Roth Tanks, 285 Gallon, Fresh Oil Bulk
Roth tanks are double-walled which helps to satisfy containment requirements. Their rectangular footprint help the tanks to fit tightly in a given space, and their metal enclosure is very attractive.
The 275 Gallon tanks are typically used for bulk fresh-oil products.
Note that on top of the tanks are pumps and gauges.
Roth Tanks, 400 Gallon, Fresh Oil Bulk (Waste Oil)
The 400-Gallon tanks are generally used for collecting waste-oil and they can be connected in series so that when one fills up, waste oil is diverted to another.
Note that on top of the tank is a pump and gauge.
Stackable Poly Tanks
Stackable poly tanks are often used for smaller quantity fluids like specialty oil blends, auto tramission fluid, windshield washer fluid, etc. Some municipalities will require a containment pan be stored underneath of the poly tanks to catch any accidental spills.
To the tank's left, the pumps are installed. The fluid gauges aren't necessary since the poly tanks are clear and you can see the fluid levels.
6-Gun Capacity Oil Dispensing Cabinet
Our Oil Dispensing Cabinet is an inexpensive alternative to overhead reels. Overhead reels are expensive and eventually the springs wear out and require service or replacments.
Our Oil Dispensing Cabinets come in 6 and 8 gun capacities.
6-Gun Capacity Oil Dispensing Cabinet
Lines from left to Right
1, 2) Fresh Oil 3) Windshield Washer Fluid 4) Quick Disconnect Waste Oil Line 5, 6) Fresh Oil
8-Gun Capacity Oil Dispensing Cabinet (1/2 shown)
This cabinet was being manufactured for a customer. Note there are 4-slots per segment.
8-Gun Capacity Oil Dispensing Cabinet
Both Cabinets shown, each on either side of a support post.
From left to right:
1, 2, 3) Fresh Oil 4) ATF 5) Windshield Washer Fluid 6, 7, 8) Fresh Oil
8-Gun Capacity Oil Dispensing Cabinet
Shot taken at an angle