Embedded Files
DIY - KIT
Digital LCD Frequency Counter - Electronic Dial.
For the Atlas 210x, 215x and others models with the same characteristics*.
Frequency range: 1MHz to 35MHz, frequency resolution 10Hz.
IMPORTANT INFORMATION!
Please, observe in your radio the Intermediate Frequency (IF)!
There are some models ( first production serial ) with 5520kHz and the late serial with 5645kHz!
It is important to know, to programing the correct code at MCU!
All inside crystal oscillators of the radio, must be calibrated!
LCD 1602
LCD 0802
FUNCTION DESCRIPTION:
The counter measure the VFO frequency.
The counter display the frequency with OFFSET (+/- IF).
The 2 position toggle switch, select the OFFSET:
LSB - for the 160m*, 80m and 40m band and USB for the 20m to 10m band.
NO "REVERSE SIDE BAND" OPERATION FOR THIS COUNTER!
DC power can be from the rear panel 9pin (NOVAL) socket of the Atlas 210x or 215x*.
Instead the DC power from the NOVAL socket, can be used too the 13V LO AMPS!
Please, see the wire schematic at pictures.
Details for the wire schematic below!
Counter with LCD 1602
Counter with LCD 0802
All inside crystal oscillators of the radio, must be calibrated!
DIY KIT - For the Digital LCD Frequency Counter Dial.
For the Atlas 210-x or Atlas 215-x
Kit with LCD 1602.
Parts are composed by:
9Pin Plug ( NOVAL )
LCD 1602 module
1 x 16Pin Socket ( Board Header Socket )
2 x 16Pin Pin ( LCD PIN Header )
Toggle Switch
KF2510-5P Housing
2 x KF2510-2P Housing
9 x KF2510 Terminal
Nylon Screw Kit 16pcs (Black)
Programed Counter Board (1602)
Kit with LCD 0802.
Parts are composed by:
9Pin Plug ( NOVAL )
LCD 0802 module
2 x 7Pin Socket ( Board Header Socket )
2 x 7Pin Pin ( LCD PIN Header )
Toggle Switch
KF2510-5P Housing
2 x KF2510-2P Housing
9 x KF2510 Terminal
Nylon Screw Kit 12pcs (Black)
Programed Counter Board (0802)
ATTENTION!
THE ABS PLASTIC BOX IS NOT INCLUDED!
The picture is showed for reference only!
NONE WIRES OR CABLES ARE INCLUDED!
Costs:
Retail Price = US$68.00
Shipping cost:
USA and Canada = US$9.50
Europe = US$10.50
Japan and Australia = US$12.00
Please, add US$2.50 for additional shipping cost for each counter kit.
*IMPORTANT INFORMATION!
Please, observe in your radio the Intermediate Frequency!
There are some models ( first production serial ) with 5520kHz and the late serial with 5645kHz!
It is important to know, to do the correct MCU programming.
All inside crystal oscillators of the radio, must be calibrated!
Counter with LCD 0802
Page updated
Google Sites
Report abuse