setupsipbroker

Setup Sipbroker

Setup an account with Sipbroker. Your UserID should be the extension number of your main phone @ then your domain or IP Address. Format: 123456@yourprovider.com

Copy down the " *+four digit routing code".

Make sure that your system can Allow Anonymous Inbound SIP Calls. That can be checked out by logging into your system, goto PBX Settings, then the General Settings on the left of the screen.

Now you can set up extension numbers and then route the calls.

I have Phunfone tapes running when you call one of the Sipbroker PSTN Gateway Numbers, dial *9339-4936. You will get a dialtone. Next dial a three digit number corresponding to the Phunfone tape from 002 to 125.

The way I set that up was to go to Inbound Routes on the left side of the screen of your FreePBX screen. Next Add Incoming Route. Enter the Description and DID Number of your choosing. Last is to set the Destination which is at the bottom of the screen.

That's it........

When you call in and dial your * + 4-digit number plus the DID number of your choosing, it will go to the destination that you picked.

RonaldGibson@Gmail.com

This site is protected by copyright and trademark laws

under U.S. and international law.