Journals (International) 

• Seung Hyun Won, Kyoung Kook Hong, Sang Won Yoon*, Balanced Vertical Structures for Thermal Expansion Matching and Reduced Thermomechanical Stress in Silicon Carbide Double-Sided Cooling Power Modules,"  IEEE Transactions on Components, Packaging and Manufacturing Technology (early access)[https://doi.org/10.1109/TCPMT.2025.3641249] 

• Sungtaek Hwang, Eun Pyo Hong, Min-Ki Kim, Dong Keun Jang and Sang Won Yoon*, "Thermal Behavior in Vertically Stacked Cascode GaN HEMT Power Modules including Mutual Heating, Dissipation Disturbance, and Solder Voids," IEEE Transactions on Components, Packaging and Manufacturing Technology,( early access ) [https://doi.org/10.1109/TCPMT.2025.3608690] 

• Jaejin Jeon, Jeonghoon Song, Jun Young Oh, Seok Hwan Lee, Younghun Kim, Yun Ho Kim, Sam-Jong Choi and Sang Won Yoon*, "Residual stress and deformation analysis considering adhesive material properties to enhance manufacturing of HBM,"  Journal of Materials Research and Technology (IF: 6.6), September-October 2025  [https://doi.org/10.1016/j.jmrt.2025.08.059]  

- Collaborative paper with Samsung Electronics Co., Ltd

• Jaejin Jeon and Sang Won Yoon*, "Advanced Reliability Assessment Approach of Power Modules under Low-Cycle Thermal Fatigue through Redefined 3-D J-Integral," IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 15, no. 5, pp.982-990, May 2025  [https://doi.org/10.1109/TCPMT.2024.3522123]

• Jung Su Yoon and Sang Won Yoon*, "Warpage Analysis and Improvement Approach of Transfer-Molded Power Semiconductor Modules Considering EMC Properties and Module Structure", Journal of Semiconductor Technology and Science, vol. 25, no. 2, pp.154-159, April 2025 [https://doi.org/10.5573/JSTS.2025.25.2.154]

• Jeong Hun Song and Sang Won Yoon*, "Comparative Study of Thermal Dissipation in increasing DRAM Layers of HBM using 3D FEA Simulations", Journal of Semiconductor Technology and Science vol. 25, no. 2, pp.142-147, April 2025  [https://doi.org/10.5573/JSTS.2025.25.2.142]

• Ji Yong So, Young-Doo Yoon and Sang Won Yoon*, "Thermal Analysis of Indirect Double-Sided Cooling Power Modules Considering the Impact of Thermal Interface Material Characteristics", Journal of Semiconductor Technology and Science vol. 25, no. 2, pp.148-153, April 2025 [https://doi.org/10.5573/JSTS.2025.25.2.148]

• Taerim Kwon  and  Sang Won Yoon*, "Anomaly Detection of Motion Artifact in Photoplethysmography (PPG) Sensors using Unsupervised Learning," IEEE Sensors Journal, vol. 24, no. 14, July 2024 [https://doi.org/10.1109/JSEN.2024.3404558]

• Jangmuk Lim, D. K. Jang and  Sang Won Yoon*, “Novel Temperature Calibration Method of E-mode and D-mode GaN Power Modules Considering Dynamic on-resistance,” IEEE Transactions on Industrial Electronics, vol. 71, no. 5, pp. 5245 - 5252, May 2024 [https://doi.org/10.1109/TIE.2023.3279551]

- Collaborative paper with Semi-powerex Corp.

• Seongmoo Cho, Sunghyun Pyun and  Sang Won Yoon*, "Analysis and Design Optimization of Tilted Rounded-Rectangular Pin-Fin Heat Sinks for xEV Double-Sided Cooling Power Module," IEEE Journal of Emerging and Selected Topics in Power Electronics, vol 12, no. 2, pp.1803-1812, Apr 2024 [https://doi.org/10.1109/JESTPE.2024.3354772]

• Hobeom Han , Gunhee Kim , Soohyung Choi , Amar Basu , and Sang Won Yoon*, “Human Activity and Correlated Posture Monitoring using Earlobe-worn Wearable Sensor System and Deep Learning Algorithm,” IEEE Sensor Journal, vol. 24, no. 1, pp. 533-542, Jan 2024 [https://doi.org/10.1109/JSEN.2023.3332897]

- Collaborative paper with WSU, USA

• Min-Ki Kim, Young-Doo Yoon and Sang Won Yoon*, “Actual Maximum Junction Temperature Estimation Process of Multichip SiC MOSFET Power Modules with New Calibration Method and Deep Learning,” IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 11, no. 6, pp. 5602-5612, Dec 2023 (IF: 5.462) [https://doi.org/10.1109/JESTPE.2022.3189230]

• Seongmoo Cho and Sang Won Yoon*, “Analysis Model for Thermal Resistance of Double-sided Cooling Power Module with Pin-Fin Heat Sink used in xEVs,” Journal of Power Electronics, vol. 23, pp. 1880-1887, Dec 2023 [https://doi.org/10.1007/s43236-023-00708-x]

• Sunghyun Pyun, Seongmoo Cho, and  Sang Won Yoon*, “Analysis of Perforated Pin Design use in Automotive SiC Power Module Heatsink,” accepted to Journal of Power Electronics, vol. 23, pp. 1888–1895, Dec 2023 [https://doi.org/10.1007/s43236-023-00707-y ]

• J. Heo, H. Lee, Sang Won Yoon and K. Kim, “Responses to Take-Over Request in Autonomous Vehicles: Effects of Environmental Conditions and Cues,” IEEE Transactions on Intelligent Transportation Systems, vol. 23, no. 12, pp. 23573-23582, Dec 2022. (IF: 9.551) [https://doi.org/10.1109/TITS.2022.3201074]

• H. -J. Lee, Sang Won Yoon and Y. -D. Yoon, “Hybrid Distribution Transformer Based on an Existing Distribution Transformer and a Series-Connected Power Converter,” IEEE Transactions on Power Delivery, vol. 37, no. 5, pp. 4202-4211, Oct 2022 [https://doi.org/10.1109/TPWRD.2022.3147820]

• J. Lim, J. Jeon, J.-h. Seong, J. Cho, S. M. Cho, K. S.Kim, Sang Won Yoon*, “Iterative Electrical–Thermal Coupled Simulation Method of Automotive Power Module used in Electric Power Steering System,” IEEE Access vol. 9, pp. 164712-164719, Dec 2021 (Corresponding Author, IF: 3.367) [https://doi.org/10.1109/ACCESS.2021.3133530]

- Collaborative paper with LG Electronics Inc.

• J. Lim, J. Seong, J. Jeon, Y.S. Kim, H.-C. Im, W.S. Hong, Sang Won Yoon*, “Design and Experimental Evaluation of Transfer-Molded 650 V Super-Junction mosfet Power Module for Industrial Applications,” IEEE Transactions on Industry Applications, vol. 57, no. 6, pp. 6295-6305, Nov.-Dec 2021 (Corresponding Author, IF: 3.654)  [https://doi.org/10.1109/TIA.2021.3113624]

- Collaborative paper with iA Powertron and Korea Electronics Technology Institute (KETI)

• J. -Y. Ryu, S. -W. Hwang, J. -W. Chin, Y. -S. Hwang, Sang Won Yoon and M. -S. Lim, “Mathematical Modeling of Fast and Accurate Coupled Electromagnetic-Thermal Analysis,” IEEE Transactions on Industry Applications, vol. 57, no. 5, pp. 4636-4645, Sept.-Oct. 2021 (IF: 3.654) [https://doi.org/10.1109/TIA.2021.3086823]

• J. Jeon, J.-H. Seong, J. Lim, M. K. Kim, T. Kim, Sang Won Yoon*, “Finite Element and Experimental Analysis of Spacer Designs for Reducing Thermomechanical Stress in Double-Sided Cooling Power Modules,” IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 9, no. 4, August 2021  (IF: 4.472) [https://doi.org/10.1109/JESTPE.2020.2998546]

- Collaborative paper with Hyundai Motor Company

• Jonghan Kim and Sang Won Yoon*,  “Dual Deep Neural Network based Adaptive Filter for Estimating Absolute Longitudinal Speed of Vehicles,” IEEE Access, vol. 8, no. 1, Nov. 2020 (IF: 3.745)  [https://doi.org/10.1109/ACCESS.2020.3040733]

• Min-Ki  Kim and Sang Won Yoon*, “Thermal Impedance Characterization Using Optical Measurement Assisted by Multi-Physics Simulation for Multi-Chip SiC MOSFET Module,” Micromachines, vol. 11, no. 12, Nov 2020 (IF: 2.524) [https://doi.org/10.3390/mi11121060]

• M. Byeon and Sang Won Yoon*, “Analysis of Automotive Lidar Sensor Model considering Scattering Effects in Regional Rain Environments,” IEEE Access, vol. 8, no. 1, May 2020 (IF: 3.745)  [https://doi.org/10.1109/ACCESS.2020.2996366]

• H. Jang, H. Han, and Sang Won Yoon*, “Comprehensive Monitoring of Bad Head and Shoulder Postures by Wearable Magnetic Sensors and Deep Learning,” IEEE Sensors Journal, vol. 20, no. 22, pp. 13768-13775, Nov 2020 (IF: 3.073)  [https://doi.org/10.1109/JSEN.2020.3004562]

• H. Han, H. Jang, and Sang Won Yoon*, “Novel Wearable Monitoring System of Forward Head Posture Assisted by Magnet-Magnetometer Pair and Machine Learning,” IEEE Sensors Journal, vol. 20, no. 7, pp. 3838-3848, Apr 2020 (IF: 3.073) [https://doi.org/10.1109/JSEN.2019.2959817]

• J. Lim, H. Kim, J. K. Kim, S.J. Park, T.H. Lee and Sang Won Yoon*, “Numerical and Experimental Analysis of Potential Causes Degrading Contact Resistances and Forces of Sensor Connectors for Vehicles,” IEEE Access, vol. 7, pp. 126530-126538, Sep 2019 (IF: 4.098) [https://doi.org/10.1109/ACCESS.2019.2939377]

- Collaborative paper with Hyundai Motor Company 

• J. Seong, S. Park, M.K. Kim, J. Lim, H. Han, J. Jeon, Sang Won Yoon*, “DBC-Packaged Inverter Power Module for Integrated Motor-Inverter Design used in 48V Mild Hybrid Starter-Generator (MHSG) System,” IEEE Transactions on Vehicular Technology, vol. 68, no. 12, pp. 11704-11713, Dec 2019 (IF: 5.339)  [https://doi.org/10.1109/TVT.2019.2948644]

- A collaboration with Hyundai Mobis 

• J. Seong, S.W. Yoon*, S. Park, M.K. Kim, J. Lim, J. Jeon, H. Han, “Multi-physics Simulation Analysis and Design of Integrated Inverter Power Module for Electric Compressor (e-Compressor) used in 48 V Mild Hybrid Vehicles,” IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 7, no. 3, pp. 1668-1676 , Sep 2019 (IF: 5.972) [https://doi.org/10.1109/JESTPE.2019.2905902]

- Collaborative paper with Hyundai Mobis

• H. Han and Sang Won Yoon*, “Gyroscope-Based Continuous Human Hand Gesture Recognition for Multi-Modal Wearable Input Device for Human Machine Interaction,” Sensors, vol. 19, no. 11, June 2019 (IF: 3.031)  [https://doi.org/10.3390/s19112562]

• M.K. Kim and Sang Won Yoon*, “Miniature Piezoelectric Sensor for In-situ Temperature Monitoring of Silicon and Silicon Carbide Power Modules Operating at High Temperatures,” IEEE Transactions on Industry Applications, vol.54, no. 2, pp. 1614-1621, Mar-Apr 2018 (IF: 2.743) [https://doi.org/10.1109/TIA.2017.2777923]

• I. Sohn, Sang Won Yoon, S.-H. Lee, “Distributed scheduling using belief propagation for internet-of-things (IoT) networks,” Peer-to-Peer Networking and Applications, vol. 11, no. 1, pp. 152-161 2018 (IF: 1.514) [https://doi.org/10.1007/s12083-016-0516-6]

• Sang Won Yoon*, “Numerical Study and Design Optimization of Electromagnetic Energy Harvesters Integrated with Flexible Magnetic Materials,” Journal of Mechanical Science and Technology, vol. 31, no. 5, pp. 2399-2406 May 2017 (IF: 1.128)  [https://doi.org/10.1007/s12206-017-0437-1]

• S.-H. Han, A. Yoo, Sang Won Yoon and Y.-D. Yoon, “A Simple Method for Identifying Mechanical Parameters Based on Integral Calculation," Journal of Power Electronics, vol. 16, no. 4, pp. 1387-1395, Oct 2016 (IF: 0.931) [https://doi.org/10.6113/JPE.2016.16.4.1387]

• J. Lee and Sang Won Yoon*, "Optimization of Magnet and Back Iron Topologies in Electromagnetic Vibration Energy Harvesters", IEEE Transactions on Magnetics, vol. 51, pp. 7208807 (7pp), June 2015 (IF: 1.386)  [https://doi.org/10.1109/TMAG.2014.2382596]

• Q. Li, P. Peng, G.-X. Chen*, Sang Won Yoon*, “High-k polymer/carbon nanotube composites based on a polyhedral oligomeric silsesquioxane matrix facilitated by ionic liquid,” Journal of Materials Chemistry C,vol .39, no. 2.pp. 8216-8221, Aug 2014 (IF: 4.696) [https://doi.org/10.1039/C4TC01199F]

• G.-X. Chen and Sang Won Yoon*, “Drying of Methanol and Methyl Acetate from Poly(vinyl alcohol) Flakes,” Drying Technology, vol. 32, no. 10,pp. 1210-1218, June 2014 (IF: 1.742)  [https://doi.org/10.1080/07373937.2014.890214]

• Sang Won Yoon, X. Ren, G.-X. Chen, "Preparation and dielectric properties of poly(ε-caprolactone) compounded with “bucky gels”-like mixture", Journal of Applied Polymer Science, vol. 131, no. 10, May 2014 (IF: 1.640)  [https://doi.org/10.1002/app.40231]

• J. Lee and Sang Won Yoon*, "Topology Design Optimization of Electromagnetic Vibration Energy Harvester to Maximize Output Power," Journal of Magnetics, vol. 18, no. 3, pp. 283-288, Sep 2013 (IF: 0.326) [https://doi.org/10.4283/JMAG.2013.18.3.283]

• Sang Won Yoon*, M. D. Glover, H. A. Mantooth, K. Shiozaki, “Reliable and Repeatable Bonding Technology for High Temperature Operational Automotive Power Modules used in Electrified Vehicles,” IOP Journal of Micromechanics and Microengineering, vol. 23, no. 1, pp. 283-288, 2013 (IF: 1.790)  [https://doi.org/10.1088/0960-1317/23/1/015017]

• Sang Won Yoon*, M. D. Glover, K. Shiozaki, “Nickel-Tin Transient Liquid Phase Bonding towards High Temperature Operational Power Electronics in Electrified Vehicles,” IEEE Transaction on Power Electronics, vol. 28, no. 5, pp. 2448-2456, May 2013 (IF: 4.080) [https://doi.org/10.1109/TPEL.2012.2212211]

• Sang Won Yoon*, S. Lee, K. Najafi, “Vibration-Induced Errors in MEMS Tuning Fork Gyroscopes,” Sensors and Actuators A: Physical, vol. 180, pp. 32-44, June 2012 (IF: 1.802) [https://doi.org/10.1016/j.sna.2012.04.022]

• Sang Won Yoon*, S. Lee, K. Najafi, “Vibration Sensitivity Analysis of MEMS Vibratory Ring Gyroscopes,” Sensors and Actuators A: Physical, vol. 171, no. 2, pp. 163-177, Nov 2011 (IF: 1.941) [https://doi.org/10.1016/j.sna.2011.08.010]

• Sang Won Yoon*, S. Lee, N.C. Perkins, K. Najafi, “Shock protection improvement using integrated novel shock protection technologies,” IEEE/ASME Journal of Microelectromechanical Systems, vol. 20, no. 4, pp. 1016-1031, May 2011 (IF: 2.157) [https://doi.org/10.1109/JMEMS.2011.2148154]

• Sang Won Yoon*, S. Lee, N.C. Perkins, K. Najafi, “Analysis and wafer-level design of high-order silicon vibration isolator for resonating MEMS devices,” IOP Journal of Micromechanics and Microengineering, vol. 21, no. 1, pp. 015017 (11 pages), 2011 (IF: 2.281) [https://doi.org/10.1088/0960-1317/21/1/015017]

- Selected for “the best papers published within the last two years”

- Selected for “Highlights of 2011 collection”

• K. King, Sang Won Yoon, N.C. Perkins, K. Najafi, “Wireless MEMS inertial sensor system for golf swing dynamics,” Sensors and Actuators A: Physical, pp. 619-630, 2008 (IF: 1.348) [https://doi.org/10.1016/j.sna.2007.08.028]

• Sang Won Yoon*, N. Yazdi, N.C. Perkins, K. Najafi, “Micromachined integrated shock protection for MEMS,” Sensors and Actuators A: Physical, pp. 166-175, 2006 (Corresponding Author, IF: 1.363) [https://doi.org/10.1016/j.sna.2005.12.032]