Embedded Files
5 kW Bi-directional Programmable DC Power Supply :
The bi-directional programmable DC power supply of IT6000C series combines two functions in one: source and sink with energy regeneration. Based on these functions, IT6006C 800-20 offers the functionality of two-quadrant operation. The regenerative capability enables the energy consumed to be fed back to the grid cleanly, saving costs from energy consumption and cooling, while not interfering with the grid. It supports master-slave paralleling with averaging current distribution. Built-in waveform generator supports generating arbitrary waveforms, and import LIST files for waveforms via front panel USB port.
1KW Solar Array Simulator:
It is a unique PV Emulator with unparalleled features that set it apart. This PV Emulator works not only as a solar array emulator, but as a simulator as well. The device is capable of producing a wide range of responses generated under controlled external conditions such as the time of the day, effects of the season and location. It is also curated to best accommodate the specifications of various manufacturers.
dSPACE:
The real-time hardware based on PowerPC technology and its set of I/O interfaces make the controller board an ideal solution for developing controllers in various fields, such as drives, robotics, and aerospace. The board is used in many university laboratories. The DS1202 R&D Controller Board upgrades your PC to a powerful development system for rapid control prototyping (“R&D” stands for research & development). Real-Time Interface provides Simulink blocks for graphical I/O configuration. The board can be installed in virtually any PC with a free PCI or PCIe slot.
Inverter Stack:
This power module is designed by using SEMIKRON –IGBT for AC/DC/BLDC Motor control / Cascaded type Multilevel inverter application. This power module can be used for AC, DC, application by proper external PWM controller interfacing (like Dspic , FPGA & DSP).
Power Quality Analyzer:
HIOKI PW3198 is a power quality analyzer for monitoring and recording power supply anomalies, allowing their causes to be quickly investigated, and also for assessing power supply problems such as voltage drops, flicker, harmonics, and other electrical issues.
Programmable DC Power Supply:
Variable programmable DC power supply of 150 watt and can be varied from 0-30 V and 0-5 Amps. In this, the output voltage can be continuously regulated from 0 to its nominal value and current as well.
Precision LCR meter:
This scientific precision LCR meter is used to measure / calibrate the impedance parameters like resistor, inductor and capacitor or absolute value of impedance (Z) precisely.
FPGA Controller:
WAVECT Controller is a compact, versatile real time control prototyping system. Comprising of high end FPGA for fast computing and IO, dual core processor for control and communication, scalable embedded voltage and current sensors, large number of PWM outputs and high speed IO's, it is designed to address today's complex problems. Coupled with an easy and powerful model based development environment, push button device binary and configuration generation and a dedicated instrumentation software, it forms a complete control prototyping solution.
Wavect real–time control prototyping system is modular, scalable and supported by a powerful model based design environment. It is ideal for leading edge research and development in power conversion systems. It can be used for applications such as Motor drives (BLDC Motor, PMSM, SRM, Induction Motor, DC Motor), Renewable Energy systems (Wind Emulator, Solar Emulator, Doubly-Fed Induction Generator based Wind System, Grid Connected/Standalone Solar System), Power Quality (Active Power Filter, Grid Emulator, Statcom), Electric Vehicles and Microgrid etc.
AC/DC Electronics Load:
AN23 series DC electronic load covers voltage of 150V/600V/1200V, and power 150W~48kW. It is mainly used for testing of products in many fields such as new energy vehicle OBC, power battery, charging spot test, power electronics, etc.
Flexible Inductor:
This flexible inductor in our lab generally designed for both 3-phase as well as 1-phase as a filter inductor from 1mH to 5mH range.
PMSM Motor drive:
The permanent-magnet synchronous machine (PMSM) drive is one of best choices for a full range of motion control applications. For example, the PMSM is widely used in robotics, machine tools, actuators, and it is being considered in high-power applications such as industrial drives and vehicular propulsion. The PMSM shown here is of 48V, 1.5hp rated and is working for three wheeler EV applications.
DSO:
This Tektronix TPS 2024b model DSO has 4 fully isolated and floating channels, plus impedance isolated external trigger input and 200MHz bandwidth. It also has 2Gsps sample rate, can be used for analyzing the performance of many power electronic applications.
BLDC Hub Motor:
The most common use of this kind of BLDC hub motor is for two wheeler EV applications. The BLDC hub motor shown here is of 36V, 250W rated and is working for two wheeler EV applications.
Battery Bank:
Lithium-ion battery pack 360V/11Ah (Consisting of 36 Nos. of Li-ion battery 12V/11Ah).
DSP Microcontroller:
DSP development board TMS320F28335, High-performance static CMOS technology,Up to 150 MHz (6.67-ns cycle time), 1.9-V/1.8-V core, 3.3-V I/O design,High-performance 32-bit CPU (TMS320C28x),IEEE 754 single-precision Floating-Point Unit (FPU) (F2833x only),16 × 16 and 32 × 32 MAC operations, 16 × 16 dual MAC, Six-channel DMA controller (for ADC, McBSP, ePWM, XINTF, and SARAM),16-bit or 32-bit External Interface (XINTF)
AC/DC Current Probe:
A622 Tektronics, S/N 12PP53101DV, 0-70A RMS, 100A Peak AC and DC, Frequency 100KHz.
Google Sites
Report abuse