Welcome to EDD Online Portfolio

Element G: CONSTRUCTION OF A TESTABLE PROTOTYPE

CAD Drawings

Annotated Part Drawing 1

(add additional drawings if needed for more parts)

Assembly Drawing

CAD Assembly Video

Exploded View video .mp4

Mock-Up Image

Testable Parameters

size
weight
safety
durability
cost

Final Build Procedures Overview

3d printing
Wiring
Code design
PIR sensor installation
Code testing
Light installation into the prototype
Drawbacks

Resource Planning

Copy of Resource Planning

Build Modifications

-We put the sensor in a different spot to not interfere with the screws

-We can't use the LED strip, so we decided to use individual LED lights.

Construction Photos

insert photos of before during and after construction. This should include daily photos with descriptions of what happened during each build day.

Prototype Build Day 1: Soldered the sensor and attached to outlet

Prototype Build Day 2: Made the code and tested the sensor

Prototype Build Day 3: Drilled a hole in the side to account for the placement of screws in the outlet.

Prototype Build Day 4: We tried to see if the 3d printed part could actually fit in an actual outlet.

Prototype Build Day 5: connected circuit to light in outlet and installed a new sensor.

Prototype build day 6: did more testing and made the trifold

Incremental Testing Photos

Testing Day 1: Began to test the sensor at different lengths and found that it is faulty.

Testing Day 2: We put it in the box and ran some time trials to see how long it stayed on.

Testing Day 3: we ran time trials checking how long it stayed on and how long till it turned off.

Testing Data

Testing Data

Citations (use easybib.com,https://www.citationmachine.net/, or Google docs. )

Build Expert List: Brad Thorpe, Nannan (Nancy) He, Megat Hamari,

Page updated

Report abuse