The video i got inspired by
the design before collecting it
the design after i collect it
I tried before beginning Maker diploma to print an complicated prototype with many joints and slots but i failed to let the parts fit with each other as the the scale was not right, so i though in this time to start from scratch and began with simple design, then i got inspired with this video, he draw with different technique, so i decided to do the same design but with the technique i learned in the videos of week 2
software: fusion 360 to draw the design, laser work to print the design
machine in fab lab: Fab Lab Egypt's Morn MT3050D CO2 Laser Cutter to print the model
materials:plywood and cardboard
fusion 360
the cardboard prototype
the plywood
The software i used
The laser cut printer
I tried before starting the assignment to practice the exercises so that what i came up with
the car
the fidget spinner
Arabesque design
the wardrobe
Then I felt that i could start with the assignment, so i started by taking the measurement of my mobile by the ruler and through this website, then convert the dimension from cm to mm to fit in fusion360
Then started to draw sketches for each side
the core parts
The side parts
Taking the dimension of the t slot
Then extrude each part
Then assemble the parts with each other
The design after making the assemble
After rendering
then adjust the features to print the design on laser work software
The assumption of the time that i will consume and other features
As i tried before to print in fab lab with the laser cut machine in week 1, so this time was more easier than the first time, as i was know how to start
I started by putting the stl file on the fab lab computer so the laser machine will read the file and then start printing
then fixing the plywood in suitable place in the machine by using tape
after printing
the time i consumed
Then adjust the features of the laser machine by starting with tracking
6mm acrylic part
as i was the first one to print on Sunday so some parts were not available in the lab, so me and my peer sahar and amany (instructor) were trying to search for this transparent acrylic part to help us to make tracking in the laser machine, until we find an alternative this 6mm acrylic part, then we found this part by chance after we finished the printing
After i finished the printing, i Got a feedback from sahar and amany that it would be more good if i used the fillet features to the whole edges, so it would be better than the Sharpe one
Title of Media
i faced some challenges through drawing the design on the software before printing it, the challenge that i faced was that i cannot make some lines fully defined, then meena elbadry replied me, and also mego, as i felt with mego s replying that it was a (سؤال بديهي)
Assemble icon
by knowing the feature of assemble, it will help me to collect and know how the joints could be fit in my design before printing it, as my project will be printed with the 2d mode on laser cut machine
i found this video, using silver and gold matrials instide of using plywood to cut a designs on laser cut
Title of Media