Publications in Academic Journals
Jongchan Won, Taewan Kim, Yongcheol Choi, Seongwon Kang 2023 “An analysis on Pigford model for a liquid film developing over a rotating disk”, Submitted.
원종찬, 김태완, 박진규, 강성원 2023 “고해상도 시뮬레이션 기반 회전 원판 위 액막 불안정성 발생 위치에 대한 무차원화 분석”, 한국전산유체공학회지, Accepted.
Mathis Bode, Abhishek Deshmukh, Tobias Falkenstein, Seongwon Kang, Heinz Pitsch 2023 “Hybrid scheme for complex flows on staggered grids and application to multiphase flows“, Journal of Computational Physics, Vol. 474, 108478. https://doi.org/10.1016/j.jcp.2018.12.041
오창종, 김태완, 윤보경, 정진욱, 강성원 2023 “원심 펌프의 임펠러에 대한 혹등고래 결절 형상 적용 및 최적화”, 한국전산유체공학회지, Vol. 28, No. 1, pp. 35-43.
Young Keon Gong, Hyungrok Do, Gilbong Lee, Seongwon Kang 2022 “Modeling swirl evolution inside annular nozzles under compressible effect”, AIAA Journal, Vol. 60, No. 10, pp. 5907-5922. https://doi.org/10.2514/1.J061532
Kyeongchan Keum, Youchan Park, Hakseon Lee, Sungho Chang, Hyungrok Do, Dae Keun Lee, Seongwon Kang 2022 “Large eddy simulation of turbulent partially premixed flames in oxy-fuel combustor under subcritical and supercritical conditions”, Journal of Mechanical Science and Technology, Vol. 36, pp. 1825-1834. https://link.springer.com/article/10.1007/s12206-022-0319-z
하강우, 윤현근, 남상혁, 김영재, 강성원 2021 “난류 유동에서 다변수 인자에 대한 기계 학습 기법 비교 연구”, 한국전산유체공학회지, Vol. 26, No. 1, pp. 94-103.
홍시형, 최종락, 허남건, 강성원 2021 “혈액펌프에서 멱법칙 모델과 점탄성 모델을 이용한 용혈 예측”, 한국전산유체공학회지, Vol. 26, No. 3, pp. 81-89.
Hyunjae Kim, Young Keon Gong, Jaehoon Choi, Hyungrok Do, Gilbong Lee, Seongwon Kang 2021 “On primary parameters of swirl decay rate in turbulent swirling flows inside annular pipe”, AIAA Journal, Vol. 59, No. 12, pp. 5251-5265. https://doi.org/10.2514/1.J060156
Tobias Falkenstein, Marco Davidovic, Antonio Attili, Mathis Bode, Hongchao Chu, Seongwon Kang, Heinz Pitsch, Hiroyoshi Taniguchi 2020 “LES Modeling Study on Cycle-to-Cycle Variations in a DISI Engine”, SAE Technical Paper 2020-01-0242, https://doi.org/10.4271/2020-01-0242.
Tobias Falkenstein, Aleksandra Rezchikova, Raymond Langer, Mathis Bode, Seongwon Kang, Heinz Pitsch 2020 “The Role of Differential Diffusion during Early Flame Kernel Development under Engine Conditions - Part I: Analysis of the Heat-Release-Rate Response”, Combustion and Flame, Vol. 221, pp. 502-515. https://doi.org/10.1016/j.combustflame.2020.06.004
Tobias Falkenstein, Hongchao Chu, Mathis Bode, Seongwon Kang, Heinz Pitsch 2020 “The Role of Differential Diffusion during Early Flame Kernel Development under Engine Conditions - Part II: Effect of Flame Structure and Geometry”, Combustion and Flame, Vol. 221, pp. 516-529. https://doi.org/10.1016/j.combustflame.2020.06.002
Tobias Falkenstein, Marco Davidovic, Antonio Attili, Mathis Bode, Hongchao Chu, Seongwon Kang, Heinz Pitsch, Hiroyoshi Taniguchi 2020 “Experiments and Large-Eddy Simulation for a Flowbench Configuration of the Darmstadt Optical Engine Geometry”, SAE International Journal of Engines 13(4), https://doi.org/10.4271/03-13-04-0032.
Tobias Falkenstein, Seongwon Kang, Liming Cai, Mathis Bode, Heinz Pitsch 2020 “DNS study of the global heat release rate during early flame kernel development under engine conditions”, Combustion and Flame, Vol. 213, pp. 455-466. https://doi.org/10.1016/j.combustflame.2019.11.031
Hokyo Jung, Serin Yoon, Youngjae Kim, Jun Ho Lee, Hyungmin Park, Dongjoo Kim, Jungwoo Kim, Seongwon Kang 2020 “Development and evaluation of data-driven modeling for bubble size in turbulent air-water bubbly flows using artificial multi-layer neural networks”, Chemical Engineering Science, Vol. 213, 115357. https://doi.org/10.1016/j.ces.2019.115357
Tobias Falkenstein, Seongwon Kang, Heinz Pitsch 2020 “Analysis of premixed flame kernel/turbulence interactions under engine conditions based on direct numerical simulation data”, Journal of Fluid Mechanics, Vol. 885, A32-1. https://doi.org/10.1017/jfm.2019.995
김두승, 이승헌, 박병훈, 강성원 2019 “수직 충격파 이론을 이용한 레이저 절단용 초음속 보조 가스의 효과 분석”, 대한기계학회논문집 B권, Vol. 43, No. 4, pp. 231-239.
Eunbeom Jung, Wook Lee, Taeksoo Kim, Seongwon Kang 2019 “An analysis of turbulent Prandtl number in a flow under local acceleration and deceleration”, Submitted.
Wook Lee, Eunbeom Jung, Seongwon Kang, Nahmkeon Hur 2019 “On a momentum interpolation scheme for collocated meshes with improved discrete kinetic energy conservation”, Journal of Mechanical Science and Technology, Vol. 33 (6), pp. 2761-2768. https://doi.org/10.1007/s12206-019-0522-8
Seunghun Lee, Youngmoon Cho, Seongwon Kang, Nahmkeon Hur, Wonjung Kim 2019 “Evaluation of an extended viscoelastic model to predict hemolysis in cannulas and blood pumps”, Journal of Mechanical Science and Technology, Vol. 33 (5), pp. 2181-2188. https://doi.org/10.1007/s12206-019-0420-0
Sima Farazi, Antonio Attili, Seongwon Kang, Heinz Pitsch 2019 “Numerical study of coal particle ignition in air and oxy-atmosphere”, Proceedings of The Combustion Institute, Vol. 37, pp. 2867-2874. https://doi.org/10.1016/j.proci.2018.07.002
Sima Farazi, Jörn Hinrichs, Marco Davidovic, Tobias Falkenstein, Mathis Bode, Seongwon Kang, Antonio Attili, Heinz Pitsch 2019 “Numerical investigation of coal particle stream ignition in oxy-atmosphere”, Fuel, Vol. 241, pp. 477–487. https://doi.org/10.1016/j.fuel.2018.11.108
Jaehoon Choi, Eunbeom Jung, Seongwon Kang, Hyungrok Do 2018 “Modeling swirl decay rate of turbulent flows in annular swirl injectors”, AIAA Journal, Vol. 56, pp. 4910-4926. https://doi.org/10.2514/1.J057236
Taraneh Sayadi, Sima Farazi, Seongwon Kang, Heinz Pitsch 2017 “Transient multiple particle simulations of char particle combustion”, Fuel, Vol. 199, pp. 289–298. https://doi.org/10.1016/j.fuel.2017.02.096
Tobias Falkenstein, Seongwon Kang, Marco Davidovic, Mathis Bode, Heinz Pitsch, Toshihiro Kamatsuchi, Junji Nagao and Toshiyuki Arima 2017 “LES of internal combustion engine flows using cartesian overset grids”, Oil & Gas Science and Technology, Vol. 72, pp. 36-57. https://doi.org/10.2516/ogst/2017026
Marco Davidovic, Tobias Falkenstein, Mathis Bode, Liming Cai, Seongwon Kang, Jörn Hinrichs and Heinz Pitsch 2017 “LES of n-Dodecane spray combustion using a multiple representative interactive flamelets model”, Oil & Gas Science and Technology, Vol. 72, pp. 29-41. https://doi.org/10.2516/ogst/2017019
Sima Farazi, Mohsen Sadr, Seongwon Kang, Martin Schiemann, Nikita Vorobiev, Viktor Scherer, Heinz Pitsch 2017 “Resolved simulations of single char particle combustion in a laminar flow field”, Fuel, Vol. 201, pp. 15-28. https://doi.org/10.1016/j.fuel.2016.11.011
김성길, 홍석빈, 김태홍, 김원정, 강성원, 강신형, 허남건 2016 “혈액펌프 성능평가를 위한 실험장치 구성”, 한국유체기계학회 논문집, Vol. 19, No. 6, pp. 55-60.
최신화, 허남건, M. Moshfeghi, 김원정, 강성원, 강신형 2016 “수치해석을 통한 ECMO용 원심형 혈액 펌프 설계”, 한국전산유체공학회지, Vol. 21, No. 1, pp. 103-109.
Philipp Trisjono, Seongwon Kang, Heinz Pitsch 2016 “On a consistent high-order finite difference scheme with kinetic energy conservation for simulating turbulent reacting flows”, Journal of Computational Physics, Vol. 327, pp. 612-628. https://doi.org/10.1016/j.jcp.2016.09.052
홍성민, 손창근, 강성원, 허남건, 김원정, 강신형 2015 “혈액펌프내 혈액 변성 예측에 대한 Lagrangian 및 Eulerian 기법의 평가”, 한국전산유체공학회지, Vol. 20, No. 3, pp. 79-86.
장민욱, M. Moshfeghi, 허남건, 강성원, 김원정, 강신형 2015 “혈액 펌프의 기계적 성능과 생체 역학적 성능에 대한 연구”, 한국전산유체공학회지, Vol. 20, No. 2, pp. 88-95.
Benoit Fiorina, Renaud Mercier, Guido Kuenne, Anja Ketelheun, Amer Avdic, Johannes Janicka, Dirk Geyer, Andreas Dreizler, Emma Alenius, Christophe Duwig, Philip Trisjono, Konstantin Kleinheinz, Seongwon Kang, Heinz Pitsch, Fabian Proch, Fabrizio Cavallo Marincola, Andreas Kempf 2015 "Challenging modeling strategies for LES of non-adiabatic turbulent stratified combustion", Combustion and Flame, Vol. 162, pp. 4264-4282. https://doi.org/10.1016/j.combustflame.2015.07.036
Sungmin Hong, Wook Lee, Seongwon Kang, Han Ho Song 2015 “Analysis of turbulent diffusion flames with a hybrid fuel of methane and hydrogen in high pressure and temperature conditions using LES approach”, International Journal of Hydrogen Energy, Vol. 40, No. 35, pp. 12034-12046. https://doi.org/10.1016/j.ijhydene.2015.05.081
Sungmin Hong, Wook Lee, Seongwon Kang, Han Ho Song 2015 “Investigation of unsteady phenomena in turbulent diffusion flames with hybrid fuel of methane and hydrogen in high pressure and temperature conditions”, International Journal of Hydrogen Energy, Vol. 40, No. 35, pp. 11730-11739. https://doi.org/10.1016/j.ijhydene.2015.05.130
Jungwoo Kim, Eunbum Jung, Seongwon Kang 2015 “Large eddy simulation of hydrogen dispersion from leakage in a nuclear containment model”, International Journal of Hydrogen Energy, Vol. 40, No. 35, pp. 11762-11770. https://doi.org/10.1016/j.ijhydene.2015.04.156
Mathis Bode, Tobias Falkenstein, Vincent Le Chenadec, Seongwon Kang, Heinz Pitsch, Toshiyuki Arima, Hiroyoshi Taniguchi 2015 "A new Euler/Lagrange approach for multiphase simulations of a multi-hole GDI injector", SAE Technical Paper, 2015-01-0949. https://doi.org/10.4271/2015-01-0949
Tobias Falkenstein, Mathis Bode, Seongwon Kang, Heinz Pitsch, Toshiyuki Arima, Hiroyoshi Taniguchi 2015 “Large-eddy simulation study on unsteady effects in a statistically stationary SI engine port flow”, SAE Technical Paper, 2015-01-0373. https://doi.org/10.4271/2015-01-0373
Varun Mittal, Seongwon Kang, Eric Doran, David Cook, Heinz Pitsch 2014 “LES of gas exchange in IC engines”, Oil & Gas Science and Technology, Vol. 69, pp. 29-40. https://doi.org/10.2516/ogst/2013122
Sang Hyuk Lee, Nahmkeon Hur, Seongwon Kang 2014 “An efficient method to predict the heat transfer performance of louver fin radiator in automotive power system”, Journal of Mechanical Science and Technology, Vol. 28, pp. 145-155. https://doi.org/10.1007/s12206-013-0951-8
Philipp Trisjono, Konstantin Kleinheinz, Seongwon Kang, Heinz Pitsch 2014 “Large eddy simulation of stratified and sheared flames of a premixed turbulent stratified flame burner using a flamelet model with heat loss”, Flow, Turbulence and Combustion, Vol. 92, pp. 201-235. https://doi.org/10.1007/s10494-013-9522-4
Seongwon Kang, Sang Hyuk Lee, Nahmkeon Hur 2013 “An accurate and efficient method for automatic deformation of unstructured polyhedral grids to simulate the flow induced by the motion of solid objects”, Progress in Computational Fluid Dynamics, Vol. 13, No. 3/4, pp. 182-190. https://doi.org/10.1504/PCFD.2013.053659
Jongrak Choi, Nahmkeon Hur, Seongwon Kang, Eun Dok Lee, Kwang-Bum Lee 2013 “A CFD simulation of hydrogen dispersion for the hydrogen leakage from a fuel cell vehicle in an underground parking garage”, International Journal of Hydrogen Energy, Vol. 19, No. 38, pp. 8084-8091. https://doi.org/10.1016/j.ijhydene.2013.02.018
Seongwon Kang 2013 “On stable simulation for compressible flows with reduced artificial stabilization”, Journal of Computational and Theoretical Nanoscience, Vol. 8, No. 10, pp. 1824-1830. https://doi.org/10.1166/jctn.2013.3134
Linan Zhang, Seongwon Kang, Dongchoul Kim 2013 “Molecular dynamics simulation of the interface energy of cell membrane”, Journal of Computational and Theoretical Nanoscience, Vol. 10, No. 10, pp. 1859-1862. https://doi.org/10.1166/jctn.2013.3139
Kilsung Kwon, Ho Kang, Seongwon Kang, Daejoong Kim 2013 “Evaluation of reciprocating electromagnetic air pumping for portable PEMFC”, Journal of Micromechanics and Microengineering, Vol. 6, No. 23, pp. 65007. https://doi.org/10.1088/0960-1317/23/6/065007
Seongwon Kang, Heinz Pitsch, Nahmkeon Hur 2013 “On a robust ALE method with discrete primary and secondary conservation”, Journal of Computational Physics, Vol. 254, pp. 1-7. https://doi.org/10.1016/j.jcp.2013.07.012
민윤홍, 강성원, 허남건, 이창훈, 박정택 2012 “에어컨 실내기의 공력소음 예측을 위한 RANS 난류모델의 성능 평가”, 한국전산유체공학회지, Vol. 17, No. 4, pp. 81-86.
Sang Hyuk Lee, Seongwon Kang, Nahmkeon Hur, Seul-Ki Jeong 2012 "A fluid-structure interaction analysis on hemodynamics in carotid artery based on patient-specific clinical data", Journal of Mechanical Science and Technology, Vol. 26, pp. 3821-3831. https://doi.org/10.1007/s12206-012-1008-0
Linan Zhang, Seongwon Kang, Dongchoul Kim 2012 “Computational analysis of the effects of matrix-degrading enzymes on cancer-cell invasion”, Journal of Applied Physics, Vol. 112, pp. 124704.
Jae Hyuk Jung, Seongwon Kang, Nahmkeon Hur 2011 "A numerical study of a torque converter with various methods for the accuracy improvement of performance prediction", Progress in Computational Fluid Dynamics, Vol. 11, No. 3/4, pp. 236-243.
Sang Hyuk Lee, Nahmkeon Hur, Seongwon Kang 2011 “A numerical analysis of a drop impact on the liquid film by using a level set method”, Journal of Mechanical Science and Technology, Vol. 25, pp. 2567-2572.
Seongwon Kang, Gianluca Iaccarino, Frank Ham 2009 “DNS of buoyancy-dominated turbulent flows on a bluff body using the immersed boundary method”, Journal of Computational Physics, Vol. 228, pp. 3189-3208.
Seongwon Kang, Gianluca Iaccarino, Frank Ham, Parviz Moin 2009 “Prediction of wall-pressure fluctuation in turbulent flows with an immersed boundary method”, Journal of Computational Physics, Vol. 228, pp. 6753-6772.
Seongwon Kang, Gianluca Iaccarino, Parviz Moin 2009 “Accurate immersed-boundary reconstructions for viscous flow simulations”, AIAA Journal, Vol. 47, No. 7, pp. 1750-1760.
Seongwon Kang, Haecheon Choi 2002 “Suboptimal feedback control of turbulent flow over a backward-facing step”, Journal of Fluid Mechanics, Vol. 463, pp. 201-227.
Proceedings of International Conferences
2019 Nov. “A data-driven approach to simulate turbulent bubbly flows using machine learning for modeling bubble size” American Physics Society DFD Conference 2019, Seattle, USA.
2019 Aug. “Analysis of turbulent swirling flows in straight annular pipe using an ODE-based model for swirl decay rate” ASME-JSME-KSME Joint Fluids Engineering Conference 2019, San Francisco, USA.
2019 Aug. “On developing a system model for water recovery device with hollow fiber cartridges in a cooling tower” ASME-JSME-KSME Joint Fluids Engineering Conference 2019, San Francisco, USA.
2019 Aug. “Data-based modeling of local bubble size in turbulent bubbly flows inside pipes” ASME-JSME-KSME Joint Fluids Engineering Conference 2019, San Francisco, USA.
2018 Nov. “Development of 1-D model for swirl decay rate inside annular swirl injectors” American Physics Society DFD Conference 2018, Atlanta, USA.
2017 Nov. “Evaluation of particle-based flow characteristics using novel Eulerian indices” American Physics Society DFD Conference 2017, Denver, USA.
2017 Nov. “A revised NOMANI model for NO prediction using improved mechanism indicator” American Physics Society DFD Conference 2017, Denver, USA.
2017 Nov. “On a turbulent wall model to predict hemolysis numerically in medical devices” American Physics Society DFD Conference 2017, Denver, USA.
2017 May. “Analysis of nox production from a turbulent diffusion flame with a methane and hydrogen fuel” The 10th. International Conference on Computational Heat, Mass and Momentum Transfer, Seoul, Korea.
2017 May. “On a turbulent wall model for hemolysis in hemodynamic flows” The 10th. International Conference on Computational Heat, Mass and Momentum Transfer, Seoul, Korea.
2017 May. “Analysis of flow charateristics with novel Eulerian indices in complex flows” The 10th. International Conference on Computational Heat, Mass and Momentum Transfer, Seoul, Korea.
2016 Nov. “Investigation of turbulent Prandtl number subject to local acceleration and deceleration” American Physics Society DFD Conference 2016, Portland, USA.
2016 Jun. S. Choi, N. Hur, M. Moshfeghi, S. Kang, W. Kim, “Development of a Centrifugal Blood Pump for ECMO and VAD Operations” ECCOMAS Comgress 2016, Paper No. 8642, Crete, Creece.
2016 Jul. N. Hur, S. Choi, M. Chang, S.-G. Kim, S. Hong, M. Moshfeghi, W. Kim, S. Kang, S.H. Kang, ”Development of a Centrifugal Blood Pump for ECMO and LVAD Operations” ASME 2016 Fluids Engineering Division Summer Meeting, Paper No. FEDSM2016-7938, Washington, DC, USA.
2015 Nov. “On effects of background pressure and temperature on turbulent non-premixed flame with methane and hydrogen” The Asian Symposium on Computational Heat Transfer and Fluid Flow 2011, Busan, Korea.
2015 Nov. “An analysis of spatially varying turbulent Prandtl number in a flow with local acceleration and deceleration” American Physics Society DFD Conference 2015, Boston, USA.
2015 Nov. “A suboptimal feedback control theory based on a quadratic sensitivity and tabulation approach” American Physics Society DFD Conference 2015, Boston, USA.
2015 “An analysis of hydrogen dispersion from leakage in nuclear containment using large eddy simulation” ASME-JSME-KSME Joint Fluids Engineering Conference 2015.
2015 “On a new systematic feedback control theory based on suboptimal control approach” ASME-JSME-KSME Joint Fluids Engineering Conference 2015.
2015 “Large-eddy simulation and modeling of turbulent flows around a fin-tube heat exchanger inside a compartment” ASME-JSME-KSME Joint Fluids Engineering Conference 2015.
2015 “Evaluation of Lagrangian and Eulerian approaches for prediction of hemolysis in blood pumps” The 3rd. International Symposium on Cardiovascular Imaging and Hemodynamic Simulations.
2014 “Large-eddy simulation of turbulent flows around a fin-tube heat exchanger enclosed by a compartment” American Physics Society DFD Conference 2014.
2014 “Large eddy simulation of turbulent diffusion flame with hybrid fuel of CH4/H2 in various background conditions” American Physics Society DFD Conference 2014.
2014 “An Analysis of Turbulent Flow and Heat Transfer Phenomena around a Fin-Tube Heat Exchanger using Large-Eddy Simulation and Porous Media Model” The 10th. Asian Computational Fluid Dynamics Conference.
2014 “Simulation of Turbulent Diffusion Flame with Methane and Hydrogen Hybrid Fuel in Various Background Conditions using a LES Approach” The 10th. Asian Computational Fluid Dynamics Conference.
2014 “Analysis of Turbulent Diffusion Flames with Methane and Hydrogen in Various Background Conditions using LES Approach” The 20th. World Hydrogen Energy Conference.
2014 “An Analysis of Hydrogen Dispersion from Leakage in Nuclear Containment using Large Eddy Simulation” The 20th. World Hydrogen Energy Conference.
2013 “Improved Accuracy and Stability with NUFLEX - a Flow Solver for Unstructured Meshes with Arbitrary Shapes” Japan-Korea CFD Workshop 2013.
2013 “Analysis of Flow Characteristics for Viscosity Sensing Applications of Suspended Microchannel Resonators” American Physics Society DFD Conference 2013.
2013 “Visualization of 3D Flow Field around Fin Tube Heat Exchanger using Magnetic Resonance Velocimetry and Comparison with RANS and LES” The 9th. Pacific Symposium on Flow Visualization and Image Processing.
2012 “On a Robust ALE Method with the Discrete Primary and Secondary Conservation Properties” American Physics Society DFD Conference 2012.
2012 “Effect of Turbulence Models on the Flow Field of Cross-Flow Fan” Turbulence, Heat and Mass Transfer 2012.
2012 “Large-Eddy Simulation of the Darmstadt TSF Burner” Turbulence, Heat and Mass Transfer 2012.
2012 “A Numerical Analysis on the Aerodynamic Noise of Cross-Flow Fan by using URANS and Acoustic Analogy” FAN 2012.
2012 “An Approach on Fluid-Structure Interaction for Hemodynamics of Carotid Arteries” ASME 2012 Fluids Engineering Summer Meeting.
2012 “A Fluid-Structure Interaction Analysis on Hemodynamics in the Simplified Pseudoaneurysm Model” The 5th. International Symposium on Fluid Machinery and Fluids Engineering.
2012 “Development of a Finite Volume Method using Polyhedral Meshes for Accurate CFD Simulations” The 5th. International Symposium on Fluid Machinery and Fluids Engineering.
2012 “Development and Analysis of an Improved Finite Volume Method for Polyhedral Meshes” The 7th. International Conference on Computational Fluid Dynamics.
2012 “On Practical Implementation of Immersed Boundary Method for Complex Engineering Applications” The Eighth KSME-JSME Thermal and Fluid Engineering Conference.
2012 “Prediction of Broadband Noise from a Cross-Flow Fan using Detached-Eddy Simulation and Acoustic Analogy” The Eighth KSME-JSME Thermal and Fluid Engineering Conference.
2012 “Development of a Program for Simulating Fluid-Structure Interaction and its Application to Blood Flow inside a Compliant Artery” The Eighth KSME-JSME Thermal and Fluid Engineering Conference.
2012 “Large Eddy Simulation of Gas Exchange in IC Engines” Symposium on LES for IC Engines.
2011 “Analysis of Turbulent Prandtl Number around a Heated Cylinder” The 5th. Korea-Japan Joint Seminar on Heat Transfer.
2011 “DNS of Conjugate Heat Transfer Phenomena with an Improved IB Method” ASME-JSME-KSME Joint Fluids Engineering Conference 2011.
2011 “A Numerical Simulation of Hydrogen Diffusion for the Hydrogen Leakage from a Fuel Cell Vehicle in an Underground Parking Garage” International Conference on Hydrogen Safety.
2011 “A Numerical Analysis on the Flow Noise of the Cross Flow Fan in an Air Conditioner Indoor Unit” The Asian Symposium on Computational Heat Transfer and Fluid Flow - 2011.
2011 “Development of a CFD Program Based on an Unstructured Polyhedral Grid and its Application to Flow around an Oscillating Circular Cylinder” The Asian Symposium on Computational Heat Transfer and Fluid Flow - 2011.
2011 “Fluid-Structure Interaction Approach on Hemodynamics of Carotid Artery” International Colloquium on Multiscale Fluids Engineering.
2011 “Numerical Prediction of the Flow Noise due to a Cross-Flow Fan using CFD Simulation and Acoustic Analogy” International Colloquium on Multiscale Fluids Engineering.
2011 “Fluid-Structure Interaction Approach on Hemodynamics of Carotid Artery” Japan-Korea CFD Workshop 2011 in 25th. Symposium of Computational Fluid Dynamics.
2009 “Application of Immersed Boundary Technique for Large Eddy Simulation of IC Engine Processes” Academy Colloquium on Immersed Boundary Methods Hosted by Euromech and Ercoftac.
2009 “Prediction of Pressure Fluctuations in Turbulent Flows using the Immersed Boundary Method” American Physics Society DFD Conference 2009.
2008 “High-fidelity Simulations of Turbulent Heat Transfer on Bluff Bodies” The 5th. European Congress on Computational Methods in Applied Sciences and Engineering (Keynote lecture by prof. G. Iaccarino).
2006 “Effect of Discontinuous Filters on LES” American Physics Society DFD Conference 2006.
2005 “Predicting Pressure Fluctuations In Large Eddy Simulations using the Immersed Boundary Method” American Physics Society DFD Conference 2005.
2004 “Accuracy of the Boundary Treatment in Immersed Boundary Methods” American Physics Society DFD Conference 2004.
2001 “Quasi-random Phase Control for Mixing Enhancement” American Physics Society DFD Conference 2001.
1999 “Suboptimal Feedback Control of Turbulent Flow over a Backward-Facing Step” American Physics Society DFD Conference 1999.