M. Kiuchi,R.Q. Hsu,
“Prediction of Drawing Limits and Dimension of Drawn Eccentric Clad Rods and Wires and Wires”,
Drawing of Non-Axisymmetric Composites-Journal of the JSTP,
vol. 30(1989),
p.1516-1523.
M. Kiuchi,R.Q. Hsu,
“Numerical Simulation of Drawing of Multi-core Clad Rods”,
Drawing of Non-Axisymmetric Composites-Journal of the JSTP,
vol. 31(1990),
p.1247-1252.
C.W. Wu, R.Q. Hsu,
“An universal Velocity Field for the Extrusion of Non-Axisymmetric Rods with Non-Uniform Velocity Distribution in the Extrusion Direction”,
Journal of Materials Processing Technology,
vol. 97(2000),
p.180-185.
C.W. Wu, R.Q. Hsu,
“Theoretical Analysis of Extrusion of Rectangular, Hexagonal and Octagonal Composite Clad Rods”,
International Journal of Mechanical Sciences,
vol. 42(2000),
p.473-486.
M.D. Chen, R.Q. Hsu, K.H. Fuh,
”Forecast of shear spinning force and surface roughness of spun cones by employing regression analysis”,
International Journal of Machine Tools & Manufacture,
vol. 41 (2001),
p.1721-1734.
Chih-Kang Shih, Chinghua Hung,Ray-Quen Hsu,
”The finite element analysis on planetary rolling process”, .
Journal of Materials Processing Technology,
vol.113(2001),
p.115-123
C.K. Shih, C.H. Hung, R.Q. Hsu,
“A study on seamless tube in planetary rolling process”,
Journal of Materials Processing Technology,
vol. 121(2002),
p.273-284.
C.W. Wu, R.Q. Hsu,
“Extrusion of three-layer composite hexagonal clad rods”,
Journal of Materials Processing Technology,
vol.123(2002),
p.47-53.
M.D. Chen, R.Q. Hsu,
“Effect of over-roll thickness on cone surface roughness in shear spinning”,
Journal of Materials Processing Technology,
vol.159(2005),
p.1-8.
Keng-Liang Ou, Ray-Quan Hsu,
“Comparative study of polycrystalline Ti, amorphous Ti and multi-amorphous Ti as a barrier film for Cu interconnect”,
accepted by Journal of Vacuum Science and Technology B.
vol.30(1),
p.229-235.
Keng-Liang Ou, Yao-Nan Lin, Ray-Quan Hsu, Sheng-Yang Lee,
“In vitro study of crosslinked albumin on allylamine plasma-treated titanium surfaces”,
accepted by Journal of the Electrochemical Society.
Ming-Der Chen,Ray-Quen Hsu and K.H. Fuh,
“An analysis of force distribution in shear spinning of cone”,
Acceptted by International Journal of Mechanical Sciences.
K. L. Ou,S.Y. Shiou,Ray-Quen Hsu,
“Barrier capability of Hf-N Films with Various Nitrogen Concentrations Against Copper Diffusion in Cu/Hf-N/n + -p Junction Diodes ”,
Journal of The Electrochemical Society.
vol.152(2)(2005),
p.1-6
M.D. Chen, R.Q. Hsu,
"An analysis of force distribution in shear spinning of cone",
International Journal of Mechanical Sciences,
vol. 47 (6) (2005)
p902-p921
C.W. Wu, R.Q. Hsu,
"Extrusion analysis and workability prediction of three-layer composite hexagonal clad rods"
Journal of Materials Processing Technology
vol.174 (2006)
pp.312-317
R.Q. Hsu, J.R. Chang, D.L. Liang,
"Prediction of slug carry-up by the punch in blanking by air-blow of the slug",
Journal of Materials Processing Technology,
vol.201(2008),
pp.252-255.
徐瑞坤,梁達嵐,
"改良式SIMA法製備鎂合金半固態成形胚料之研究",
鎂合金產業通訊41期, 2008
C.C. Hsu, R.Q. Hsu, Y.H. Wu, T.W. Chi, C.H. Chiang, J.F. Chen, M.N. Chang,
"Analysis of InAsN quantum dots by transmission electron microscopy and photoluminescence."
Ultramicroscopy,
vol.180(2008),
pp.1495-1499.
R.Q. Hsu, H.B. Wang, D.L. Liang,
"Hot Embossing of Parallel v-Groove Microstructures on Glass",
Journal of American Ceramic Society,
vol.92 (2009),
pp.2605-2608.
CC Hsu, R.Q. Hsu, YH Wu
“Morphology and optical properties of single- and multi-layer InAs quantum dots”,
JOURNAL OF ELECTRON MICROSCOPY,
vol.59(2010),
pp.149-154.
J.C. Wang, A.T. Li, Y.P. Tsai, and R.Q. Hsu
“Analysis for diving regulator applying local heating mechanism of vapor chamber in insert molding process”,
International Communications in Heat and Mass Transfer,
vol.38(2011),
pp.179-183
Y.P. Tsai, J.C. Wang, and R.Q. Hsu
“THE EFFECT OF VAPOR CHAMBER IN AN INJECTION MOLDING PROCESS ON PART TENSILE STRENGTH ”,
EXPERIMENTAL TECHNIQUES,
vol.35(2011),
pp.60-64.
Y.P. Wang, R.Q. Hsu and C.W. Wu
“Design and Test of a MEMS-Based High G Smart Sensor”,
IEEE SENSORS JOURNAL,
vol.11(2011),
pp.1046-1050.
Y.N. Lin, K.M. Chang, S.C. Jeng, P.Y. Lin and R.Q. Hsu
“Study of release speeds and bacteria inhibiting capabilities of drug delivery membranes fabricated via electrospinning by observing bacteria growth curves ”,
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE,
vol.22(2011),
pp.571-577.
林憲助,吳志偉,徐瑞坤,
"六角斷面複合包芯材之擠製加工研究",
中國機械工程學會第十二屆學術研討會(1995),397. 。
鄭錦隆,吳志偉,徐瑞坤,
"多材料系軸對稱型複合多芯材擠製加工研究",
中國機械工程學會第十三屆學術研討會(1996),241. 。
鄭錦隆,吳志偉,徐瑞坤,
"多材料系-非軸對稱型複合多芯材擠製加工研究",
第二十屆全國力學會議論文集(1996),291. 。
J.L. Jeng, C.W. Wu, R.Q. Hsu,
"Extrusion of Three-Layer Composite Clad Rods",
IPMM , 1997, p103
U.B. Tsai, C.W. Wu, R.Q. Hsu,
"Hydrostatic Extrusion of Composite Rod",
Processing of IPMM, 1999,p1029-1034.
徐瑞坤,曾重誌,楊永光,洪偉恩
"應用田口方法於鎂合金壓鑄製程之最佳參數設計"
中國機械工程學會第21屆全國學術研討會, (2004) 。
黃建堯,梁嘉顯,陳峰志,侯帝光,徐瑞坤,
"以線切割放電加工法製作微型振鏡",
第四屆精密機械與製造技術研討會, (2006)
R.Q. Hsu, J.R. Chang, D.L. Liang,
"Prediction of slug carry-up by the punch in blanking by air-blow of the slug",
Proceedings of the International Conference on Advances in Materials and Processing Technologies, 2007.
C.C. Hsu, R.Q. Hsu, Y.H. Wu, T.W. Chi, C.H. Chiang, J.F. Chen, M.N. Chang,
"Analysis of InAsN quantum dots by Transmission Electron Microscopy and Photoluminescence",
The eleventh Frontiers of Electron Microscopy in Materials Science Conference, 2007.
C.C. Hsu, R.Q. Hsu, Y.H. Wu, T.W. Chi , R.S. Hsiao, M.N. Chang,
"Investigation of high percentages of nitrogen in InAsN quantum dots",
International Conference on Microscopy of Semiconducting Materials XV, 2007.
Y.P. Tsai, A.T. Lee, R.Q. Hsu,
"A Study on the heating and cooling cycle system via vapor chamber in injection molding process",
ANTEC, 2007.
蔡毓彬,徐瑞坤,蘇嘉宏,
"嵌入成型製程之殘留應力與嵌入成型件破裂之研究",
模具工業同業公會模具論文發表會
蔡毓彬,李艾璁,徐瑞坤,王榮昌,
"採用熱板之循環式加熱冷卻系統應用於射出成形製程之研究",
模具工業同業公會模具論文發表會
王玉平,林作斌,徐瑞坤,吳志偉,
"新式攻堅武器用微型高G值衝擊感測器之設計與模擬分析",
第十六屆國防科技學術研討會, 2007.
徐瑞坤,曾仕駿,林岳賢,
"不同螺紋與齒槽骨間隙對牙科植體影響之有限元素分析",
精密機械與製造科技研討會, 2008.
徐瑞坤,梁達嵐,黃柏升,
"改良式SIMA法製備鎂合金半固態成形胚料之研究",
精密機械與製造科技研討會, 2008.
Y.P. Wang, R.Q. Hsu, C.W. Wu,
"Finite Element Analysis of a MEMS-Based High G Inertial Shock Sensor",
2008 NSTI Nanotechnology Conference and Trade Show, 2008.
Y.P. Wang, R.Q. Hsu, C.W. Wu,
"Design and simulation of a MEMS high G inertial impact sensor",
2008 IEEE Sensors Applications Symposium, 2008.
Y.P. Wang, R.Q. Hsu, C.W. Wu,
"Design of a non-powered MEMS high G shock sensor.",
MICRONANO2008-2ND International Conference on Integration and Commercialization of Micro and Nanosystems, 2008.
Y.P. Tsai, J.C. Wang, T.Y Huang, R.Q. Hsu,
"The effects of rotor incorporated mold for the elimination of the welding line in injection molding.",
ANTEC, 2008.
Y.N. Lin, R.Q. Hsu, K.M. Chang,
"The first-aid strip of copolymer, produced by electrospinning",
2008 NSTI Nanotechnology Conference and Trade Show, 2008.
Y.N. Lin, R.Q. Hsu, K.M. Chang,
"The anti-ultraviolet nano-fibers formed during electrospinning",
2008 NSTI Nanotechnology Conference and Trade Show, 2008.
Y.P. Tsai, J.J. Wei, R.Q. Hsu,
“The research of reduce residual stress of polycarbonate products by heat treatment”,
Annual Technical Conference - ANTEC, Conference Proceedings, v 4, p 2051-2055, 2009, 67th Annual Technical Conference of the Society of Plastics Engineers 2009, ANTEC 2009
Y.P. Tsai, C.F. Hsu, R.Q. Hsu,
“Study on the in-mold punching of the thermoplastic injection molding”,
Annual Technical Conference - ANTEC, Conference Proceedings, v 5, p 2986-2990, 2009, 67th Annual Technical Conference of the Society of Plastics Engineers 2009, ANTEC 2009
D.L. Liang, S. Sugiyama, R.Q. Hsu, J. Yanagimoto,
"Reproduction of Copper Alloy Scraps by Semisolid Processing",
2010 日本機械学会第18回機械材料・材料加工技術講演会(M&P2010)
W.T. Chiang, C.S. Hsien, R.Q. Hsu,
"Study on the effect of the bendability of DSSC semiconductor electrode prepared by electro-spinning",
International Conference on Nanophotonics 2011.
P.T. Lee, Y.N. Lin, K.M. Chang, S.C. Jeng, R.Q. Hsu,
"Fabrication of flexibility optical sensing nanofibers via Nature Dye and TiO2 / ZnO Coaxial electro-spinning as Dye-sensitized solar cell applications",
International Conference on Nanophotonics 2011
蔡毓斌,柯丁漢,徐瑞坤, "塑膠射出成形機之螺桿與料管之硬化處理研究", 財團法人機械研究發展中心, 1988。
謝育鈞,許俊男,徐瑞坤, "放電加工機工作台折動部用鑄鐵之硬化效果", 財團法人機械研究發展中心, 1997。
林俊傑,徐瑞坤, "裝配公差配置之最佳化研究",中科院, 1998.。