BOOTH_LIGHT_PANEL

On the left hand side of the booth is a panel that you can 

control house lights without having to use the light board.

This panel is different from the backstage panel in that the sliders

give you more lighting options, not just the push buttons.

BOOTH MINI LIGHT PANEL INSTRUCTIONS:

1: Push the MANUAL button at the bottom. *This may turn house lights off.

2: Push sliders A and B (if they aren't already) up to the top bringing the House Lights up.

You can lower them if that is what you want for your event.

*Please note that if you lower the House Lights, all the other lights will be lowered as well.

Adjust the others accordingly.

Here's what the other sliders do:

C = The PIT Lights: These turn the floor, aka PIT lights, up.

Usually about halfway up are bright enough.

D = The full stage being lit. Front and overhead.

E = This puts the stage lights on just at the front of the stage just for presentations,

aka the other SENIOR SEM setting. This is similar to the PRESET #1 button.

Slide it up about halfway.

F = Two lights focused on STAGE RIGHT. This is if only the podium

Is being used on the stage, without the need for the other lights.

*When you see this panel in the booth, the sliders will be left in the

default position of: House lights up with stage(E) and PIT(C) lights on, so you

would only need to push the MANUAL button.

The picture above shows what that looks like.

You can always change them for your event.

The green dots show you where to set the sliders back to.