Tips
SeaChangers are 1.5amps each, you can put 12 units on one 20amp power source
S4 Lustr2 are 1.94amps each, you can put 9 units on one 20amp power source
The SolaTheatre units are 7amps on 120v and 3amps on 220v
ColorForce 72 units are 6 amps and 120v
Rosco I-Cue uses 0.7amps
Rosco DMX Iris uses 500mA 100-240v
Atomic 3000 Strob only one unit to a 16 to 20 amp circuit.
VL LED300 Spot uses 3.5amp at 120v and 1.9amps at 220v
MAC Viper Performance uses 10.3 amps at 120v and 5.8amps at 208v
MAC Aura XB 3.2 amps at 120v
Auto-Yoke uses 1.3 amps and 120v
Unique Hazer uses 12.5 amps and 120v
Whenever possible avoid using a dimmer as a non-dim, but if necessary go to the dimmer rack and change the dimmer to a switch.
With wireless dimming make sure the antennas of both the transmitter and receiver are pointed in the same direction. When possible point them downward.
"Don't confuse a sexy spreadsheet with a viable plan". NWM
Lighting instruments should be no lower then 6'-8" over the audience or egress areas.
When using our stock LED tape keep in mind that they have been purchased at different times creating some color differences between tapes. If color matching is important for your project please test the tapes accordingly.
Voltage drop calculator - https://www.calculator.net/voltage-drop-calculator.html?material=copper&wiresize=5.211&voltage=220&phase=ac&noofconductor=1&distance=125&distanceunit=feet&eres=12&x=50&y=31
"Nobody cares what you are doing until you get in their way". Luanne Jubsee DGSD'24