All Projects can be found here.
Team: Ali Emir Özen, Mahmut Küçükakyüz, Abdullah Taha Aygün
Batuhan Erden
Year: 2024-2025 Spring Semester
Description: In this project, a gaming hub system where users can play two different games was developed. There are 3 modules in the system. In the first module, the necessary definitions are made and the game is selected. The game is chosen using KEY[3] and KEY[2]. According to this, if KEY[3-2] is “00”, no game is selected; if it is “01”, the Dino Game is selected; and if it is “10”, the Hot-Cold Game is selected. When the system is turned on, it waits for the user to choose a game.
More Information: Project report
Team: Feyza Türker, Yiğit Atik, Berkay Kürkçü
Year: 2020-2021 Fall Semester
Description: In this project, we aimed to make a system that controls lighting conditions for a cross way. Therefore, we work on a possible way which is shown in Figure 1.
More Information: Project report
Team: Ömer Faruk Aksu, Atakan Pehlivanoğlu
Year: 2019-2020 Fall Semester
Description: Simple alarm clock that has activated using the leftmost button and set up by the selected hour using increment/decrement buttons. Trigger will be the LED and is activated by default. To deactivate trigger, open any switch.
More Information: Project report
Team: Osman Can Gudul, Abdulkadir Kundakcioglu
Year: 2019-2020 Fall Semester
Description: In this project, we design a VGA interface using FPGA. We used Verilog HDL and also we design a mini-game for trying video concepts in our project. For mini-game, we had to design a controller too.
More Information: Project report
Team: Mustafa Can Gülbaş, Diren Erdem Aydın
Year: 2018-2019 Fall Semester
Description: In this project, a car parking lot system is implemented on FPGA, using Verilog HDL. Trough ultrasonic sensors, system is able to understand the objects which are in its range, and with this data, cars in the lot are counted according to system logic.
More Information: Project report
Team: Uygar Akkoç, Mehmet Taylan Eğer
Year: 2018-2019 Fall Semester
Description: The aim of the project was to display a counter and a frame on a monitor through VGA using interrupts for the KEY push-buttons.
More Information: Project report
2019-2020 Fall
Team: Alper Salik, Hasan Pektaş, Utku Mutlu
Tags: FPGA
2019-2020 Fall
Team: Ayça Kırca, Berkay Sığırcı, Tunahan Gümüş, Yiğit Can Yalazay
Tags: Using peripherals, FPGA
2019-2020 Fall
Team: Ece Pınar Yıldırım, Esra Geneci, Eyüp Yasuntimur, Taha Turgut Şahin
Tags: Embedded Linux, Using peripherals
Figure 1: Main menu
2018-2019 Fall
Team: Kerem Özdemir, Mustafa Melih Metin, Sedatcan Sadrazam, Zahid Demirtaş
Tags: Embedded Linux
Figure 4: Output of the display
2018-2019 Fall
Team: Remzi Orak, Mustafa Utku Öztürk, Bengisu Özmelleş
Tags: Using peripherals, FPGA
Figure 1: Master-slave communication [1]
2018-2019 Fall
Team: Sena Akbulut, Sena Koyuncu
Tags: Research and simulation, FPGA, Serial communication