Applications: cooling systems, supply of drinking water, desalination plants, plant constructions e.g. in pipelines, on pumps, as dismantling joints, on condensers and vessels

Design: hydrodynamic and elastic bellows with single arch and with full faced rubber flanges, embedded reinforcement ring, with/without vacuum support ring depending on a operating conditions

Rubber materials: EPDM, Neopren, Nitril, Hypalon, Natural, Buthyl HT, EPDM HT, EPDM WRAS

Accessories: Flanges an counter flanges with/without fasteners, control units (tie rods including nuts and washers, hinge, etc.), inner sleeve, protective covers or safety hood

Other flange drillings on request

Applications: cooling systems, supply of drinking water, desalination plants, plant constructions e.g. in pipelines, on pumps, as dismantling joints, on condensers and vessels

Design: hydrodynamic and elastic bellows with single arch and with full faced rubber flanges, embedded reinforcement ring, with/without vacuum support ring depending on a operating conditions

Rubber materials: EPDM, Neopren, Nitril, Hypalon, Natural, Buthyl HT, EPDM HT, EPDM WRAS

Accessories: Flanges an counter flanges with/without fasteners, control units (tie rods including nuts and washers, hinge, etc.), inner sleeve, protective covers or safety hood

Other flange drillings on request

Applications: cooling systems, supply of drinking water, desalination plants, plant constructions e.g. in pipelines, on pumps, as dismantling joints, on condensers and vessels

Design: hydrodynamic and elastic bellows with single arch and with full faced rubber flanges, embedded reinforcement ring, with/without vacuum support ring depending on a operating conditions

Rubber materials: EPDM, Neopren, Nitril, Hypalon, Natural, Buthyl HT, EPDM HT, EPDM WRAS

Accessories: Flanges an counter flanges with/without fasteners, control units (tie rods including nuts and washers, hinge, etc.), inner sleeve, protective covers or safety hood

Other flange drillings on request

Applications: cooling systems, supply of drinking water, desalination plants, plant constructions e.g. in pipelines, on pumps, as dismantling joints, on condensers and vessels

Design: hydrodynamic and elastic bellows with single arch and with full faced rubber flanges, embedded reinforcement ring, with/without vacuum support ring depending on a operating conditions

Rubber materials: EPDM, Neopren, Nitril, Hypalon, Natural, Buthyl HT, EPDM HT, EPDM WRAS

Accessories: Flanges an counter flanges with/without fasteners, control units (tie rods including nuts and washers, hinge, etc.), inner sleeve, protective covers or safety hood

Other flange drillings on request

Applications: cooling systems, supply of drinking water, suspension conveyance pipelines, on pumps and vessels

Design: conical bellows (concentric taper/reducer) with full faced rubber flanges, embedded stainless steel wire

Rubber materials: EPDM, Neopren, Nitril, Hypalon, Natural, Buthyl HT, EPDM HT, EPDM WRAS

Accessories: Flanges an counter flanges with/without fasteners, control units (tie rods including nuts and washers, hinge, etc.), inner sleeve, protective covers or safety hood

Other flange drillings on request

Applications: paper industry and another using of abrasive medium, protecting equipment against vibrations, food industry, plant construction, pipeline with pumps and vessels

Design: hydrodynamic cylindrical rubber bellows-hose with full faced rubber flanges, with/without stainless steel wire

Rubber materials: EPDM, Neopren, Nitril, Hypalon, Natural, Buthyl HT, EPDM HT, EPDM WRAS

Accessories: Flanges an counter flanges with/without fasteners, control units (tie rods including nuts and washers, hinge, etc.), inner sleeve, protective covers or safety hood

Other flange drillings on request

Applications: waste water piping, cooling systems, industrial plants, ventilation plants, purification plants, food industry, facilities including disconnect pipelines, etc.

Design: hydrodynamic sleeve with single arch rubber bellows for clamped fixing, embedded reinforcement ring

Rubber materials: EPDM, Neopren, Nitril, Hypalon, Natural, Buthyl HT, EPDM HT, EPDM WRAS

Accessories: covers or safety hood

Applications: paper industry and another using of abrasive medium, protecting equipment against vibrations, food industry, plant construction, pipeline with pumps and vessels

Design: cylindrical rubber sleeve – hose, with/without stainless steel wire, for clamped fixing

Rubber materials: EPDM, Neopren, Nitril, Hypalon, Natural, Buthyl HT, EPDM HT, EPDM WRAS

Accessories: protective covers or safety hood

Allowable overpressure (PN) :-10bar-flangePN10 & 16bar-flangePN16

Damping of pressure at Temperature :- up to 70°C 100% PN

at 70°C – 100°C 70% PN

Test pressure:-1,5-fold PN

Burst pressure :-3-fold PN

Vacuum stability pabs :-DN32 – DN150 0,6bar at tR

DN200 – DN500 0,8bar at tR

Max recommended Torque:- DN32 – DN40 30Nm DN65 – DN100 40Nm DN125 – DN150 60Nm

DN200 – DN350 100Nm

DN400 – DN500 120Nm

Other flange drillings on request

Allowable overpressure (PN):-10 bar flanges PN10 & 16 bar flanges

PN16

Damping of pressure at Temperature:- up to 70°C 100% PN

at 70°C – 100°C 70% PN

Test pressure:-1,5-fold PN

Burst pressure:-3-fold PN

Vacuum stability pabs. :-DN32 – DN150 0,6bar at tR

DN200 – DN500 0,8bar at tR

Max recommended Torque:- DN32 – DN40 30Nm

DN50 – DN100 40Nm

DN125 – DN150 60Nm

DN200 – DN350 100Nm

DN400 – DN500 120Nm

Other flange drillings on request

Allowable overpressure (PN) :-10 bar flanges PN10 & 16 bar flanges PN16

Damping of pressure at Temperature :-up to 70°C 100% PN

at 70°C – 100°C 70% PN

Test pressure :-1,5-fold PN

Burst pressure:-4 x PN at tR / 3 x PN at 100°C

Vacuum resistance :-DN32 – DN500 760mmHg

Temperature:--10°C / 100°C

Max recommended Torque :-DN40 - DN50 60Nm

DN65 - DN80 80Nm

DN100 - DN125 60Nm

DN150 - DN500 140Nm

Other flange drillings on request

Allowable overpressure (PN) :-10 bar flanges PN10 & 16 bar flanges PN16

Damping of pressure at Temperature :-up to 70°C 100% PN

at 70°C – 100°C 70% PN

Test pressure:-1,5-fold PN

Burst pressure :-4 x PN at tR / 3 x PN at 100°C

Vacuum resistance :-DN40 – DN250 400mmHg

DN300 – DN 500 300 mmHG

Max recommended Torque :-DN40 - DN50 60Nm

DN65 - DN80 80Nm

DN100 - DN125 60Nm

DN150 - DN500 140Nm

Temperature:- -10°C / 100°C

Other flange drillings on request

Test pressure :-1,5-fold PN

Burst pressure :-4 x PN at tR / 3 x PN at 100°C

Temperature :--10°C / 100°C

Damping of pressure at Temperature :-up to 70°C 100% PN

at 70°C – 100°C 70% PN

Vacuum resistance:-630mmHg

Max recommended Torque:-DN40 - DN50 60Nm

DN65 - DN80 80Nm

DN100 - DN125 100Nm

DN150 – DN200 160Nm

DN250 – DN400 180Nm

DN450 - DN500 200Nm

Other flange drillings on request

Allowable overpressure (PN) :-DN600-DN2000 6bar

Test pressure:-1,5-fold PN

Burst pressure:-3-fold PN

Damping of pressure at Temperature:-up to 70°C 100% PN

at 70°C – 100°C 70% PN

Vacuum stability pabs.:-DN600-DN2000 0,1bar up to 60°C

Temperature :--10°C / 100°C

Tolerances :-acc. DIN 7715

Other flange drillings on request

Allowable overpressure (PN) :-DN600-DN1800 6bar

Damping of pressure at Temperature:-up to 70°C 100% PN

at 70°C – 100°C 70% PN

Test pressure:-1,5-fold PN

Burst pressure :-3-fold PN

Vacuum stability pabs :-DN600-DN2000 0,1bar up to 60°C

Temperature:--10°C / 120°C

Tolerances :-acc. DIN 7715

Other flange drillings on request