FTC 101

Build Bot

Anaya instructions

In this step we will be wiring the 4 motors that were added during the build step.

Controller Hub (Motor Ports) -> Motor

0 -> Front Left

1 -> Rear Left

2 -> Rear Right

3 -> Front Right

Connect the control hub to a laptop/desktop that has the REV Hardware Client app using the usb c cable
Open the REV Hardware Client
Go to "Program and Manage"

Open the FTC driver station app on the driver hub and it should say “Robot Connected”
Next press the three dots to open the option menu: (picture 1)
Press on configure the robot: (picture 2)
Press New -> Control Hub Portal -> Control Hub -> Motors
1. For port 0 press “nothing” to show the dropdown menu and choose “GoBILDA 5202/3/4 series” and for the motor name type “frontLeft”
2. Repeat step a for ports 1 (backLeft), 2 (backRight), and 3 (frontRigh)
3. Press Done (picture 3)
Press Done -> Done -> Done -> Save -> Type “drive”
If your top right corner say “<No Config Set>” then click “Activate” (picture 4)

Page updated

Report abuse