A comprehensive tool to create parametric windows and position them on the wall in the right position.
Using: Snapping & UCS, LwCad modifier
The window can be generated using basic parts:
glass table
inner frame
outer frame
sill
This tool uses two separate preset systems, first to store window sizes and the other to store window parameters.
Drill Mode - defines how the depth of the hole in the wall will be calculated
Drill Depth - user-defined value of hole depth in the wall, when drill mode is set to: User
Window Offset - position the window in the wall along the wall thickness
Size Preset - library of window size dimensions
Width - vertical size of the window
Height - horizontal size of the window
Show Dimension - displays the dimensions of the tool
Window Preset - library of window parameters
Side Per Seg - detail level for polygon mode
Glass-Frame Surfaces - creates a separate material for glass and frames
H Count - number of horizontal divisions
V Count - number of vertical divisions
Top - the shape of the top edge of the window
Top Slope - the slope of the top edge of the window
Glass - enable the generation of a glass pane
Thickness - glass thickness (if thickness is zero only flat polygon is generated)
Inner Frame - enable the creation of an inner frame of the window
Size - dimension of the frame
Depth - dimension of the frame along depth of the wall
Outer Frame - enable the creation of an outer frame of the window
Size - dimension of the frame
Depth - dimension of the frame along depth of the wall
Depth From - method of calculating the depth
Sill - enable the creation of sill
Height - thickness of the sill
Side Extend - sill extension on the sides
Depth - dimension of the sill along depth of the wall
Depth From - method of calculating the depth