10.) 3D Printed Object: Hybrid Design + FDM Print

Post date: Nov 13, 2019 8:14:24 AM

Assignment:

Assigned:

Due:

3D Printed Object: Hybrid Design + FDM Print

Wed, Nov 13

Tue, Nov 26 @ 11:59am (noon!)

Tue, Dec 3 @ 11:59am (noon!)

Assignment Description:

With your partner, select three of each of your concepts and evaluate them based on the criteria below. Then, after each settling on a final selection, brainstorm how you might go about creating a hybrid of both concepts. Using Rhinoceros, Meshmixer, Tinkercad, or any other tools explored this semester, create a final design that hybridizes both concepts you and your partner selected, and print it on the FDM 3D Printer.

Assignment Requirements:

1.) Select three of each of your concepts and evaluate them based on the following criteria:

a.) Function - how does this object function? Is is successful in doing so?

b.) Form - what are the aesthetic qualities of this object?

c.) Self-supporting - is this object self-supporting? Will it print without support material?

d.) 3D Printability - Is this 3D model water tight and ready to print? What is its likelihood for success in printing?

2.) Brainstorm with your partner on how you might design a hybrid of two of your designs (one of your and one of your partner's). Based on your evaluations and brainstorming, you should each select a final concept to move forward with

3.) Sketch (on paper!) at least FIVE concepts of what this design might look like

3.) Collaborate on the design of a 3D model that demonstrates hybridity of the two selected concepts. While it is possible to combine 3D models in the various software platforms we've explored, it might be necessary to rebuild - from scratch - the final hybrid object.

4.) 3D Print your final design on the FDM printer (we will be doing an intro to the printers next class). You'll need to sign out time with the printer, so do not wait until the last minute!

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Documentation

5.) This counts at two blog posts.

6.) In addition to images and photo documentation, your posts should address all of the following:

a.) A brief (1-2 sentence) introduction to this project

b.) Your 6 original concepts, your partner's concepts, and documentation of the hybrid design.

c.) A written explanation of how your design represents a hybrid of the original concepts selected.