatore di collasso al 1° ordine, Pubbl. II-313 ISC, Roma, 1980 (P. D’Asdia). (in italian) 2

3. A linear programming method of deflection analysis at plastic collapse in elastic-perfectly plastic frame structures, Arch. Inz. Lad., 27(3), 1981, 437-450. 3

4. Analisi limite di telai piani in acciaio - Parte II: deformazioni e spostamenti di collasso incipiente al 1° ordine, Pubbl. II-343 ISC, Euromech Colloqium 140, Udine 6-9 May 1981 (P. D’Asdia). (in italian) 4

5. Plastic behaviour of structures under variable loads, Pubbl. II-356 ISC, Euromech Colloqium 140, Udine 6-9 May 1981 (A. Cinuzzi, C. Gavarini, P. Nedli). 5

6. Deflection of elastic-plastic frames at finite spread of yielding zones, Comput. Meths. Appl. Mech. Engng., 39(1), 1983, 21-36 (A. Sawczuk). 6

7. Sull’analisi limite elasto-plastica dei telai piani in acciaio, Atti VIII CTA, Palermo, ottobre 1981, “Ricerca teo­rica e sperimentale”, 21-32 (P. D’Asdia). (in italian) 7

8. Un modello per la rappresentazione di strutture dotate di vincoli interni non perfettamente bilaterali, Atti VI AIMeTA, Genova, 7-9 ottobre 1982, Sez. V, 302-311 (G. Ceradini, P. D’Asdia). (in italian) 8

9. On compact matrix description of rigid-perfectly plastic skeletal structures, Arch. Inz. Lad., 29(1-2), 1983, 5-15 (A. Borkowski). 9

10. Incremental analysis of elastic-plastic frames at finite spread of yielding zones, Engng. Fract. Mech., 21(4), 1985, 827-839 (P. D’Asdia). 10

11. A simple model for the dynamic analysis of deteriorating structures, Proc. 7th SMiRT, Chicago 1983, L, 591-598 (G. Ceradini, P. D’Asdia). 11

12. Analysis of elastic-plastic frames at large displacement range accounting for finite spread of yielding zones, Proc. of the Michael R. Horne Conf., IPCSS 83, “Instability and Plastic Collapse of Steel Structures“, Manchester, September 20-22,  1983, 113-121 (P. D’Asdia). 12

13. Displacement analysis in elastic-plastic frames at plastic collapse, Comput. Meths. Appl. Mech. Engng., 42(1), 1984, 19-35 (P. D’Asdia). 13

14. Una proposta di modellazione dei legami costitutivi e dei domini di rottura delle murature, Atti II ASSIRCCO, Ferrara, 30 maggio-2 giugno 1984, 259-270 (G. Ceradini, P. D’Asdia, F. Iannozzi). (in italian) 14

15. Una proposta di modellazione del comportamento delle murature soggette ad azioni cicliche, Atti II ASSIRCCO, Ferrara, 30 maggio-2 giugno 1984, 271-276 (G. Ceradini, P. D’Asdia, F. Iannozzi). (in italian) 15

16. On the optimal choice of the shape of antiseismic bracing systems, Proc. 8th WCEE, San Francisco, July 21-28, 1984, V, 459-466 (P. D’Asdia, F. Iannozzi). 16

17. Yield surfaces of steel cross-sections via Linear Programming, Pubbl. II-518 ISC, 1984 (P. D’Asdia). 17

18. Masonry columns under horizontal loads: a comparison between finite element modelling and ex­peri­mental results, Proc. 7IBMaC, 7th Int. Brick/Block Masonry Conf., Melbourne 1985, I, 469-478 (G. Ceradini, M. Cerone, P. D’Asdia). 18

19. A finite element model for the analysis of masonry structures under cyclic actions, Proc. 7IBMaC, 7th Int. Brick/Block Masonry Conf., Melbourne 1985, I, 479-488 (M. Cerone, P. D’Asdia, F. Iannozzi). 19

20. Inelastic response spectra of simple degrading systems, Proc. 8th SMiRT, Brussels, August 19-23, 1985, K(a), 415-420 (G. Ceradini, P. D’Asdia, P. Gaudenzi). Scopus: eid=2-s2.0-0022240261 20

21. Un modello di elemento finito per l’analisi delle murature, Atti “Stato dell’arte in Italia sulla mec­canica delle murature”, Roma, 14-15 ottobre 1985, 203-235 (P. D’Asdia). (in italian) 21

22. Aspetti dell’interazione fra muratura ed elementi metallici di rinforzo, Atti “Stato dell’arte in Italia sulla meccanica delle murature”, Roma, 14-15 ottobre 1985, 237-267 (P. D’Asdia, A. Di Paolo). (in italian) 22

23. Analisi degli effetti di cedimenti di fondazione sulla resistenza alle forze orizzontali di pareti in muratura, Atti “Stato dell’arte in Italia sulla meccanica delle murature”, Roma, 14-15 ottobre 1985, pagg. 269-297 (M. Cerone, P. D’Asdia). (in italian) 23

24. Damage modelling and seismic response of simple degrading systems, Res Mech., 22(1), 1987, 79-100 (G. Ceradini, P. D’Asdia, P. Gaudenzi). Senza DOI. Scopus eid=2-s2.0-0023177373, WOS: A1987J540800005 24

25. Analisi critica dei modelli per lo studio dinamico dei sistemi di conci a secco, Atti III ANIDIS, Roma, 30 settembre-2 ottobre 1987, I, 649-663 (A. Di Paolo). (in italian) 25

26. Sul comportamento dei giunti tra conci lapidei: un modello di giunto attritivo, Atti ANIDIS, Roma, 30 settembre-2 ottobre 1987, I, 665-690 (P. D’Asdia, A. Di Paolo). (in italian) 26

27. An incremental procedure for deformation analysis of elastic-plastic frames, Int. J. Numer. Methods. Eng., 26(4), 1988, 769-784 (P. D’Asdia). 27

28. A 3-D finite element model for the analysis of masonry structures, Proc. 8IBMaC, 8th Int. Brick/Block Masonry Conf., Dublin, September 19-21, 1988, 3, 1405-1416. 28

29. 3-D analysis of masonry columns with grouted reinforcement bars, Proc. 8IBMaC, 8th Int. Brick/Block Masonry Conf., Dublin, September 19-21, 1988, 3, 1507-1518 (A. di Paolo). 29

30. Mechanical behaviour of block-work structures: a brief review of experimental results and phenomenolo­gical aspects, “Omaggio a Giulio Ceradini”, 1988, 37-48. Mechanical behaviour of block-work structures: a brief review of experimental results and phenomenolo­gical aspects, “Omaggio a Giulio Ceradini”, 1988, 37-48. 30

31. Modelling of cyclic behaviour of steel braces, Res Mech., 26(3), 1989, 267-288 (P. Gaudenzi). 31

32. A frictional model for sliding of jointed blocks, Proc. ICCLEM (Asia), Chongqing, Cina, August 1-13, 1989, I, 249-254. 32

33. Analisi dinamica di blocchi lapidei su base attritiva, Atti 4º ANIDIS, Milano, 4-6 ottobre 1989, 2, 686-695. (in italian) 33

34. Dynamic analysis of deformable block-work structures, Proc. 9th ECEE, Moscow, September 11-16 1990, 7-C, 61-70. 34

35. Metodi di modellazione e di analisi nella meccanica delle strutture a blocchi lapidei, Studi e Ricerche (2), 1989, 1-77 (G. Augusti). (in italian) 35

36. Sliding-uplifting response of rigid blocks to base excitation, Earthq. Eng.& Struct. Dyn., 19( 8), 1990, 1181-1196. 36

37. Meccanica delle colonne e delle costruzioni a blocchi lapidei: stato e prospettive degli studi, PACT, 32(7), 1991, 67-126 (G. Augusti). (in italian) 37

38. Stato dell’arte sui legami costitutivi dei solidi murari, Studi e Ricerche (2), 1991, 1-75 (M. Maroder). 38

39. Stato dell’arte sui metodi di modellazione e di analisi statica dei solidi murari, Studi e Ricerche (3), 1991, 1-58 (A. Fatello). 39

40. Collasso di pannelli murari soggetti a stati piani di tensione, Costruire in Laterizio (22), 1991, 315-321 (G. Ceradini). (in italian) 40

41. Failure modes of solid brick masonry under in-plane loading, Mas. Int., 6(1), 1992, 4-8 (G. Ceradini). 41

42. Numerical modelling of unreinforced masonry building, Proc. Italian Seminar on Numerical Modelling of URM Buildings, CNR-GNDT, Pavia, June 22th, 1994, pp. 6.1-6.13 (C. Gavarini et al.). 42

43. A two-storey masonry wall under cyclic loading: a comparison between experimental and numerical re­sults, Proc. CMSM 95, 3rd Int. Symp. on “Computer Methods in Structural Masonry”, Vol. unico, Lisbona 19-21 aprile 1995, 68-77 (L. Ippoliti). 43

44. Masonry panels under in-plane loading: a comparison between experimental and numerical results, Proc. CMEM 95, 7th Int. Conf. on “Computational Methods and Experimental Measurements”, Vol. unico, Capri, 16-18th May 1995, 603-610 ( L. Ippoliti). 44

45. A two-storey masonry wall under monotonic loading: a comparison between experimental and numerical results, Proc. STREMA 95, 4th Int. Conf. on Structural Repairs and Maintenance of Historical Buildings), Vol. 1, Creta, 22-24th May 1995, 319-326 (L. Ippoliti). 45

46. A two-storey masonry wall under seismic loading: a comparison between simple and strengthened ma­sonry, Proc. ERES 96, 1st Int. Conf. on “Earthquake Resistant Engineering Structures”, Vol. 2, Thessaloniki, October 30 – November 1 1996, 561-570 (L. Ippoliti) [554.L]. 46

47. Failure criteria for masonry panels under in-plane loading, J. Struct. Div., ASCE, 122(1), 1996, 37-46, DOI: 10.1061/(ASCE)0733-9445(1996)122:1(37). 47

48. On thermokinematic analysis of pipe shaping in cast ingots: a numerical simulation via FDM, Int. J. of Eng. Sci., 34(12), 1996, 1349-1367 (F. dell’Isola). 48

49. An analytical-numerical model for contact-impact problems: theory and implementation in a two-dimen­sional distinct element algorithm, Comput Mod. & Sim. in Eng., 3(2), 1998, 98-110 (N. Nisticò). Computer  Modeling and Simulation in Engineering 49

50. A review of the problem of the shear centre(s), Cont. Mechs. & Thermodyn., 10(6), 1998, 369-380 (G. Ruta). DOI: 10.1007/s001610050100, Scopus: eid=2-s2.0-0032262569, ISI: WOS:000077854000005 50

51. Rocking-sliding of a rigid block: friction influence on free motion, Engng. Trans., 46(2), 1998, 143-164 (P. Casini). 51

52. On the rocking-uplifting motion of a rigid block in free and forced motion: influence of sliding and boun­cing, Acta Mech., 138, 1-23, 1999 (P. Casini). 52

53. Stone arch bridges under in-plane loading: discrete element modelling and incremental analysis up to failure, Proc. STREMAH 99, 6th Int. Conf. on “Structural Studies, Repairs and Maintenance of Historical Buildings”, Vol. unico, Dresden 22-24 June 1999, 129-138 (L. Ippoliti). 53

54. Torsion of Saint-Venant Cylinders with a Non-Simply Connected Cross Section, Engng. Trans., 47(1), 1999, 77-91, (T. Jablonski). 54

55. An incremental finite element procedure for cumulative damage of 2-D continua via two surface plasti­city, Comput Mod. & Sim. in Eng., 4(2), 1999, pp. 143-149 (S. Vidoli). Computer  Modeling and Simulation in Engineering, ISSN 1083-3455. 55

56. Dynamics of three rigid block assemblies with unilateral deformable contacts. Part 1: Contact modelling, Earthq. Eng. & Struct. Dyn., 28(12), 1999, 1621-1636 (P. Casini). 56

57. Dynamics of three rigid block assemblies with unilateral deformable contacts. Part 2: Sample applica­tion, Earthq. Eng. & Struct. Dyn., 28(12), 1999, 1637-1649 (P. Casini). 57

58. Dynamics of SDOF oscillators with hysteretic motion-limiting stop, J. of Nonlin. Dyn., 22, pp. 155-174, 2000 (P. Casini). DOI: 10.1023/A:1008354220584, Scopus: eid=2-s2.0-0033716334,
    WOS: 000087601000002 58

59. Dynamics of friction oscillators excited by moving base or/and driving force, J. of Sound & Vib., 245(4), pp. 685-699, 2001 (P. Casini). DOI: 10.1006/jsvi.2000.3555, Scopus: eid=2-s2.0-0035939863, WOS: 000170499800006 59

60. Forced response of a SDOF friction oscillator colliding with a hysteretic obstacle. Proceedings of DETC’01 ASME 2001 Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Pitthsburgh, Pennsylvania, September 9-12, 2001, (P. Casini), Scopus: eid=2-s2.0-0035790845 60

61. Forced motion of friction oscillators limited by a rigid or deformable obstacle, Mech. Struct. & Mach., 29(2), 177-198 (2001), (P. Casini). DOI:10.1081/SME-100104479, Scopus: eid=2-s2.0-0035327970, WOS: 000170372000002 61

62. Friction oscillator excited by moving base and colliding with a rigid or deformable obstacle, Int. J. of Nonlin. Mech., 37(1), pp. 117-133, 2002 (P. Casini). DOI: 10.1016/S0020-7462(00)00101-3, Scopus: eid=2-s2.0-0036028167 62

63. Frequency reduction in elastic beams due to a stable crack: numerical results compared with measured test   data, Engng. Trans., 51(1), pp. 87-101, 2003 (P. Casini, F. Vestroni). 63

64. A novel passive electric network analog to Kirchhoff-Love plate designed to efficiently damp forced vibrations by distributed piezoelectric tranducers Proc. SPIE, Vol. 5052, Smart Structures and Materials 2003: Damping and Isolation, pp. 380-381. Eds. Gregory S. Agnes; Kon-Well Wang, San Diego, CA. (S. Alessandroni, U. Andreaus. Fr. dell'lsola) 64

65. Dynamic response of MDOF mechanical systems with contact and friction, Recent Research Development in Structural Dynamics, 2003, pp. 299-329, Editor: Angelo Luongo, Research Signpost, Kerala, India (P. Casini). 65

66. Multimodal vibration control by using piezoelectric transducers and passive circuits, Electro-Magneto-Mechanics of Advanced Material Systems and Structures, Editor: W. Shindo, WIT Press, pp. 307-317, 2003 (F. dell’Isola, M. Porfiri). 66

67. Piezoelectric passive distributed controllers for beam flexural vibrations, Int. J. Vibration and Control, 23, pp. 625-659, 2004 (F. dell’Isola, M. Porfiri), DOI: 10.1177/1077546304038224, Scopus: 2-s2.0-2442718054, ISI: 221656400001. 67

68. Piezo-ElectroMechanical (PEM) Kirchhoff-Love plates, European J. of Mechs. A/Solids, 23, pp. 689-702, 2004 (S. Alessandroni, F. dell’Isola, M. Porfiri), DOI: 10.1016/j.euromechsol.2004.03.003, Scopus: 2-s2.0-2942606291, ISI 222593700011. 68

69. A passive electric controller for multimodal vibrations of thin plates, Comput. & Struct. 83(15-16), 1236-1250, 2005 (S. Alessandroni, F. dell’Isola, M. Porfiri), DOI: 10.1016/j.compstruc.2004.08.028, Scopus: 2-s2.0-17044422603, ISI: 229693100008. 69

70. Nonlinear features in the dynamic response of a cracked beam under harmonic forcing, Proc. of DETC’05,2005 ASME International Design Engineering Technical Conferences and  Computers and Information in Engineering Conference, Long Beach, California, USA, September 24-28, 2005 (P. Casini, F. Vestroni), Volume 6 C, pp. 2083-2089. 70

71. Vibrations of Cracked Euler-Bernoulli Beams using Meshless Local Petrov-Galerkin (MLPG) Method, Computer and Modeling in Engineering & Science (CMES), 9(2) 111-131, 2005 (R. Batra, M. Porfiri). 71

72. Analisi dello sforzo meccanico all'interfaccia osso corticale - stelo protesico della protesi d’anca mediante il Metodo degli Elementi Finiti, Giornale Italiano di Ortopedia e Traumatologia, Vol 32(5), 198-204, 2006 (M. Colloca). 72

73. Effect of Electrical Uncertainties on Resonant Piezoelectric Shunting, Intelligent Material, Systems andStructures, Vol. 18(5), 477-485, 2007 (M. Porfiri), http://dx.medra.org/10.1177/1045389X06067116. 73

74. Nonlinear Dynamics of a Cracked Cantilever Beam Under Harmonic Excitation, Int. J. of Non-Linear Mechanics, doi:10.1016/j.ijnonlinmec.2006.08.007, Vol. 42(3), April, 566-575, 2007 (P. Casini, F. Vestroni). 74

75. Mechanical behaviour of physiological and prosthesized human femurs during stair climbing: a com-
    parative analysis via 3-D numerical simulation. Minerva Ortopedica e Traumatologica, Vol. 59(4); 213-220, 2008 (M. Colloca, A. Toscano). 75

76. Mechanical behaviour of a prosthesized human femur: a comparative analysis between walking and stair climbing by using the finite element method. Biophisics and Bioengineering Letters, Vol. 1(3); 1-15, 2008 (M. Colloca, A. Toscano), ISSN: 2037-0199. 76

77. Andreaus U., Colloca M. (2009). Prediction of micromotion initiation of an implanted femur under physio logical loads and constraints using the finite element method. Procs. of the Inst. of Mechanical Engineers. Part H, J. of Engineering in Medicine, vol. 223(5); p. 589-605, ISSN: 0954-4119,
    doi: 10.1243/09544119JEIM559. 77

78. Andreaus U., Colloca M. (2009). Risk of failure at the cement-enamel junction of a human premolar tooth. In: I Int. Conf. on Biodental Engineering. Porto, 26 and 27 of June 2009, Porto, Vol. 1, pp. 83-88, WOS: 000282776500014, ISBN: 978-0-415-57394-8, CRC PRESS-TAYLOR & FRANCIS GROUP, Porto, 2010. 78

79. Andreaus U., Colloca M., Iacoviello D. (2009). Damage detection in a human premolar tooth from image processing to finite element analysis. In: I Int. Conf. on Biodental Engineering. Porto, 26 and 27 of June 2009, Porto, Vol. 1, pp. 29-34, WOS: 000282776500005, ISBN: 9780415573948 , CRC PRESS-TAYLOR & FRANCIS GROUP, Porto, 2010. 79

80. Andreaus U., Colloca M., Iacoviello D., Pignataro M. Bone remodeling and topology optimization by PID control. GACM Colloquium on Computational Mechanics, 21-23 September 2009, Minisymposium on Computational bone mechanics, Leibniz Universität Hannover, Institut für Kontinuumsmechanik. 80

81. Andreaus U., Baragatti P. (2009). Fatigue crack growth, free vibrations and breathing crack detection of Aluminium Alloy and Steel beams. J. of Strain Analysis for Engineering Design, Vol. 44(7); p. 595-608, ISSN: 0309-3247, doi: 10.1243/03093247JSA527. 81

82. Andreaus U., Placidi L., Rega G. (2010). Numerical simulation of the soft contact dynamics of an impacting bilinear oscillator. Communications in Nonlinear Science & Numerical Simulation, Vol. 15(9); p. 2603-2616, ISSN: 1007-5704, doi: 10.1016/j.cnsns.2009.10.015. 82

83. Andreaus U., Placidi L., Rega G. (2010). Dinamica di una mensola con impatti soffici: confronto del modello infinitodimensionale con quello equivalente ad un grado di libertà (sdof). In: Atti del XVIII Convegno Italiano di Meccanica Computazionale. Siracusa, 22 - 24 settembre 2010, Siracusa, Vol. 1, p. 1-10. 83

84. C. Giacomozzi, U. Andreaus, G. Notarangelo, I. Campioni. Comportamento meccanico di steli protesici femorali: analisi con il metodo degli elementi finiti a supporto delle prove meccaniche a fatica. 2010, 73 p. Rapporti ISTISAN 10/11, ISSN 1123-3117. 84

85. U. Andreaus, M. Colloca, D. Iacoviello. Coupling image processing and stress analysis for damage identification in a human premolar tooth. Comput. Methods Programs Biomed. (2010), doi:10.1016/j.cmpb.2010.06.009, Vol. 103(2), pp. 61-73, August 2011. 85

86. U. Andreaus, M. Colloca, D. Iacoviello, M. Pignataro, Optimal-tuning PID control of adaptive materials for structural efficiency, Structural and Multidisciplinary Optimization (2011) 43(1):43–59, DOI: 10.1007/s00158-010-0531-9. 86

87. Andreaus U., Baragatti P. (2011). Cracked beam identification by numerically analysing the nonlinear behaviour of the harmonically forced response. J. of Sound and Vibration, 330(4), 721-742, ISSN: 0022-460X, doi: 10.1016/j.jsv.2010.08.032. 87

88. U. Andreaus, L. Placidi and G. Rega. Soft impact dynamics of a cantilever beam: equivalent SDOF model versus infinite-dimensional system. Proc. of the Institution of Mechanical Engineers, Part C: J. of Mechanical Engineering Science 2011 225(10): 2444-2456, DOI: 10.1177/0954406211414484, Scopus: 2-s2.0-81255158500, ISI: 295686100015. 88

89. U. Andreaus, B. Chiaia, C. Cennamo, L. Placidi,  Dinamica di elementi non strutturali soggetti ad azione sismica, Atti del XIV Convegno ANIDIS “L’Ingegneria Sismica in Italia”, Bari, 18 - 22 Settembre 2011. 89

90. U. Andreaus, M. Colloca, D. Iacoviello. An optimal control procedure for bone adaptation under mechanical stimulus, Control Engineering Practice 20 (2012) 575–583, DOI: 10.1016/j.conengprac.2012.02.002, Scopus: 2-s2.0-84859621525, ISI: 303640000003. 90

91. U. Andreaus, P. Baragatti, Experimental damage detection of cracked beams by using nonlinear characteristics of forced response. Mech. Syst. Signal Process. (2012), Vol. 31(8), pp. 382- 404, DOI: 10.1016/j.ymssp.2012.04.007, Scopus: 2-s2.0-84861639580, ISI: 305842600026. 91

92. U. Andreaus, B. Chiaia, L. Placidi. Soft-impact dynamics of deformable bodies, Continuum Mechanics and Thermodynamics, Vol. 25(2-4), pp. 375-398. Published online: 28 August 2012. Printed version March 2013. DOI: 10.1007/s00161-012-0266-5, Scopus: 2-s2.0-84865284668, ISI: 000323249300017. 92

93. U. Andreaus, M. Colloca, D. Iacoviello, Modelling of trabecular architecture as result of an optimal control procedure. In: Biomedical Imaging and Computational Modeling in Biomechanics (eds. D. Iacoviello, U. Andreaus). Chapter II. Dordrecht, Springer. (2012) pp. 19-37, ISBN 940074269X, 9789400742697. 93

94. Campioni, G. Notarangelo, U. Andreaus, A. Ventura, C. Giacomozzi. Hip Prostheses Computational Modeling: FEM simulations integrated with fatigue mechanical tests. In: Biomedical Imaging and Computational Modeling in Biomechanics (eds. D. Iacoviello, U. Andreaus), Collana: Lecture Notes in Computational Vision and Biomechanics. Chapter V. Dordrecht, Springer. (2012) pp. 81-108. 94

95. C. Giacomozzi, U. Andreaus, M. Rogante, I. Campioni (2012), Fatigue behaviour of artificial femoral stems: the role of Regulations and FE analysis. The National Congress of Italian Group of Bioengineering (GNB 2012), June 26-29, 2012, Rome. 95

96. Campioni, U. Andreaus, A. Ventura, C. Giacomozzi. Hip Prostheses Computational Modeling: mechanical behavior of a femoral stem associated with different constraint materials and configurations. CompIMAGE 2012 - Computational Modeling of Objects Presented in Images: Fundamentals, Methods and Applications, 3rd edition, Rome, Italy, September 5-7, 2012. 96

97. U. Andreaus, A. Ancillao. Finite element analysis of the stress state produced by an orthodontic skeletal anchorage system based on miniscrews. J. of Cranio-Maxillary Diseases 2(1) 2013, 28-37, Web publication 17 June 2013, DOI: 10.4103/2278-9588.113586, Scopus: non si trova, WOS: non si trova.  97

98. U. Andreaus, L. Placidi, G. Rega. Microcantilever dynamics in tapping mode atomic force microscopy via higher eigenmodes analysis. J. of Applied Physics 113(22), 2013, Article number 224302, pages 1-14, Published 14 June 2013, DOI: 10.1063/1.4808446, eid= 2-s2.0-84879197166, WOS: 000320675300036. 98

99. Andreaus U., Scerrato Daria, Giorgio V., I. Giorgio. The influence of different geometries of matrix/scaffold on the response of a bone and resorbable material mixture with voids. 4th Canadian Conference on Nonlinear Solid Mechanics, CanCNSM2013, Montréal, Canada, July 23-26, 2013. 99

100. Andreaus U., Giorgio I., Placidi L., Rosi G., Models for remodelling in porous bone reconstructed tissues saturated with interstitial fluids, 4th Canadian Conference on Nonlinear Solid Mechanics, CanCNSM2013, Montréal, Canada, July 23-26, 2013. 100

101. Andreaus U., Placidi L., Rega G., Higher order eigenmodes in tapping mode atomic force microscopy, 4th Canadian Conference on Nonlinear Solid Mechanics, CanCNSM2013, Montréal, Canada, July 23-26, 2013. 101

102. Rega, G., Andreaus, U., Placidi, L., Settimi, V., Nonlinear dynamics of atomic force microscopy, Proc. of the Int. Conf. on Nonlinear Dynamics in Engineering: Modeling, Analysis and Applications, 20-23 August, Aberdeen, 53, 2013. 102

103. U. Andreaus, I. Giorgio. T. Lekszycki. A 2-D continuum model of a mixture of bone tissue and bio-resorbable material for simulating mass density redistribution under load slowly variable in time. J. of Applied Mathematics and Mechanics, Zeitschrift für angewandte Mathematik und Mechanik (ZAMM), 94(12) 2014, 978-1000, DOI:10.1002/zamm.201200182, Scopus: eid=2-s2.0-84913606627, ISI: WOS:000345975800001. 103

104. U. Andreaus, M. Colloca., D. Iacoviello. Optimal bone density distributions: Numerical analysis of the osteocyte spatial influence in bone remodeling. Comput. Methods Programs Biomed. 113(1), 80-91, 2014. Published on-line: 14 September 2013. DOI: 10.1016/j.cmpb.2013.09.002, Scopus: 2-s2.0-84887815934, ISI: 000327180900007. 104

105. Andreaus U., Giorgio I., Madeo A.,  The influence of different loads on the remodeling process of a bone and bioresorbable material mixture with voids, Continuum Mech. Thermodyn., Published online: 11 December 2014, March 2016, Volume 28, Issue 1, pp 21-40, DOI: 10.1007/s00161-014-0397-y.

106. Andreaus U., Giorgio I., Madeo A., Modeling of the interaction between bone tissue and resorbable biomaterial as linear elastic materials with voids,  J. of Applied Mathematics and Physics / Zeitschrift für angewandte Mathematik und Physik (ZAMP), Z. Angew. Math. Phys. 66(1) (2015), 209–237, DOI 10.1007/s00033-014-0403-z. Scopus: eid=2-s2.0-84922337999, ISI: WOS:000349030200013. 106

107. dell’Isola F., Andreaus U., Cazzani A., Placidi L., (2014). Gabrio Piola’s Works translated into English: A tribute to a great. mathematical-physicist who participated to Italian Risorgimento (Resurgence), In: (a cura di): F. dell'Isola, G. Maier, U. Perego, U. Andreaus, R. Esposito, S. Forest, The complete works of Gabrio Piola, Vol. I, Chapter 0. ADVANCED STRUCTURED MATERIALS Vol. 38, pp. viii-x, Springer, ISSN: 1869-8433, doi ?. 107

108. dell’isola F. Andreaus U., Placidi L., Scerrato D.,(2014).  About the fundamental equations of the motion of bodies whatsoever, as considered following the natural their form and constitution. MEMOIR OF SIR DOCTOR GABRIO, In: (a cura di): U. Andreaus, F. dell’Isola, R. Esposito, S. Forest, G. Maier, and U. Perego, The complete works of Gabrio Piola, Vol. I, Chapter 1. ADVANCED STRUCTURED MATERIALS Vol. 38, pp. 1-370, Springer, ISSN: 1869-8433, 10.1007/978-3-319-00263-7_1. 108

109. dell'Isola F., Andreaus U., Cazzani A., Perego U., Placidi L., Ruta G., Scerrato D., (2014). On a debated principle of Lagrange analytical mechanics and on its multiple applications, In: (a cura di): U. Andreaus, F. dell’Isola, R. Esposito, S. Forest, G. Maier, and U. Perego, The complete works of Gabrio Piola, Vol. I, Chapter 2. ADVANCED STRUCTURED MATERIALS Vol. 38, pp. 371-590, Springer, ISSN: 1869-8433, 10.1007/978-3-319-00263-7_2. 109

110. dell'Isola F., Andreaus U., (2014). 1818 Discorso necrologico del Prof. Gabrio Piola. In: (a cura di): F. dell'Isola, G. Maier, U. Perego, U. Andreaus, R. Esposito, S. Forest, The complete works of Gabrio Piola, Vol. I, Chapter 3. ADVANCED STRUCTURED MATERIALS Vol. 38, pp. 592-604, Springer, ISSN: 1869-8433, doi: 10.1007/978-3-319-00263-7_3. 110

111. dell'Isola F., Andreaus U., Placidi L., (2014). A still topical contribution of Gabrio Piola to Continuum Mechanics: the creation of peri-dynamics, non-local and higher gradient continuum mechanics. In: (a cura di): U. Andreaus, F. dell’Isola, R. Esposito, S. Forest, G. Maier, and U. Perego, The complete works of Gabrio Piola, Vol. I, Chapter 5. ADVANCED STRUCTURED MATERIALS Vol. 38, pp. 696-750, Springer, ISSN: 1869-8433, doi: 10.1007/978-3-319-00263-7_5. 111

112. dell'Isola F., Andreaus U., Placidi L. (2015). At the origins and in the vanguard of peridynamics, non-local and higher gradient continuum mechanics. An underestimated and still topical contribution of Gabrio Piola. MATHEMATICS AND MECHANICS OF SOLIDS, vol. 20(8), p. 887-928, ISSN: 1081-2865, doi: 10.1177/1081286513509811. 112

113. dell’Isola F., Giorgio I., Andreaus U., Elastic pantographic 2D lattices: a numerical analysis on static response and wave propagation, Proceedings of the Estonian Academy of Sciences 64(3):219-225 · August 2015, DOI: 10.3176/proc.2015.3.03. 113

114. Andreaus U., Casini P., Identification of multiple open and fatigue cracks in beam-like structures using wavelets on deflection signals, Continuum Mechanics and Thermodynamics, First online: 19 May 2015, Volume 28, Issue 1-2, 1 March 2016, pp. 361-378, DOI: 10.1007/s00161-015-0435-4, Scopus: 2-s2.0-84953638925, WOS:000368078300023  114

115. Andreaus U. , Placidi L, Della Corte A., Lekszycki L, Gedanken experiments for the determination of two-dimensional linear second gradient elasticity coefficients, Z. Angew. Math. Phys., 66(6), 2015, Pages 3699-3725, DOI 10.1007/s00033-015-0588-9            115

116. Andreaus U., Baragatti B., Placidi L., Experimental and numerical investigations of the responses of a cantilever beam possibly contacting a deformable and dissipative obstacle under harmonic excitation, International Journal of Non-Linear Mechanics 2015, 10.1016/j.ijnonlinmec.2015.10.007, Available online 28 October 2015, Scopus: =2-s2.0-84949034242 116

117. Giorgio I., Andreaus U., Lekszycki T., Della Corte A., The influence of different geometries of matrix/scaffold on the remodeling process of a bone and bioresorbable material mixture with voids, Mathematics and Mechanics of Solids, Published online before print December 7, 2015, doi: 10.1177/1081286515616052, pp. 1-19. 117

118. Andreaus U., De Angelis M., Nonlinear dynamic response of a base-excited SDOF oscillator with double-side unilateral constraints, Nonlinear Dynamics, Published online: 07 January 2016, 84(3), pp. 1447–1467, DOI 10.1007/s11071-015-2581-4, Scopus: 2-s2.0-84953402455                  118

119. Giorgio I., Andreaus U., Scerrato D., dell’Isola F., A visco-poroelastic model of functional adaptation in bones reconstructed with bio-resorbable materials, Biomechanics and Modeling in Mechanobiology, 2016, 10.1007/s10237-016-0765-6 117 119

120. Andreaus U., Giorgio I., Placidi L., Identification of two-dimensional pantographic structure via a linear D4 orthotropic second gradient elastic model,  J. of Engineering Mathematics, 103(1), 2017, 1-21,DOI: 10.1007/s10665-016-9856-8. 120

121. Giorgio I., Andreaus U., Scerrato D., Braidotti P., Modeling of a non-local stimulus for bone remodeling process under cyclic load: Application to a dental implant using a bioresorbable porous material, Mathematics and Mechanics of Solids, March 2016, pp. 1-16, DOI: 10.1177/1081286516644867

122. Andreaus U., Baragatti P., Casini P., Iacoviello D., Experimental damage evaluation of open and fatigue cracks of multi-cracked beams by using wavelet transform of static response via image analysis, Structural Control and Health Monitoring, Published online: 29 June 2016, 24(4), 2017, pp. 1-16, Article number e1902, Scopus: 2-s2.0-84977502250, DOI: 10.1002/stc.1902.

123. Andreaus U., dell’Isola F., Giorgio I., Placidi L., Lekszycki T., Rizzi N. L., Numerical simulations of classical problems in two-dimensional (non) linear second gradient elasticity, Int. J. of Engineering Science, Vol. 108, November 2016, pp. 34-50. doi: 10.1016/j.ijengsci.2016.08.003

124. Giorgio I., Andreaus U., dell'Isola F., Lekszycki T., Viscous second gradient porous materials for bones reconstructed with bio-resorbable grafts, Extreme Mechanics Letters, February 29, 2016, DOI: 10.1016/j.eml.2017.02.008 In Press

125. Andreaus U., Baragatti P., De Angelis M., Perno S., A preliminary experimental study about two-sided impacting SDOF oscillator under harmonic excitation, J. of Computational and Nonlinear Dynamics, 2017; 12(6):061010-061010-10, doi:10.1115/1.4036816

126. Andreaus U., Baragatti P., De Angelis M., Perno S., Shaking table tests and numerical investigation of two-sided damping constraint for end-stop impact protection, Nonlinear Dynamics, DOI: 10.1007/s11071-017-3810-9 (http://rdcu.be/wlnQ )

127. Placidi L., Barchiesi E., Misra A., Andreaus U. (2018) Variational Methods in Continuum Damage and Fracture Mechanics. In: Altenbach H., Öchsner A. (eds) Encyclopedia of Continuum Mechanics. Springer, Berlin, Heidelberg
     DOI: 10.1007/978-3-662-53605-6_199-1, Online ISBN , 978-3-662-53605-1

128. Andreaus U., Giorgio I. (2018) Variational Principles in Numerical Practice. In: Altenbach H., Öchsner A. (eds) Encyclopedia of Continuum Mechanics. Springer, Berlin, Heidelberg , DOI: 10.1007/978-3-662-53605-6, Online ISBN 978-3-662-53605-6

129. Spagnuolo M., Andreaus U., A targeted review on large deformations of planar elastic beams: extensibility, distributed loads, buckling and post-buckling, Mathematics and Mechanics of Solids 1–23, First Published February 5, 2018, DOI: 10.1177/1081286517737000

130. Andreaus, U., Spagnuolo, M., Lekszycki, T. Eugster S.R., A Ritz approach for the static analysis of planar pantographic structures modeled with nonlinear Euler–Bernoulli beams, Continuum Mech. Thermodyn. (2018), 30 April 2018, pp. 1-21, DOI: 10.1007/s00161-018-0665-3, Scopus 2-s2.0-85046105282.

131. Giorgio I., Andreaus U., Scerrato D., Biaxial bias extension test for pantographic sheets (2018),Shell Structures: Theory and Applications Volume 4 - Proceedings of the 11th International Conference on Shell Structures: Theory and Applications, SSTA 2017, pp. 93-96; Gdańsk; Poland; 11 October 2017 through 13 October 2017; Code 221159. doi: 10.1201/9781315166605-16, Scopus: 2-s2.0-85063919063, ISBN: 9781138050457, Ed.: CRC Press/Balkema.          131

132. Dell’Isola, Francesco; Seppecher, Pierre; Alibert, Jean Jacques; Lekszycki, Tomasz; Grygoruk, Roman; Pawlikowski, Marek; Steigmann, David; Giorgio, Ivan; Andreaus, Ugo; Turco, Emilio; Gołaszewski, Maciej; Rizzi, Nicola; Boutin, Claude; Eremeyev, Victor A.; Misra, Anil; Placidi, Luca; Barchiesi, Emilio; Greco, Leopoldo; Cuomo, Massimo; Cazzani, Antonio; Corte, Alessandro Della; Battista, Antonio; Scerrato, Daria; Eremeeva, Inna Zurba; Rahali, Yosra; Ganghoffer, Jean-François; Müller, Wolfgang; Ganzosch, Gregor; Spagnuolo, Mario; Pfaff, Aron; Barcz, Katarzyna; Hoschke, Klaus; Neggers, Jan; Hild, François, Pantographic metamaterials: an example of mathematically driven design and of its technological challenges, CONTINUUM MECHANICS AND THERMODYNAMICS, pp. 1-34, in press, doi: 10.1007/s00161-018-0689-8, Scopus: 2-s2.0-85049121393, Published online: 30 June 2018         132

133. Andreaus U., De Angelis M., Experimental and numerical dynamic response of a SDOF vibro‑impact system with double gaps and bumpers under harmonic excitation, International Journal of Dynamics and Control (ISSN 2195-268X), DOI 10.1007/s40435-019-00532-x, https://doi.org/10.1007/s40435-019-00532-x.          133

134. Giorgio I. , dell'isola F., Andreaus U., Alzahrani F., Hayat T., Lekszycki T., On mechanically driven biological stimulus for bone remodeling as a diffusive phenomenon, May 2019, Biomechanics and Modeling in Mechanobiology, pp. 1-25, First Online: 17 May 2019, DOI: 10.1007/s10237-019-01166-w          134

135. Andreaus U. (2019) Reflections on the Units and on the Measures of the Various Physical Quantities (Book Chapter). In: dell'Isola F. et al. (eds) The Complete Works of Gabrio Piola: Volume II. Advanced Structured Materials, vol 97, Pages 729-845. Springer, Cham. DOI: 10.1007/978-3-319-70692-4_5, Scopus: 2-s2.0-85054697043          135

136. dell’Isola, F., Seppecher, P., Spagnuolo, M., Barchiesi, E., Hild, F., Lekszycki, T., Giorgio, I., Placidi, L., Andreaus, U., Cuomo, M., Eugster, S.R., Pfaff, A., Hoschke, K., Langkemper, R., Turco, E., Sarikaya, R., Misra, A., De Angelo, M., D’Annibale, F., Bouterf, A., Pinelli, X., Misra, A., Desmorat, B., Pawlikowski, M., Dupuy, C., Scerrato, D., Peyre, P., Laudato, M., Manzari, L., Göransson, P., Hesch, C., Hesch, S., Franciosi, P., Dirrenberger, J., Maurin, F., Vangelatos, Z., Grigoropoulos, C., Melissinaki, V., Farsari, M, Muller, W., Abali, B.E., Liebold, C., Ganzosch, G., Harrison, P., Drobnicki, R., Igumnov, L., Alzahrani, F., Hayat, T., Advances in pantographic structures: design, manufacturing, models, experiments and image analyses, Continuum Mechanics and Thermodynamics, Volume 31, Issue 4, 1 July 2019, Pages 1231-1282, Scopus 2-s2.0-85065039344, WOS:000475788200020, DOI: 10.1007/s00161-019-00806-x          136

137. Ivan Giorgio, Ugo Andreaus, Faris Alzahrani, Tasawar Hayat, Tomasz Lekszycki, A Diffusion Model for Stimulus Propagation in Remodeling Bone Tissues, Published in: Higher Gradient Materials and Related Generalized Continua, Advanced Structured Materials 120, H. Altenbach et al. (eds.), Springer International Publishing, https://doi.org/10.1007/978-3-030-30406-5_5          137

138. Andreaus U., De Angelis M., Influence of the characteristics of isolation and mitigation devices on the response of SDOF vibro-impact systems with two-sided bumpers and gaps via shaking table tests, 2019, Structural Control and Health Monitoring, 27(5), 1 May 2020, Article number e2517, pp. 1-21, ISSN: 15452255, DOI: 10.1002/stc.2517, Scopus: 2-s2.0-85079430307, WOS: 000512579900001, First published: 10 February 2020.         137

139. Ivan Giorgio, Nicola L. Rizzi, Ugo Andreaus and David J. Steigmann, A two-dimensional continuum model of pantographic sheets moving in a 3D space and accounting for the offset and relative rotations of the fibers. Mathematics and Mechanics of Complex Systems 7-4 (2019), 311--325. DOI 10.2140/memocs.2019.7.311          139

140. Stefani, G., De Angelis, M., and Andreaus, U.: Experimental dynamic response of a SDOF oscillator constrained by two symmetrically arranged deformable and dissipative bumpers under harmonic base excitation. In: Nonlinear Dynamics and Control, eds. , W. Lacarbonara, B. Balachandran, J. Ma, J. A. Tenreiro Machado, G. Stepan, Proc. of the 1st Int. Nonlinear Dynamics Conf. (NODYCON 2019), Volume II, pp. 119-127, 17-20 February 2019, Roma, Italia, 10.1007/978-3-030-34747-5_12, WOS:000675494100012, Scopus 2-s2.0-85088398245         140

141. Stefani, Giulia; De Angelis, Maurizio; Andreaus, Ugo, Experimental and numerical investigation of base isolated SDOF system impact against bumpers under harmonic base excitation, COMPDYN 2019 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering. Proceedings Volume II, pp. 3333-3343, Crete; Greece, 24 - 26 June 2019, DOI: 10.7712/120119.7150.19207, Scopus: 2-s2.0-85079050104, ISBN: 978-618-82844-5-6          141

142. Stefani, G., De Angelis, M., Andreaus, U.: Experimental and numerical response analysis of a unilaterally constrained SDOF system under harmonic base excitation. Proc. XXIV Conf. Italian Association of Theoretical and Applied Mechanics, 15-19 September 2019, Roma, Italia, AIMETA2019 (2019) In: Carcaterra A., Paolone A., Graziani G. (eds). Proceedings of XXIV AIMETA Conference 2019. AIMETA 2019. Lecture Notes in Mechanical Engineering Springer, Cham, First Online 31 March 2020, DOI: 10.1007/978-3-030-41057-5_120.       142

143. Mario Spagnuolo · Erden Yildizdag · Ugo Andreaus · Antonio M Cazzani. Are higher-gradient models also capable of predicting mechanical behavior in the case of wide-knit pantographic structures? Mathematics and Mechanics of Solids. First Published July 14, 2020, https://doi.org/10.1177/1081286520937339, Vol 26, Issue 1, pp. 18-29, 2021          143

144. I. Giorgio, M. Spagnuolo, U. Andreaus, D. Scerrato, A. M. Bersani. In-depth gaze at the astonishing mechanical behavior of bone: A review for designing bio-inspired hierarchical metamaterials. Mathematics and Mechanics of Solids. First Published December 25, 2020, https://doi.org/10.1177/1081286520978516, Vol 26, Issue 7, 2021

145. Stefani, G., De Angelis, M., Andreaus, U. Scenarios in the experimental response of a vibro-impact single-degree-of-freedom system and numerical simulations, Nonlinear Dynamics 2020, article available online, 22 July 2020, DOI: 10.1007/s11071-020-05791-4, Nonlinear Dyn 103, 3465–3488 (2021), WOS:000551364000001     145.

146. G. Stefani, M. De Angelis, U. Andreaus, Numerical study on the response scenarios in a vibro-impact single-degree-of-freedom oscillator with two unilateral dissipative and deformable constraints, Communications in Nonlinear Science and Numerical Simulation, Available online 12 March 2021, 105818, https://doi.org/10.1016/j.cnsns.2021.105818, Volume 99, 2021, ISSN 1007-5704, Scopus 2-s2.0-85103113244 146.

147. Spagnuolo M., Andreaus U., Misra A, Giorgio I., Hild F., Mesoscale modeling and experimental analyses for pantographic cells: Effect of hinge deformation, Mechanics of Materials, Vol. 160, 2021, article number 103924, pp. 1-11, ISSN 0167-6636, DOI 10.1016/j.mechmat.2021.103924, Scopus 2-s2.0-85107148144 147

148.  Stefani G., De Angelis M., Andreaus U., Influence of the gap size on the response of a single-degree-of-freedom vibro-impact system with two-sided constraints: Experimental tests and numerical modeling. International Journal of Mechanical Sciences 206 (2021) 106617, pp. 1-16, https://doi.org/10.1016/j.ijmecsci.2021.106617, Scopus: 2-s2.0-85109568075, WOS:000696636500003 148 

149. Stefani, G., De Angelis, M., Andreaus, U. (2022). Preliminary Experimental Study on the Influence of the Gap in a Vibro-Impact System with Two-Sided Constraints. In: Lacarbonara, W., Balachandran, B., Leamy, M.J., Ma, J., Tenreiro Machado, J.A., Stepan, G. (eds) Advances in Nonlinear Dynamics. NODYCON Conference Proceedings Series. Springer, Cham. https://doi.org/10.1007/978-3-030-81166-2_28, Published 25 June 2021, Publisher Name Springer, Cham.           149

150. Stefani, G.;De Angelis, M.;Andreaus, U. The effect of the presence of obstacles on the dynamic response of single-degree-of-freedom systems: Study of the scenarios aimed at vibration control, Journal of Sound and Vibration, Volume 531, 4 August 2022 Article number 116949, pp. 1-21, 10.1016/j.jsv.2022.116949, WOS:000803821600005, Codice Scopus 2-s2.0-85129721956      150

151. Optimal design of single-degree-of-freedom vibro-impact system under harmonic base excitation / Perna, Giuseppe; De Angelis, Maurizio; Andreaus, Ugo. - 26:(2023), pp. 429-434. (Intervento presentato al convegno 25th Conference of the Italian Association of Theoretical and Applied Mechanics, AIMETA 2022 tenutosi a Palermo; Italy) [10.21741/9781644902431-70].          151

152. Preliminary Numerical Analysis of the Response of Base-Isolated SDOF Systems Constrained by Two Deformable Devices Under Seismic Excitations / Perna, Giuseppe; De Angelis, Maurizio; Andreaus, Ugo. - (2023), pp. 948-965. (Intervento presentato al convegno 17WCSI tenutosi a Turin) [10.1007/978-3-031-21187-4_84].          152

153. Preliminary numerical analysis of the Vibro-Impact Isolation systems under seismic excitations / Perna, Giuseppe; DE ANGELIS, Maurizio; Andreaus, Ugo. - (2023). (Intervento presentato al convegno NODYCON2023 tenutosi a Rome; Italy).          153

154. An orthotropic continuum model with substructure evolution for describing bone remodeling: an interpretation of the primary mechanism behind Wolff’s law / Giorgio, Ivan; Dell’Isola, Francesco; Andreaus, Ugo; Misra, Anil. - In: BIOMECHANICS AND MODELING IN MECHANOBIOLOGY. - ISSN 1617-7959. - 22:6(2023), pp. 2135-2152. [10.1007/s10237-023-01755-w]           154

155. Numerical steady-state and transient responses of a SDOF system constrained by two optimally designed bumpers / Perna, Giuseppe; DE ANGELIS, Maurizio; Andreaus, Ugo. - In: STRUCTURES. - ISSN 2352-0124. - 57:(2023). [10.1016/j.istruc.2023.105270]            155

Riviste internazionali (78)

1. A linear programming method of deflection analysis at plastic collapse in elastic-perfectly plastic frame structures, Arch. Inz. Lad., 27(3), 1981, 437-450. 3

2. Deflection of elastic-plastic frames at finite spread of yielding zones, Comput. Meths. Appl. Mech. Engng., 39(1), 1983, 21-36 (A. Sawczuk). 6

3. On compact matrix description of rigid-perfectly plastic skeletal structures, Arch. Inz. Lad., 29(1-2), 1983, 5-15 (A. Borkowski). 9

4. Incremental analysis of elastic-plastic frames at finite spread of yielding zones, Engng. Fract. Mech., 21(4), 1985, 827-839 (P. D’Asdia). 10

5. Displacement analysis in elastic-plastic frames at plastic collapse, Comput. Meths. Appl. Mech. Engng., 42(1), 1984, 19-35 (P. D’Asdia). 13

6. Damage modelling and seismic response of simple degrading systems, Res Mech., 22(1), 1987, 79-100 (G. Ceradini, P. D’Asdia, P. Gaudenzi). Senza DOI. Scopus eid=2-s2.0-0023177373, WOS: A1987J540800005 24

7. An incremental procedure for deformation analysis of elastic-plastic frames, Int. J. Numer. Methods. Eng., 26(4), 1988, 769-784 (P. D’Asdia). 27

8. Modelling of cyclic behaviour of steel braces, Res Mech., 26(3), 1989, 267-288 (P. Gaudenzi). 31

9. Sliding-uplifting response of rigid blocks to base excitation, Earthq. Eng. & Struct. Dyn., 19( 8), 1990, 1181-1196. 36

10. Failure modes of solid brick masonry under in-plane loading, Mas. Int., 6(1), 1992, 4-8 (G. Ceradini). 41

11. Failure criteria for masonry panels under in-plane loading, J. Struct. Div., ASCE, 122(1), 1996, 37-46, DOI: 10.1061/(ASCE)0733-9445(1996)122:1(37). 47

12. On thermokinematic analysis of pipe shaping in cast ingots: a numerical simulation via FDM, Int. J. of Eng. Sci., 34(12), 1996, 1349-1367 (F. dell’Isola). 48

13. An analytical-numerical model for contact-impact problems: theory and implementation in a two-dimen­sional distinct element algorithm, Comput Mod. & Sim. in Eng., 3(2), 1998, 98-110 (N. Nisticò). Computer  Modeling and Simulation in Engineering 49

14. A review of the problem of the shear centre(s), Cont. Mechs. & Thermodyn., 10(6), 1998, 369-380 (G. Ruta). DOI: 10.1007/s001610050100, Scopus: eid=2-s2.0-0032262569, ISI: WOS:000077854000005 50

15. Rocking-sliding of a rigid block: friction influence on free motion, Engng. Trans., 46(2), 1998, 143-164 (P. Casini). 51

16. On the rocking-uplifting motion of a rigid block in free and forced motion: influence of sliding and boun­cing, Acta Mech., 138, 1-23, 1999 (P. Casini). 52

17. Torsion of Saint-Venant Cylinders with a Non-Simply Connected Cross Section, Engng. Trans., 47(1), 1999, 77-91, (T. Jablonski). 54

18. An incremental finite element procedure for cumulative damage of 2-D continua via two surface plasti­city, Comput Mod. & Sim. in Eng., 4(2), 1999, pp. 143-149 (S. Vidoli). Computer  Modeling and Simulation in Engineering, ISSN 1083-3455. 55

19. Dynamics of three rigid block assemblies with unilateral deformable contacts. Part 1: Contact modelling, Earthq. Eng. & Struct. Dyn., 28(12), 1999, 1621-1636 (P. Casini). 56

20. Dynamics of three rigid block assemblies with unilateral deformable contacts. Part 2: Sample applica­tion, Earthq. Eng. & Struct. Dyn., 28(12), 1999, 1637-1649 (P. Casini). 57

21. Dynamics of SDOF oscillators with hysteretic motion-limiting stop, J. of Nonlin. Dyn., 22, pp. 155-174, 2000 (P. Casini). DOI: 10.1023/A:1008354220584, Scopus: eid=2-s2.0-0033716334,
    WOS: 000087601000002 58

22. Dynamics of friction oscillators excited by moving base or/and driving force, J. of Sound & Vib., 245(4), pp. 685-699, 2001 (P. Casini). DOI: 10.1006/jsvi.2000.3555, Scopus: eid=2-s2.0-0035939863, WOS: 000170499800006 59

23. Forced motion of friction oscillators limited by a rigid or deformable obstacle, Mech. Struct. & Mach., 29(2), 177-198 (2001), (P. Casini). DOI:10.1081/SME-100104479, Scopus: eid=2-s2.0-0035327970, WOS: 000170372000002 61

24. Friction oscillator excited by moving base and colliding with a rigid or deformable obstacle, Int. J. of Nonlin. Mech., 37(1), pp. 117-133, 2002 (P. Casini). DOI: 10.1016/S0020-7462(00)00101-3, Scopus: eid=2-s2.0-0036028167 62

25. Frequency reduction in elastic beams due to a stable crack: numerical results compared with measured test   data, Engng. Trans., 51(1), pp. 87-101, 2003 (P. Casini, F. Vestroni). 63

26. Piezoelectric passive distributed controllers for beam flexural vibrations, Int. J. Vibration and Control, 23, pp. 625-659, 2004 (F. dell’Isola, M. Porfiri), DOI: 10.1177/1077546304038224, Scopus: 2-s2.0-2442718054, ISI: 221656400001. 67

27. Piezo-ElectroMechanical (PEM) Kirchhoff-Love plates, European J. of Mechs. A/Solids, 23, pp. 689-702, 2004 (S. Alessandroni, F. dell’Isola, M. Porfiri), DOI: 10.1016/j.euromechsol.2004.03.003, Scopus: 2-s2.0-2942606291, ISI 222593700011. 68

28. A passive electric controller for multimodal vibrations of thin plates, Comput. & Struct. 83(15-16), 1236-1250, 2005 (S. Alessandroni, F. dell’Isola, M. Porfiri), DOI: 10.1016/j.compstruc.2004.08.028, Scopus: 2-s2.0-17044422603, ISI: 229693100008. 69

29. Vibrations of Cracked Euler-Bernoulli Beams using Meshless Local Petrov-Galerkin (MLPG) Method, Computer and Modeling in Engineering & Science (CMES), 9(2) 111-131, 2005 (R. Batra, M. Porfiri). 71

30. Effect of Electrical Uncertainties on Resonant Piezoelectric Shunting, Intelligent Material, Systems andStructures, Vol. 18(5), 477-485, 2007 (M. Porfiri), http://dx.medra.org/10.1177/1045389X06067116. 73

31. Nonlinear Dynamics of a Cracked Cantilever Beam Under Harmonic Excitation, Int. J. of Non-Linear Mechanics, doi:10.1016/j.ijnonlinmec.2006.08.007, Vol. 42(3), April, 566-575, 2007 (P. Casini, F. Vestroni). 74

32. Mechanical behaviour of a prosthesized human femur: a comparative analysis between walking and stair climbing by using the finite element method. Biophisics and Bioengineering Letters, Vol. 1(3); 1-15, 2008 (M. Colloca, A. Toscano), ISSN: 2037-0199. 76

33. Andreaus U., Colloca M. (2009). Prediction of micromotion initiation of an implanted femur under physio logical loads and constraints using the finite element method. Procs. of the Inst. of Mechanical Engineers. Part H, J. of Engineering in Medicine, vol. 223(5); p. 589-605, ISSN: 0954-4119,
    doi: 10.1243/09544119JEIM559. 77

34. Andreaus U., Baragatti P. (2009). Fatigue crack growth, free vibrations and breathing crack detection of Aluminium Alloy and Steel beams. J. of Strain Analysis for Engineering Design, Vol. 44(7); p. 595-608, ISSN: 0309-3247, doi: 10.1243/03093247JSA527. 81

35. Andreaus U., Placidi L., Rega G. (2010). Numerical simulation of the soft contact dynamics of an impacting bilinear oscillator. Communications in Nonlinear Science & Numerical Simulation, Vol. 15(9); p. 2603-2616, ISSN: 1007-5704, doi: 10.1016/j.cnsns.2009.10.015. 82

36. U. Andreaus, M. Colloca, D. Iacoviello. Coupling image processing and stress analysis for damage identification in a human premolar tooth. Comput. Methods Programs Biomed. (2010), doi:10.1016/j.cmpb.2010.06.009, Vol. 103(2), pp. 61-73, August 2011. 85

37. U. Andreaus, M. Colloca, D. Iacoviello, M. Pignataro, Optimal-tuning PID control of adaptive materials for structural efficiency, Structural and Multidisciplinary Optimization (2011) 43(1):43–59, DOI: 10.1007/s00158-010-0531-9. 86

38. Andreaus U., Baragatti P. (2011). Cracked beam identification by numerically analysing the nonlinear behaviour of the harmonically forced response. J. of Sound and Vibration, 330(4), 721-742, ISSN: 0022-460X, doi: 10.1016/j.jsv.2010.08.032. 87

39. U. Andreaus, L. Placidi and G. Rega. Soft impact dynamics of a cantilever beam: equivalent SDOF model versus infinite-dimensional system. Proc. of the Institution of Mechanical Engineers, Part C: J. of Mechanical Engineering Science 2011 225(10): 2444-2456, DOI: 10.1177/0954406211414484, Scopus: 2-s2.0-81255158500, ISI: 295686100015. 88

40. U. Andreaus, M. Colloca, D. Iacoviello. An optimal control procedure for bone adaptation under mechanical stimulus, Control Engineering Practice 20 (2012) 575–583, DOI: 10.1016/j.conengprac.2012.02.002, Scopus: 2-s2.0-84859621525, ISI: 303640000003. 90

41. U. Andreaus, P. Baragatti, Experimental damage detection of cracked beams by using nonlinear characteristics of forced response. Mech. Syst. Signal Process. (2012), Vol. 31(8), pp. 382- 404, DOI: 10.1016/j.ymssp.2012.04.007, Scopus: 2-s2.0-84861639580, ISI: 305842600026. 91

42. U. Andreaus, B. Chiaia, L. Placidi. Soft-impact dynamics of deformable bodies, Continuum Mechanics and Thermodynamics, Vol. 25(2-4), pp. 375-398. Published online: 28 August 2012. Printed version March 2013. DOI: 10.1007/s00161-012-0266-5, Scopus: 2-s2.0-84865284668, ISI: 000323249300017. 92

43. U. Andreaus, A. Ancillao. Finite element analysis of the stress state produced by an orthodontic skeletal anchorage system based on miniscrews. J. of Cranio-Maxillary Diseases 2(1) 2013, 28-37, Web publication 17 June 2013, DOI: 10.4103/2278-9588.113586, Scopus: non si trova, WOS: non si trova.  97

44. U. Andreaus, L. Placidi, G. Rega. Microcantilever dynamics in tapping mode atomic force microscopy via higher eigenmodes analysis. J. of Applied Physics 113(22), 2013, Article number 224302, pages 1-14, Published 14 June 2013, DOI: 10.1063/1.4808446, eid= 2-s2.0-84879197166, WOS: 000320675300036. 98

45. U. Andreaus, I. Giorgio. T. Lekszycki. A 2-D continuum model of a mixture of bone tissue and bio-resorbable material for simulating mass density redistribution under load slowly variable in time. J. of Applied Mathematics and Mechanics, Zeitschrift für angewandte Mathematik und Mechanik (ZAMM), 94(12) 2014, 978-1000, DOI:10.1002/zamm.201200182, Scopus: eid=2-s2.0-84913606627, ISI: WOS:000345975800001. 103

46. U. Andreaus, M. Colloca., D. Iacoviello. Optimal bone density distributions: Numerical analysis of the osteocyte spatial influence in bone remodeling. Comput. Methods Programs Biomed. 113(1), 80-91, 2014. Published on-line: 14 September 2013. DOI: 10.1016/j.cmpb.2013.09.002, Scopus: 2-s2.0-84887815934, ISI: 000327180900007. 104

47. Andreaus U., Giorgio I., Madeo A.,  The influence of different loads on the remodeling process of a bone and bioresorbable material mixture with voids, Continuum Mech. Thermodyn., Published online: 11 December 2014, March 2016, Volume 28, Issue 1, pp 21-40, DOI: 10.1007/s00161-014-0397-y.

48. Andreaus U., Giorgio I., Madeo A., Modeling of the interaction between bone tissue and resorbable biomaterial as linear elastic materials with voids,  J. of Applied Mathematics and Physics / Zeitschrift für angewandte Mathematik und Physik (ZAMP), Z. Angew. Math. Phys. 66(1) (2015), 209–237, DOI 10.1007/s00033-014-0403-z. Scopus: eid=2-s2.0-84922337999, ISI: WOS:000349030200013. 106

49. dell'Isola F., Andreaus U., Placidi L. (2015). At the origins and in the vanguard of peridynamics, non-local and higher gradient continuum mechanics. An underestimated and still topical contribution of Gabrio Piola. MATHEMATICS AND MECHANICS OF SOLIDS, vol. 20(8), p. 887-928, ISSN: 1081-2865, doi: 10.1177/1081286513509811. 110

50. Andreaus U., Casini P., Identification of multiple open and fatigue cracks in beam-like structures using wavelets on deflection signals, Continuum Mechanics and Thermodynamics, First online: 19 May 2015, pp. 1-18, DOI: 10.1007/s00161-015-0435-4. 112

51. Andreaus U. , Placidi L, Della Corte A., Lekszycki L, Gedanken experiments for the determination of two-dimensional linear second gradientelasticity coefficients, Z. Angew. Math. Phys., 66(6), 2015, Pages 3699-3725, DOI 10.1007/s00033-015-0588-9          115

52. Andreaus U., Baragatti B., Placidi L., Experimental and numerical investigations of the responses of a cantilever beam possibly contacting a deformable and dissipative obstacle under harmonic excitation, International Journal of Non-Linear Mechanics 2015, 10.1016/j.ijnonlinmec.2015.10.007, Available online 28 October 2015. 114

53. Giorgio I., Andreaus U., Lekszycki T., Della Corte A., The influence of different geometries of matrix/scaffold on the remodeling process of a bone and bioresorbable material mixture with voids, Mathematics and Mechanics of Solids, Published online before print December 7, 2015, doi: 10.1177/1081286515616052, pp. 1-19.

54. Andreaus U., De Angelis M., Nonlinear dynamic response of a base-excited SDOF oscillator with double-side unilateral constraints, Nonlinear Dynamics, Published online: 07 January 2016, 84(3), pp. 1447–1467, DOI 10.1007/s11071-015-2581-4, Scopus: 2-s2.0-84953402455                  118

55. Giorgio I., Andreaus U., Scerrato D., dell’Isola F., A visco-poroelastic model of functional adaptation in bones reconstructed with bio-resorbable materials, Biomechanics and Modeling in Mechanobiology, 2016, 10.1007/s10237-016-0765-6 117.

56. Andreaus U., Giorgio I., Placidi L., Identification of two-dimensional pantographic structure via a linear D4 orthotropic second gradient elastic model,  J. of Engineering Mathematics, 103(1), 2017, 1-21, DOI: 10.1007/s10665-016-9856-8. 120

57. Giorgio I., Andreaus U., Scerrato D., Braidotti P., Modeling of a non-local stimulus for bone remodeling process under cyclic load: Application to a dental implant using a bioresorbable porous material, Mathematics and Mechanics of Solids, March 2016, pp. 1-16, DOI: 10.1177/1081286516644867

58. Andreaus U., Baragatti P., Casini P., Iacoviello D., Experimental damage evaluation of open and fatigue cracks of multi-cracked beams by using wavelet transform of static response via image analysis, Structural Control and Health Monitoring, Published online: 29 June 2016, 24(4), 2017, pp. 1-16, Article number e1902, Scopus: 2-s2.0-84977502250, DOI: 10.1002/stc.1902. 122

59. Andreaus U., dell’Isola F., Giorgio I., Placidi L., Lekszycki T., Rizzi N. L., Numerical simulations of classical problems in two-dimensional (non) linear second gradient elasticity, Int. J. of Engineering Science, Vol. 108, November 2016, pp. 34-50. doi: 10.1016/j.ijengsci.2016.08.003                                123

60. Giorgio I., Andreaus U., dell'Isola F., Lekszycki T., Viscous second gradient porous materials for bones reconstructed with bio-resorbable grafts, Extreme Mechanics Letters, February 29, 2016, DOI: 10.1016/j.eml.2017.02.008 In Press   124

61. Andreaus U., Baragatti P., De Angelis M., Perno S., A preliminary experimental study about two-sided impacting SDOF oscillator under harmonic excitation, J. of Computational and Nonlinear Dynamics, 2017; 12(6):061010-061010-10, doi:10.1115/1.4036816

62. Andreaus U., Baragatti P., De Angelis M., Perno S., Shaking table tests and numerical investigation of two-sided damping constraint for end-stop impact protection, Nonlinear Dynamics, DOI: 10.1007/s11071-017-3810-9 (http://rdcu.be/wlnQ )   126

63. Spagnuolo M., Andreaus U., A targeted review on large deformations of planar elastic beams: extensibility, distributed loads, buckling and post-buckling, Mathematics and Mechanics of Solids 1–23, First Published February 5, 2018, DOI: 10.1177/1081286517737000          129

64. Andreaus, U., Spagnuolo, M., Lekszycki, T. Eugster S.R., A Ritz approach for the static analysis of planar pantographic structures modeled with nonlinear Euler–Bernoulli beams, Continuum Mech. Thermodyn. (2018), 30 April 2018, pp. 1-21, DOI: 10.1007/s00161-018-0665-3, Scopus 2-s2.0-85046105282.     130

65. Dell’Isola, Francesco; Seppecher, Pierre; Alibert, Jean Jacques; Lekszycki, Tomasz; Grygoruk, Roman; Pawlikowski, Marek; Steigmann, David; Giorgio, Ivan; Andreaus, Ugo; Turco, Emilio; Gołaszewski, Maciej; Rizzi, Nicola; Boutin, Claude; Eremeyev, Victor A.; Misra, Anil; Placidi, Luca; Barchiesi, Emilio; Greco, Leopoldo; Cuomo, Massimo; Cazzani, Antonio; Corte, Alessandro Della; Battista, Antonio; Scerrato, Daria; Eremeeva, Inna Zurba; Rahali, Yosra; Ganghoffer, Jean-François; Müller, Wolfgang; Ganzosch, Gregor; Spagnuolo, Mario; Pfaff, Aron; Barcz, Katarzyna; Hoschke, Klaus; Neggers, Jan; Hild, François, Pantographic metamaterials: an example of mathematically driven design and of its technological challenges, CONTINUUM MECHANICS AND THERMODYNAMICS, pp. 1-34, in press, doi: 10.1007/s00161-018-0689-8, Scopus: 2-s2.0-85049121393, Published online: 30 June 2018         132

66. Andreaus U., De Angelis M., Experimental and numerical dynamic response of a SDOF vibro‑impact system with double gaps and bumpers under harmonic excitation, International Journal of Dynamics and Control (ISSN 2195-268X), DOI 10.1007/s40435-019-00532-x, https://doi.org/10.1007/s40435-019-00532-x.   133

67. Giorgio I. , dell'isola F., Andreaus U., Alzahrani F., Hayat T., Lekszycki T., On mechanically driven biological stimulus for bone remodeling as a diffusive phenomenon, May 2019, Biomechanics and Modeling in Mechanobiology, pp. 1-25, First Online: 17 May 2019, DOI: 10.1007/s10237-019-01166-w          134

68. dell’Isola, F., Seppecher, P., Spagnuolo, M., Barchiesi, E., Hild, F., Lekszycki, T., Giorgio, I., Placidi, L., Andreaus, U., Cuomo, M., Eugster, S.R., Pfaff, A., Hoschke, K., Langkemper, R., Turco, E., Sarikaya, R., Misra, A., De Angelo, M., D’Annibale, F., Bouterf, A., Pinelli, X., Misra, A., Desmorat, B., Pawlikowski, M., Dupuy, C., Scerrato, D., Peyre, P., Laudato, M., Manzari, L., Göransson, P., Hesch, C., Hesch, S., Franciosi, P., Dirrenberger, J., Maurin, F., Vangelatos, Z., Grigoropoulos, C., Melissinaki, V., Farsari, M, Muller, W., Abali, B.E., Liebold, C., Ganzosch, G., Harrison, P., Drobnicki, R., Igumnov, L., Alzahrani, F., Hayat, T., Advances in pantographic structures: design, manufacturing, models, experiments and image analyses, Continuum Mechanics and Thermodynamics, Volume 31, Issue 4, 1 July 2019, Pages 1231-1282, Scopus 2-s2.0-85065039344, WOS:000475788200020, DOI: 10.1007/s00161-019-00806-x          136

69. Ivan Giorgio, Ugo Andreaus, Faris Alzahrani, Tasawar Hayat, Tomasz Lekszycki, A Diffusion Model for Stimulus Propagation in Remodeling Bone Tissues, Published in: Higher Gradient Materials and Related Generalized Continua, Advanced Structured Materials 120, H. Altenbach et al. (eds.), Springer International Publishing, https://doi.org/10.1007/978-3-030-30406-5_5          137

70. Andreaus U., De Angelis M., Influence of the characteristics of isolation and mitigation devices on the response of SDOF vibro-impact systems with two-sided bumpers and gaps via shaking table tests, 2019, Structural Control and Health Monitoring, 27(5), 1 May 2020, Article number e2517, pp. 1-21, ISSN: 15452255, DOI: 10.1002/stc.2517, Scopus: 2-s2.0-85079430307, WOS: 000512579900001, First published: 10 February 2020.         137

71. Ivan Giorgio, Nicola L. Rizzi, Ugo Andreaus and David J. Steigmann, A two-dimensional continuum model of pantographic sheets moving in a 3D space and accounting for the offset and relative rotations of the fibers. Mathematics and Mechanics of Complex Systems 7-4 (2019), 311--325. DOI 10.2140/memocs.2019.7.311          139

72. Mario Spagnuolo · Erden Yildizdag · Ugo Andreaus · Antonio M Cazzani. Are higher-gradient models also capable of predicting mechanical behavior in the case of wide-knit pantographic structures? Mathematics and Mechanics of Solids. First Published July 14, 2020, https://doi.org/10.1177/1081286520937339, Vol 26, Issue 1, pp. 18-29, 2021          143

73. I. Giorgio, M. Spagnuolo, U. Andreaus, D. Scerrato, A. M. Bersani. In-depth gaze at the astonishing mechanical behavior of bone: A review for designing bio-inspired hierarchical metamaterials. Mathematics and Mechanics of Solids. First Published December 25, 2020, https://doi.org/10.1177/1081286520978516, Vol 26, Issue 7, 2021

74. Stefani, G., De Angelis, M., Andreaus, U. Scenarios in the experimental response of a vibro-impact single-degree-of-freedom system and numerical simulations, Nonlinear Dynamics 2020, article available online, 22 July 2020, DOI: 10.1007/s11071-020-05791-4, Nonlinear Dyn 103, 3465–3488 (2021), WOS:000551364000001     145.

75. G. Stefani, M. DeAngelis, U. Andreaus, Numerical study on the response scenarios in a vibro-impact single-degree-of-freedom oscillator with two unilateral dissipative and deformable constraints, Communications in Nonlinear Science and Numerical Simulation, Available online 12 March 2021, 105818, https://doi.org/10.1016/j.cnsns.2021.105818, Volume 99, 2021, ISSN 1007-5704, Scopus 2-s2.0-85103113244 146.

76. Spagnuolo M., Andreaus U., Misra A, Giorgio I., Hild F., Mesoscale modeling and experimental analyses for pantographic cells: Effect of hinge deformation, Mechanics of Materials, Vol. 160, 2021, article number 103924, pp. 1-11, ISSN 0167-6636, DOI 10.1016/j.mechmat.2021.103924, Scopus 2-s2.0-85107148144 147

77.  Stefani G., De Angelis M., Andreaus U., Influence of the gap size on the response of a single-degree-of-freedom vibro-impact system with two-sided constraints: Experimental tests and numerical modeling. International Journal of Mechanical Sciences 206 (2021) 106617, pp. 1-16, https://doi.org/10.1016/j.ijmecsci.2021.106617, Scopus: 2-s2.0-85109568075, WOS:000696636500003 148 

78. Stefani, G.;De Angelis, M.;Andreaus, U. The effect of the presence of obstacles on the dynamic response of single-degree-of-freedom systems: Study of the scenarios aimed at vibration control, Journal of Sound and Vibration, Volume 531, 4 August 2022 Article number 116949, pp. 1-21, 10.1016/j.jsv.2022.116949, WOS:000803821600005, Codice Scopus 2-s2.0-85129721956      149 

79. An orthotropic continuum model with substructure evolution for describing bone remodeling: an interpretation of the primary mechanism behind Wolff’s law / Giorgio, Ivan; Dell’Isola, Francesco; Andreaus, Ugo; Misra, Anil. - In: BIOMECHANICS AND MODELING IN MECHANOBIOLOGY. - ISSN 1617-7959. - 22:6(2023), pp. 2135-2152. [10.1007/s10237-023-01755-w]           154

80. Numerical steady-state and transient responses of a SDOF system constrained by two optimally designed bumpers / Perna, Giuseppe; DE ANGELIS, Maurizio; Andreaus, Ugo. - In: STRUCTURES. - ISSN 2352-0124. - 57:(2023). [10.1016/j.istruc.2023.105270]            155

81.  

Riviste italiane (3)

1. Collasso di pannelli murari soggetti a stati piani di tensione, Costruire in Laterizio (22), 1991, 315-321 (G. Ceradini). (in italian) 40

2. Analisi dello sforzo meccanico all'interfaccia osso corticale - stelo protesico della protesi d’anca mediante il Metodo degli Elementi Finiti, Giornale Italiano di Ortopedia e Traumatologia, Vol 32(5), 198-204, 2006 (M. Colloca). 72

3. Mechanical behaviour of physiological and prosthesized human femurs during stair climbing: a com-
   parative analysis via 3-D numerical simulation. Minerva Ortopedica e Traumatologica, Vol. 59(4); 213-220, 2008 (M. Colloca, A. Toscano). 75

Congressi internazionali (37)

1. Analisi limite di telai piani in acciaio - Parte II: deformazioni e spostamenti di collasso incipiente al 1° ordine, Pubbl. II-343 ISC, Euromech Colloqium 140, Udine 6-9 May 1981 (P. D’Asdia). (in italian) 4

2. Plastic behaviour of structures under variable loads, Pubbl. II-356 ISC, Euromech Colloqium 140, Udine 6-9 May 1981 (A. Cinuzzi, C. Gavarini, P. Nedli). 5

3. A simple model for the dynamic analysis of deteriorating structures, Proc. 7th SMiRT, Chicago 1983, L, 591-598 (G. Ceradini, P. D’Asdia). 11

4. Analysis of elastic-plastic frames at large displacement range accounting for finite spread of yielding zones, Proc. of the Michael R. Horne Conf., IPCSS 83, “Instability and Plastic Collapse of Steel Structures“, Manchester, September 20-22,  1983, 113-121 (P. D’Asdia). 12

5. On the optimal choice of the shape of antiseismic bracing systems, Proc. 8th WCEE, San Francisco, July 21-28, 1984, V, 459-466 (P. D’Asdia, F. Iannozzi). 16

6. Masonry columns under horizontal loads: a comparison between finite element modelling and ex­peri­mental results, Proc. 7IBMaC, 7th Int. Brick/Block Masonry Conf., Melbourne 1985, I, 469-478 (G. Ceradini, M. Cerone, P. D’Asdia). 18

7. A finite element model for the analysis of masonry structures under cyclic actions, Proc. 7IBMaC, 7th Int. Brick/Block Masonry Conf., Melbourne 1985, I, 479-488 (M. Cerone, P. D’Asdia, F. Iannozzi). 19

8. Inelastic response spectra of simple degrading systems, Proc. 8th SMiRT, Brussels, August 19-23, 1985, K(a), 415-420 (G. Ceradini, P. D’Asdia, P. Gaudenzi). Scopus: eid=2-s2.0-0022240261 20

9. A 3-D finite element model for the analysis of masonry structures, Proc. 8IBMaC, 8th Int. Brick/Block Masonry Conf., Dublin, September 19-21, 1988, 3, 1405-1416. 28

10. 3-D analysis of masonry columns with grouted reinforcement bars, Proc. 8IBMaC, 8th Int. Brick/Block Masonry Conf., Dublin, September 19-21, 1988, 3, 1507-1518 (A. di Paolo). 29

11. A frictional model for sliding of jointed blocks, Proc. ICCLEM (Asia), Chongqing, Cina, August 1-13, 1989, I, 249-254. 32

12. Dynamic analysis of deformable block-work structures, Proc. 9th ECEE, Moscow, September 11-16 1990, 7-C, 61-70. 34

13. A two-storey masonry wall under cyclic loading: a comparison between experimental and numerical re­sults, Proc. CMSM 95, 3rd Int. Symp. on “Computer Methods in Structural Masonry”, Vol. unico, Lisbona 19-21 aprile 1995, 68-77 (L. Ippoliti). 43

14. Masonry panels under in-plane loading: a comparison between experimental and numerical results, Proc. CMEM 95, 7th Int. Conf. on “Computational Methods and Experimental Measurements”, Vol. unico, Capri, 16-18th May 1995, 603-610 ( L. Ippoliti). 44

15. A two-storey masonry wall under monotonic loading: a comparison between experimental and numerical results, Proc. STREMA 95, 4th Int. Conf. on Structural Repairs and Maintenance of Historical Buildings), Vol. 1, Creta, 22-24th May 1995, 319-326 (L. Ippoliti). 45

16. A two-storey masonry wall under seismic loading: a comparison between simple and strengthened ma­sonry, Proc. ERES 96, 1st Int. Conf. on “Earthquake Resistant Engineering Structures”, Vol. 2, Thessaloniki, October 30 – November 1 1996, 561-570 (L. Ippoliti) [554.L]. 46

17. Stone arch bridges under in-plane loading: discrete element modelling and incremental analysis up to failure, Proc. STREMAH 99, 6th Int. Conf. on “Structural Studies, Repairs and Maintenance of Historical Buildings”, Vol. unico, Dresden 22-24 June 1999, 129-138 (L. Ippoliti). 53

18. Forced response of a SDOF friction oscillator colliding with a hysteretic obstacle. Proceedings of DETC’01 ASME 2001 Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Pitthsburgh, Pennsylvania, September 9-12, 2001, (P. Casini), Scopus: eid=2-s2.0-0035790845 60

19. A novel passive electric network analog to Kirchhoff-Love plate designed to efficiently damp forced vibrations by distributed piezoelectric tranducers Proc. SPIE, Vol. 5052, Smart Structures and Materials 2003: Damping and Isolation, pp. 380-381. Eds. Gregory S. Agnes; Kon-Well Wang, San Diego, CA. (S. Alessandroni, U. Andreaus. Fr. dell'lsola) 64

20. Nonlinear features in the dynamic response of a cracked beam under harmonic forcing, Proc. of DETC’05,2005 ASME International Design Engineering Technical Conferences and  Computers and Information in Engineering Conference, Long Beach, California, USA, September 24-28, 2005 (P. Casini, F. Vestroni), Volume 6 C, pp. 2083-2089. 70

21. Andreaus U., Colloca M. (2009). Risk of failure at the cement-enamel junction of a human premolar tooth. In: I Int. Conf. on Biodental Engineering. Porto, 26 and 27 of June 2009, Porto, Vol. 1, pp. 83-88, WOS: 000282776500014, ISBN: 978-0-415-57394-8, CRC PRESS-TAYLOR & FRANCIS GROUP, Porto, 2010. 78

22. Andreaus U., Colloca M., Iacoviello D. (2009). Damage detection in a human premolar tooth from image processing to finite element analysis. In: I Int. Conf. on Biodental Engineering. Porto, 26 and 27 of June 2009, Porto, Vol. 1, pp. 29-34, WOS: 000282776500005, ISBN: 9780415573948 , CRC PRESS-TAYLOR & FRANCIS GROUP, Porto, 2010. 79

23. Andreaus U., Colloca M., Iacoviello D., Pignataro M. Bone remodeling and topology optimization by PID control. GACM Colloquium on Computational Mechanics, 21-23 September 2009, Minisymposium on Computational bone mechanics, Leibniz Universität Hannover, Institut für Kontinuumsmechanik. 80

24. Campioni, U. Andreaus, A. Ventura, C. Giacomozzi. Hip Prostheses Computational Modeling: mechanical behavior of a femoral stem associated with different constraint materials and configurations. CompIMAGE 2012 - Computational Modeling of Objects Presented in Images: Fundamentals, Methods and Applications, 3rd edition, Rome, Italy, September 5-7, 2012. 96

25. Andreaus U., Scerrato Daria, Giorgio V., I. Giorgio. The influence of different geometries of matrix/scaffold on the response of a bone and resorbable material mixture with voids. 4th Canadian Conference on Nonlinear Solid Mechanics, CanCNSM2013, Montréal, Canada, July 23-26, 2013. 99

26. Andreaus U., Giorgio I., Placidi L., Rosi G., Models for remodelling in porous bone reconstructed tissues saturated with interstitial fluids, 4th Canadian Conference on Nonlinear Solid Mechanics, CanCNSM2013, Montréal, Canada, July 23-26, 2013. 100

27. Andreaus U., Placidi L., Rega G., Higher order eigenmodes in tapping mode atomic force microscopy, 4th Canadian Conference on Nonlinear Solid Mechanics, CanCNSM2013, Montréal, Canada, July 23-26, 2013. 101

28. Rega, G., Andreaus, U., Placidi, L., Settimi, V., Nonlinear dynamics of atomic force microscopy, Proc. of the Int. Conf. on Nonlinear Dynamics in Engineering: Modeling, Analysis and Applications, 20-23 August, Aberdeen, 53, 2013. 102

29. dell’Isola F., Giorgio I., Andreaus U., Elastic pantographic 2D lattices: a numerical analysis on static response and wave propagation, Proceedings of the Estonian Academy of Sciences 64(3):219-225 · August 2015, DOI: 10.3176/proc.2015.3.03. 111

30. Giorgio I., Andreaus U., Scerrato D., Biaxial bias extension test for pantographic sheets (2018),Shell Structures: Theory and Applications Volume 4 - Proceedings of the 11th International Conference on Shell Structures: Theory and Applications, SSTA 2017, pp. 93-96; Gdańsk; Poland; 11 October 2017 through 13 October 2017; Code 221159. doi: 10.1201/9781315166605-16, Scopus: 2-s2.0-85063919063, ISBN: 9781138050457, Ed.: CRC Press/Balkema.          131

31. Stefani, G., De Angelis, M., and Andreaus, U.: Experimental dynamic response of a SDOF oscillator constrained by two symmetrically arranged deformable and dissipative bumpers under harmonic base excitation. In: Nonlinear Dynamics and Control, eds. , W. Lacarbonara, B. Balachandran, J. Ma, J. A. Tenreiro Machado, G. Stepan, Proc. of the 1st Int. Nonlinear Dynamics Conf. (NODYCON 2019), Volume II, pp. 119-127, 17-20 February 2019, Roma, Italia, 10.1007/978-3-030-34747-5_12, WOS:000675494100012, Scopus 2-s2.0-85088398245               140

32. Stefani, Giulia; De Angelis, Maurizio; Andreaus, Ugo, Experimental and numerical investigation of base isolated SDOF system impact against bumpers under harmonic base excitation, COMPDYN 2019 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering. Proceedings Volume II, pp. 3333-3343, Crete; Greece, 24 - 26 June 2019, DOI: 10.7712/120119.7150.19207, Scopus: 2-s2.0-85079050104, ISBN: 978-618-82844-5-6          141

33. Stefani, G., De Angelis, M., Andreaus, U.: Experimental and numerical response analysis of a unilaterally constrained SDOF system under harmonic base excitation. Proc. XXIV Conf. Italian Association of Theoretical and Applied Mechanics, 15-19 September 2019, Roma, Italia, AIMETA2019 (2019) In: Carcaterra A., Paolone A., Graziani G. (eds). Proceedings of XXIV AIMETA Conference 2019. AIMETA 2019. Lecture Notes in Mechanical Engineering Springer, Cham, First Online 31 March 2020, DOI: 10.1007/978-3-030-41057-5_120.       142

34. Stefani, G., De Angelis, M., Andreaus, U. (2022). Preliminary Experimental Study on the Influence of the Gap in a Vibro-Impact System with Two-Sided Constraints. In: Lacarbonara, W., Balachandran, B., Leamy, M.J., Ma, J., Tenreiro Machado, J.A., Stepan, G. (eds) Advances in Nonlinear Dynamics. NODYCON Conference Proceedings Series. Springer, Cham. https://doi.org/10.1007/978-3-030-81166-2_28, Published 25 June 2021, Publisher Name Springer, Cham.           150

35. Optimal design of single-degree-of-freedom vibro-impact system under harmonic base excitation / Perna, Giuseppe; De Angelis, Maurizio; Andreaus, Ugo. - 26:(2023), pp. 429-434. (Intervento presentato al convegno 25th Conference of the Italian Association of Theoretical and Applied Mechanics, AIMETA 2022 tenutosi a Palermo; Italy) [10.21741/9781644902431-70].          151

36. Preliminary Numerical Analysis of the Response of Base-Isolated SDOF Systems Constrained by Two Deformable Devices Under Seismic Excitations / Perna, Giuseppe; De Angelis, Maurizio; Andreaus, Ugo. - (2023), pp. 948-965. (Intervento presentato al convegno 17WCSI tenutosi a Turin) [10.1007/978-3-031-21187-4_84].          152

37. Preliminary numerical analysis of the Vibro-Impact Isolation systems under seismic excitations / Perna, Giuseppe; DE ANGELIS, Maurizio; Andreaus, Ugo. - (2023). (Intervento presentato al convegno NODYCON2023 tenutosi a Rome; Italy).          153

38. 
    

Congressi nazionali (16)

1. Sul calcolo a rottura delle travi continue in presenza di carichi variabili, Atti VII CTA, Torino, ottobre 1979, “Ricerca teorica e sperimentale”, 33-50 (C. Gavarini). (in italian) 1

2. Sull’analisi limite elasto-plastica dei telai piani in acciaio, Atti VIII CTA, Palermo, ottobre 1981, “Ricerca teo­rica e sperimentale”, 21-32 (P. D’Asdia). (in italian) 7

3. Un modello per la rappresentazione di strutture dotate di vincoli interni non perfettamente bilaterali, Atti VI AIMeTA, Genova, 7-9 ottobre 1982, Sez. V, 302-311 (G. Ceradini, P. D’Asdia). (in italian) 8

4. Una proposta di modellazione dei legami costitutivi e dei domini di rottura delle murature, Atti II ASSIRCCO, Ferrara, 30 maggio-2 giugno 1984, 259-270 (G. Ceradini, P. D’Asdia, F. Iannozzi). (in italian) 14

5. Una proposta di modellazione del comportamento delle murature soggette ad azioni cicliche, Atti II ASSIRCCO, Ferrara, 30 maggio-2 giugno 1984, 271-276 (G. Ceradini, P. D’Asdia, F. Iannozzi). (in italian) 15

6. Un modello di elemento finito per l’analisi delle murature, Atti del Convegno nazionale “Stato dell’arte in Italia sulla mec­canica delle murature”, Roma, 14-15 ottobre 1985, 203-235 (P. D’Asdia). (in italian) 21

7. Aspetti dell’interazione fra muratura ed elementi metallici di rinforzo, Atti del Convegno nazionale “Stato dell’arte in Italia sulla meccanica delle murature”, Roma, 14-15 ottobre 1985, 237-267 (P. D’Asdia, A. Di Paolo). (in italian) 22

8. Analisi degli effetti di cedimenti di fondazione sulla resistenza alle forze orizzontali di pareti in muratura, Atti del Convegno nazionale “Stato dell’arte in Italia sulla meccanica delle murature”, Roma, 14-15 ottobre 1985, pagg. 269-297 (M. Cerone, P. D’Asdia). (in italian) 23

9. Analisi critica dei modelli per lo studio dinamico dei sistemi di conci a secco, Atti III ANIDIS, Roma, 30 settembre-2 ottobre 1987, I, 649-663 (A. Di Paolo). (in italian) 25

10. Sul comportamento dei giunti tra conci lapidei: un modello di giunto attritivo, Atti ANIDIS, Roma, 30 settembre-2 ottobre 1987, I, 665-690 (P. D’Asdia, A. Di Paolo). (in italian) 26

11. Analisi dinamica di blocchi lapidei su base attritiva, Atti 4º ANIDIS, Milano, 4-6 ottobre 1989, 2, 686-695. (in italian) 33

12. Meccanica delle colonne e delle costruzioni a blocchi lapidei: stato e prospettive degli studi, PACT, 32(7), 1991, 67-126 (G. Augusti). (in italian) 37

13. Numerical modelling of unreinforced masonry building, Proc. Italian Seminar on “Numerical Modelling of URM Buildings”, CNR-GNDT, Pavia, June 22th, 1994, pp. 6.1-6.13 (C. Gavarini et al.). 42

14. Andreaus U., Placidi L., Rega G. (2010). Dinamica di una mensola con impatti soffici: confronto del modello infinitodimensionale con quello equivalente ad un grado di libertà (sdof). In: Atti del XVIII Convegno Italiano di Meccanica Computazionale. Siracusa, 22 - 24 settembre 2010, Siracusa, Vol. 1, p. 1-10. 83

15. U. Andreaus, B. Chiaia, C. Cennamo, L. Placidi,  Dinamica di elementi non strutturali soggetti ad azione sismica, Atti del XIV Convegno ANIDIS “L’Ingegneria Sismica in Italia”, Bari, 18 - 22 Settembre 2011. 89

16. C. Giacomozzi, U. Andreaus, M. Rogante, I. Campioni (2012), Fatigue behaviour of artificial femoral stems: the role of Regulations and FE analysis. The National Congress of Italian Group of Bioengineering (GNB 2012), June 26-29, 2012, Rome. 95

Articoli in Libri (11)

1. Plasticità, Manuale dell’Ingegnere (Nuovo Colombo), Hoepli, Torino 1985, I(8), D130-141, (C.
   Gava­rini).

2. Mechanical behaviour of block-work structures: a brief review of experimental results and phenomenolo­gical aspects, “Omaggio a Giulio Ceradini”, 1988, 37-48. Mechanical behaviour of block-work structures: a brief review of experimental results and phenomenolo­gical aspects, “Omaggio a Giulio Ceradini”, 1988, 37-48. 30

3. Dynamic response of MDOF mechanical systems with contact and friction, Recent Research Development in Structural Dynamics, 2003, pp. 299-329, Editor: Angelo Luongo, Research Signpost, Kerala, India (P. Casini). 65

4. Multimodal vibration control by using piezoelectric transducers and passive circuits, Electro-Magneto-Mechanics of Advanced Material Systems and Structures, Editor: W. Shindo, WIT Press, pp. 307-317, 2003 (F. dell’Isola, M. Porfiri). 66

5. U. Andreaus, M. Colloca, D. Iacoviello, Modelling of trabecular architecture as result of an optimal control procedure. In: Biomedical Imaging and Computational Modeling in Biomechanics (eds. D. Iacoviello, U. Andreaus). Chapter II. Dordrecht, Springer. (2012) pp. 19-37, ISBN 940074269X, 9789400742697. 93

6. Campioni, G. Notarangelo, U. Andreaus, A. Ventura, C. Giacomozzi. Hip Prostheses Computational Modeling: FEM simulations integrated with fatigue mechanical tests. In: Biomedical Imaging and Computational Modeling in Biomechanics (eds. D. Iacoviello, U. Andreaus), Collana: Lecture Notes in Computational Vision and Biomechanics. Chapter V. Dordrecht, Springer. (2012) pp. 81-108. 94

7. dell'Isola F., Andreaus U., Placidi L., (2014). A still topical contribution of Gabrio Piola to Continuum Mechanics: the creation of peri-dynamics, non-local and higher gradient continuum mechanics. In: (a cura di): U. Andreaus, F. dell’Isola, R. Esposito, S. Forest, G. Maier, and U. Perego, The complete works of Gabrio Piola, Vol. I, Chapter 5. ADVANCED STRUCTURED MATERIALS Vol. 38, pp. 696-750, Springer, ISSN: 1869-8433, doi: 10.1007/978-3-319-00263-7_5. 111

8. Placidi L., Barchiesi E., Misra A., Andreaus U. (2018) Variational Methods in Continuum Damage and Fracture Mechanics. In: Altenbach H., Öchsner A. (eds) Encyclopedia of Continuum Mechanics. Springer, Berlin, Heidelberg
   DOI: 10.1007/978-3-662-53605-6_199-1, Online ISBN , 978-3-662-53605-1          127.

9. Andreaus U., Giorgio I. (2018) Variational Principles in Numerical Practice. In: Altenbach H., Öchsner A. (eds) Encyclopedia of Continuum Mechanics. Springer, Berlin, Heidelberg , DOI: 10.1007/978-3-662-53605-6, Online ISBN 978-3-662-53605-6        128.

10. Ivan Giorgio, Ugo Andreaus, Faris Alzahrani, Tasawar Hayat, Tomasz Lekszycki, A Diffusion Model for Stimulus Propagation in Remodeling Bone Tissues, Published in: Higher Gradient Materials and Related Generalized Continua, Advanced Structured Materials 120, H. Altenbach et al. (eds.), Springer International Publishing, https://doi.org/10.1007/978-3-030-30406-5_5          137

11. Andreaus U. (2019) Reflections on the Units and on the Measures of the Various Physical Quantities (Book Chapter). In: dell'Isola F. et al. (eds) The Complete Works of Gabrio Piola: Volume II. Advanced Structured Materials, vol 97, Pages 729-845. Springer, Cham. DOI: 10.1007/978-3-319-70692-4_5, Scopus: 2-s2.0-85054697043          135

Rapporti scientifici (6)

1. Analisi limite di telai piani in acciaio - Parte I: meccanismo e moltiplicatore di collasso al 1° ordine, Pubbl. II-313 ISC, Roma, 1980 (P. D’Asdia). (in italian) 2

2. Yield surfaces of steel cross-sections via Linear Programming, Pubbl. II-518 ISC, 1984 (P. D’Asdia). 17

3. Metodi di modellazione e di analisi nella meccanica delle strutture a blocchi lapidei, Studi e Ricerche (2), 1989, 1-77 (G. Augusti). (in italian) 35

4. Stato dell’arte sui legami costitutivi dei solidi murari, Studi e Ricerche (2), 1991, 1-75 (M. Maroder). 38

5. Stato dell’arte sui metodi di modellazione e di analisi statica dei solidi murari, Studi e Ricerche (3), 1991, 1-58 (A. Fatello). 39

6. C. Giacomozzi, U. Andreaus, G. Notarangelo, I. Campioni. Comportamento meccanico di steli protesici femorali: analisi con il metodo degli elementi finiti a supporto delle prove meccaniche a fatica. 2010, 73 p. Rapporti ISTISAN 10/11, ISSN 1123-3117. 84

Traduzioni (4)

1. dell’Isola F., Andreaus U., Cazzani A., Placidi L., (2014). Gabrio Piola’s Works translated into English: A tribute to a great. mathematical-physicist who participated to Italian Risorgimento (Resurgence), In: (a cura di): F. dell'Isola, G. Maier, U. Perego, U. Andreaus, R. Esposito, S. Forest, The complete works of Gabrio Piola, Vol. I, Chapter 0. ADVANCED STRUCTURED MATERIALS Vol. 38, pp. viii-x, Springer, ISSN: 1869-8433, doi ?. 107

2. dell’isola F. Andreaus U., Placidi L., Scerrato D.,(2014).  About the fundamental equations of the motion of bodies whatsoever, as considered following the natural their form and constitution. MEMOIR OF SIR DOCTOR GABRIO, In: (a cura di): U. Andreaus, F. dell’Isola, R. Esposito, S. Forest, G. Maier, and U. Perego, The complete works of Gabrio Piola, Vol. I, Chapter 1. ADVANCED STRUCTURED MATERIALS Vol. 38, pp. 1-370, Springer, ISSN: 1869-8433, 10.1007/978-3-319-00263-7_1. 108

3. dell'Isola F., Andreaus U., Cazzani A., Perego U., Placidi L., Ruta G., Scerrato D., (2014). On a debated principle of Lagrange analytical mechanics and on its multiple applications, In: (a cura di): U. Andreaus, F. dell’Isola, R. Esposito, S. Forest, G. Maier, and U. Perego, The complete works of Gabrio Piola, Vol. I, Chapter 2. ADVANCED STRUCTURED MATERIALS Vol. 38, pp. 371-590, Springer, ISSN: 1869-8433, 10.1007/978-3-319-00263-7_2. 109

4. dell'Isola F., Andreaus U., (2014). 1818 Discorso necrologico del Prof. Gabrio Piola. In: (a cura di): F. dell'Isola, G. Maier, U. Perego, U. Andreaus, R. Esposito, S. Forest, The complete works of Gabrio Piola, Vol. I, Chapter 3. ADVANCED STRUCTURED MATERIALS Vol. 38, pp. 592-604, Springer, ISSN: 1869-8433, doi: 10.1007/978-3-319-00263-7_3. 110