Scooter Stuff - LED Flasher Relay

LED Flasher Relay - $20.00

Available for Genuine Buddy 50/125/150/170i or Icebear Maddog scooters.

The stock flasher relay on most scooters only works with incandescent bulbs.  If you decide to upgrade to LED bulbs in the front or the rear of your scooter, the turn signals will blink at twice the normal speed.  If you upgrade to LED bulbs in the front and rear of your scooter, the stock flasher relay doesn't work at all.  

Installing an electronic flasher relay will allow you to run all LED bulbs or a combination of LED's and stock incandescent bulbs while retaining the proper flash rate.

Completely waterproof and rated to power up to 200W, this flasher relay can handle just about any combination of bulbs you would be likely to install on your scooter.

Installation takes about 5 minutes and only requires a Phillips screwdriver.  Each relay is individually tested to be a plug and play replacement for the stock flasher.  

Electronic flasher relays do not make a loud clicking sound like the stock flasher.  You will have to rely on the indicator light on the instrument cluster to remind you to turn the signals off after you make your turn.

To mount the relay use the included zip tie to secure the flasher into the the stock rubber mount.

$20.00 includes shipping via First Class Mail in the US.  International shipping is not currently available.

Be sure to choose the right flasher for your scooter.  The wiring is different and won't be plug and play if you order the wrong one.