12/20

My final project is going to be a car. This car will be will made with 3d filament, cardboard (or wood), and stickers. The machines i'm going to be using are the 3d printer, laser cutter, and the venyl cutter. The base of the project is going to be created out of the 3d filament. The wheels will be made out of cardboard or wood. The designs on the car will be made out of stickers. I am doing this project alone, and all of the designs are being created from me. The wheels will be the only part of the car that will be made from cardboard or wood.

12/22

Today i finished finalizing my truck/car. I add a secret compartment and making the trunk of the car/truck able to open and close, making sure your money is safe.

1/2

Today i decided to smooth up my car and maybe get some of the wheels made. I decided to cut the bottom a little bit because the wheel holder was stick out too far for the car to actually move.

1/3

today i was about to 3d print the car, but all of the 3d printers were in use and already printing. So i had to do a few tweaks to my truck and wait for tomorrow.

1/4

Today i printed out my Truck, after that I waited for the car to print so i can get the measurements for the wheels and the stickers.

1/5

Today i finished my car building print and got it from the printer so i can receive my future measurements for the wheels. A piece of it broke off so i'm changing my project to a broken down car instead of a perfecto car

1/6

Today i started and finished creating the stickers for my truck

1/7

A piece of the the tire holder fell of and broke so i restarted the sticker process and made it zombie themed car

1/8

Today i finished creating the stickers and placing them on my truck. I added blood marks, glass, tarp, and light as sticker designs.

1/9

since i finished my car design i have been waiting for the laser cutter to be out of use by others. In saying i'm waiting to use the laser cutter.

1/10

Today i waited for the 3d printer to actually work this time, but it turns out it does not work at all. So i have been waiting for the large 3d printer to work.

1/11

Today the printers have not been working still and google sites is down, so today I was just waiting for the only printer to be working and in the main time I’m just figuring and making small change to my truck vitually

1/12

It's the same as yesterday, the only printer is being used, and the other 2 printers are broken.

How I Created The Abandon Car

1. First is went to solid works

2. Next i made a new file and focused on the front plane

3. I created the base of the car starting out as a rectangle. (3 by 6 inches)

4. I extrude it to 4 inches

5. Next to make the trunk of the truck i made a square a little more than half on the truck. I also made the height of the trunk exactly half of the cars height.

6. i made the trunks depth .10 inches deep.

7. Next i started working on the back window. I made it 0.50 in height and 3 inches in length

8. next i made the front window 3.5 in length and 1 inch in height.

9. Next i made the wheel holder

10. The measurements for that is: 1 inch in height and the radius is 0.55 inches for each

11. Next i made the poles that hold the tires

12. The measurements for them are; 4.5 in length and 0.44 inches in radius

13. for the stickers

14. I made the tarp for the trunk 4 inches length and height, I cut it down to perfect height after.

15. next i made the Blood stains: They were not measured.

16. next i made the front window: 3.5 in length and 1 inch in height

17. next i made the lights: For all they were 0.10 inches in height and 0.30 inches in length.

18. Finally i made the wheels, I made 6 wheels, i broke one of the tire holder to make it look more abandon and the reason i made 6 wheels is for 2 wheels on the right side (if your looking at it from the front). and 1 wheels on the left side and another wheel broken on the ground. The measurements for all wheels were 0.75 inches radius.

Final Product: