Embedded Files
first Step...lets start small and make a 2.5" medallion.
first Step...lets start small and make a 2.5" medallion.
- You can use AutoCAD, SolidWorks or Fusion360 to create the two-dimensional drawing.
- As you are designing follow the rules below:
Pathway Rules
Pathway Rules
● Use inches in your design and create an 2.5x2.5 inch area.
● Use inches in your design and create an 2.5x2.5 inch area.
● Make sure all stray lines and lines over other lines are deleted.
● Make sure all stray lines and lines over other lines are deleted.
● Make the hole in top of medallion .2".
● Make the hole in top of medallion .2".
Create a set of medallions that progress from start to finish.
Create a set of medallions that progress from start to finish.
Fusion360 TUtorial
Fusion360 TUtorial
Fusion360 to Plasma CNC.pdfimportant note - When you get your drawing into FUsion360, it will ask you about the post process. FOllow instructions below
important note - When you get your drawing into FUsion360, it will ask you about the post process. FOllow instructions below
Click to download the post processor
Post Process - FireControl-v1.6.cps
Post Processing Installation
1. Start Fusion.
2. Click Profile Name in the top-right corner -> Preferences.
3. Go to settings General -> Manufacture.
4. Make sure that Enable Cloud Libraries is activated.
5. Save the Preferences.
6. Navigate to Assets in the Data Panel.
7. Double-click the Assets -> CAMPosts folder to enter it.
8. Upload the required post processor from the local machine (link above) to the Assets -> CAMPosts folder.
9. Open a CAM design with a valid toolpath.
10. Go to menu Action -> Postprocess.
11. Select Setup -> Use Cloud Posts.
12. Select the post from the drop-down menu under Post Configuration.
Langmuir Crossfire Tutorials
Langmuir Crossfire Tutorials
AutoCAD designing
AutoCAD designing
FireControl
FireControl
Student Projects
Student Projects
fireshare
fireshare
Report abuse