Embedded Files
PMI Block
PMI Block
The goal of this project was to increase familiarity with and practice the use of the Bandsaw and Drill Press, in preparation for future assignments. The goal was to replicate a PMI block out of a provided piece of Walnut wood. Shown here is the Result, as well as pictures of the construction process. As a note, the picture of my use of the bandsaw is from a slightly earlier project, yet one with the same general goal, which is the reason I have included it here.
Bandsaw Box
Bandsaw Box
A bandsaw box is a specific design that uses the unique flexibility of the bandsaw to form a box out of a single piece of wood, or several pieces of wood that have been glued together. By making strategic cuts with the grain of the wood, it is possible to create a high-quality finished item, with nearly indiscernible marks from the cutting and construction process.
Wooden Engineering 16-17.pdfDesign Prompt
Design Prompt
Design Drawings
Design Drawings
Box Cuts.pdfDrawer Cuts.pdfConstruction 1.pdfConstruction 2.pdfConstruction Photos
Construction Photos
Shows everything from the initial cuts with the miter saw to the engraving and completed box.
Engineering Notebook Entries
Engineering Notebook Entries
Are not currently available due to pictures being in a format that cannot be used by Google. This situation is currently being rectified.
Page updated
Google Sites
Report abuse