HELP!
REASONS WHY YOUR CLOCK DOES NOT WORK:
1.) The Escapement Gear and Pendulum need to be orientated correctly to each other.
CORRECTION: Check the assembly directions.
2.) The parts on the shaft are pushed together to tightly.
CORRECTION: Space the parts out on the shafts.
3.) To much friction.
CORRECTION: By hand run the 0.251 reamer through the bearings.
4.) Still to much friction.
CORRECTION: Add up to three of the 1/2" nuts for weight.
5.) The Gear and the Pendulum are not aligned.
CORRECTION: Check to see if the Large Bearing and Short Shaft are pressed
into the Upright correctly. Remake the Upright.
6.) Still doesn't work.
CORRECTION: Ask for help.