Embedded Files
The Band saw is a great woodworking tool in the shop. It is fairly easy to use and there is practically no risk of kick back. The Band saw can be used for making straight cuts but this can be difficult for a new user. The saw is better suited for making curved cuts. Note the size of the blade plays significant role in how sharp of a curve that can be cut. A band saw with a smaller blade can cut a much smaller radius that one with a lager blade. The most commonly used blade is 1/4" thick. The downfall of smaller blades is making a straight cut is more difficult. Severe accidents can happen when using equipment like this, being properly trained and supervised is very important. You should follow all safety protocols and your instructors rules / guidelines. Watch the video below to help you understand how to use and how a band saw works.
Band_Saw_Handout.docxLabel your image of the bandsaw with the following features:
Guide Post
Blade Tensioning Screw
Miter Gage Slot
Arm
Thrust Bearing
Guide Locking Screw
Table Insert
Switch
Work Lamp
Guide Post Locking Screw
Table
Blade
Blade Cover
Table Angle Scale
Blade Guides
Blade Slot
The blade runs through the two guides with about a 1/16th gap on each side. The teeth of the blade always point downward and are on the outside of the guides. The thrust bearing touches the back of the blade only when the piece of wood is pushed against the blade. Its normal for the bearing to move when bandsaw is in use. Otherwise, it sits still when running. Two adjustment knobs move the guide and the thrust bearing separately and horizontally and should be done by the instructor.
Common Courtesy - Clean up your wood scraps and drop the guide assembly. Dropping the guide assembly gives the next person an opportunity to properly adjust the guide above their work.
Inserts for Engineering Notebooks
Inserts for Engineering Notebooks
Bandsaw Image for NB.docxReport abuse