Book Chapters
Book Chapters
2. G. Youssef, B. Koohbor. Chapter 16-Preparation, characterization, and applications of polyurea foams, In: Polyurea - Synthesis, Properties, Composites, Production, and Applications, P. Pasbakhsh, D. Mohotti, K. Palaniandy, S. Auckloo (editors), Elsevier, 2023
1. B. Koohbor, G. Youssef. Chapter 9- Polymeric foams and their nanocomposite derivatives for shock absorption, In: Multifunctional Polymeric Foams - Advancements and Innovative Approaches, S. C. George & B. P. Resmi (editors), CRC Press, 2023
1. B. Koohbor, G. Youssef. Chapter 9- Polymeric foams and their nanocomposite derivatives for shock absorption, In: Multifunctional Polymeric Foams - Advancements and Innovative Approaches, S. C. George & B. P. Resmi (editors), CRC Press, 2023
Peer-Reviewed Journal Publications
Peer-Reviewed Journal Publications
* MOAM Lab member
2024
96. C. Rufo-Martín, D Infante-García, J. Díaz-Álvarez. M. H. Miguélez, B. Koohbor. G. Youssef. Mechanistic Exploration of Topology-inspired Additive-enabled Monostructures. 2024 (under review)
95. N. B. Mennie*, N. K. Singh*, I. Nault, F. M. Haas, B. Koohbor. Computational analysis of cold spraying polymer-coated metallic particles on fiber-reinforced polymer substrates. 2024 (under review)
94. B. Huffman, A. Singh, B. Koohbor, G. Youssef. Additive Manufacturing and Mechanics of Mathematically-generated Meta-structures. 2024 (under review)
93. B. Koohbor, K. Z. Uddin*, M. Heras*, G. Youssef, D. Miller, S. Sockalingam, M. A. Sutton, T. Kiel. Strain rate sensitivity of rotating-square auxetic metamaterials. 2024 (under review)
92. K. Z. Uddin*. H. Girard, N. B. Mennie*, A. Doitrand, B. Koohbor. Simultaneous measurement of fiber-matrix interface debonding and tunneling using a dual-vision experimental setup. 2024 (under review)
91. H. Girard, A. Doitrand, B. Koohbor, R. G. Linardi, N. Godin, J. Bikard. Comparison between 2D and 3D fiber-matrix debonding simulation for inverse identification of interface fracture properties. 2024 (under review)
90. K. Z. Uddin*, M. Heras*, G. Youssef, B. Koohbor. Nonlinear mechanics and auxeticity of mechanical metamaterials with rotating squares. 2024 (under review)
89. A. R. Khan, K. Z. Uddin*, A. Ali, B. Koohbor, Y. Mehta. Characterizing the fatigue and thermal cracking performance of fiber-reinforced asphalt mixtures using digital image correlation. 2024 (under review)
88. M. Smeets, B. Koohbor, G. Youssef. The Impact efficacy of density-graded polyurea elastomeric foams. 2024 (under review)
87. K. Z. Uddin*, H. A. Nguyen, T. T. Nguyen, M. Trkov, G. Youssef, B. Koohbor. In-plane density gradation of shoe midsoles for optimized cushioning performance. 2024 (under review)
86. B. Koohbor, W. Xue, K. Z. Uddin*, G. Youssef, D. Nerbetski*, B. Steiger*, J. Kenney*, D. Yarem*. Fabrication and Characterization of Electrically Conductive 3D Printable TPU/MWCNT Filaments for Strain Sensing in Large Deformation Conditions. Advanced Sensor Research 2024 (Accepted)
85. A. Singh, B. Koohbor, G. Youssef. Full-field Characterizations of Additively Manufactured Composite Cellular Structures. Composites Part B 2024; 272: 111208.
84. P. Kauvaka, M. Smeets, B. Koohbor. G. Youssef. Impact response of polyurea elastomeric foams. Journal of Dynamic Behavior of Materials 2024 (Accepted)
83. I. A. Anni*, M. S. Kaminskyj, K. Z. Uddin*, J. F. Stanzione III, F. M. Haas, B. Koohbor. Repair of damaged fiber reinforced polymer composites with cold Spray. Journal of Thermal Spray Technology 2024 (Accepted)
82. H. Girard, A. Doitrand, B. Koohbor, R. G. Rinaldi, N. Goldin, D. Long, J. Bikard. Influence of nearby fiber on fiber-matrix debonding: Coupled Criterion prediction and debonding shape determination. Journal of the Mechanics and Physics of Solids 2024; 183: 105498.
81. A. Singh, V. Ngo, N. U. Huynh, B. Koohbor, G. Youssef. Structural performance of additively manufactured composite lattice structures: Strain rate, cell geometry, and weight ratio effects. Advanced Engineering Materials 2024; 26(2): 2301431.
2023
80. M. Smeets, P. Kauvaka, K. Z. Uddin*, B. Koohbor, G. Youssef. Full-field analyses of density-graded elastomeric foams under quasi-static and impact loadings. Advanced Engineering Materials 2023; 25(24): 2300994.79. K. Z. Uddin*, I. A, Anni*, G. Youssef, B. Koohbor. Modulating Poisson’s ratio in flexible honeycombs by density and architecture gradations. IOP Engineering Research Express 2023; 5: 045007.
78. N. Pagliocca*, M. Trkov, B. Koohbor. Modular soft robotic actuators from flexible perforated sheets. Advanced Engineering Materials 2023; 25: 2300583.
77. I. A. Anni*, M. S. Kaminskyj, K. Z. Uddin*, T. Bacha, N. K. Singh*, J. F. Stanzione III, F. M. Haas, B. Koohbor. Cold spray deposition of nylon 6 on glass fiber reinforced composites. ACS Applied Engineering Materials 2023; 1: 2324–2335.
76. H. Girard, A. Doitrand, B. Koohbor, R. G. Rinaldi, N. Godin, D. Long, J. Nikard, L. Trouillet-Fonti. Numerical simulation of fiber-matrix debonding: inverse identification of interface properties. Engineering Fracture Mechanics 2023; 286: 109254.
75. H. Girard, B. Koohbor, A. Doitrand, R. Livingston*. Experimental characterization of in-plane debonding at fiber-matrix interface using single glass macro fiber samples. Composites Part A 2023; 171: 107573.
74. M. Smeets, B. Koohbor, G. Youssef. Quasi-static mechanical response of density-graded polyurea elastomeric foams. ACS Applied Polymer Materials 2023; 5: 2840–2851.
73. S. Nacy, B. Koohbor, G. Youssef. Frequency-domain analyses of low-velocity impact loading of elastomeric foams. Mechanical Systems and Signal Processing 2023; 205: 110881.
72. L. K. Bhaskar, J. Rapp, A. Nandi, A. K. Biswal, K. Z. Uddin*, B. Koohbor, R. Kumar, A. Vashisth. Out-of-oven rapid synthesis of entropy stabilized oxides using radio frequency heating. Journal of Materials Research and Technology 2023; 24: 1150-1161.
71. I. A. Anni*, M. S. Kaminskyj, K. Z. Uddin*, T. Bacha, N. K. Singh*, J. F. Stanzione III, F. M. Haas, B. Koohbor. Thermoplastic coating on fiber reinforced polymer composites by cold spray additive manufacturing. Materials Today Communication 2023; 35: 105650.
70. N. U. Hyunh, B. Koohbor, G. Youssef. Light-matter interactions revealing load-induced phase mobility in elastomers. Macromolecular Rapid Communications 2023; 44(7): 2200725.
69. J. Muthulingam*, A. G. Padmanaban, N. K. Singh, T. W. Bacha, J. F. Stanzione III, F. M. Haas, R. Jha, J-H. Lee, B. Koohbor. Molecular weight controls interactions between plastic deformation and fracture in cold spray of glassy polymers. ACS Omega 2023; 8: 3956-3970.
68. G. Youssef, Y. Kokash, K. Z. Uddin*, B. Koohbor. Density-dependent impact-resilience and auxeticity of elastomeric polyurea foams. Advanced Engineering Materials 2023; 25(1): 2370001.
67. K. Z. Uddin*, N. Pagliocca*, I. A. Anni*, G. Youssef, B. Koohbor. Multiscale strain field characterization in flexible planar auxetic metamaterials with rotating squares. Advanced Engineering Materials 2023; 25: 2201248.
66. N. U. Hyunh, B. Koohbor, G. Youssef. Localized creep analysis of polyurea elastomer from full-field measurements. Mechanics of Time-Dependent Materials 2023; 27: 727-741.
2022
65. K. Z. Uddin*, I. A. Anni*, G. Youssef, B. Koohbor. Tuning the mechanical behavior of density graded elastomeric foam structures via interlayer properties. ACS Omega 2022; 7(42): 37189-37200.64. J. Mahon, N. Pagliocca*, V. Harnack, B. Koohbor, L. Yu, X. Hu, R. Krchnavek, W. Xue. Mechanics of dielectric polyamide/SiO2 nanocomposite coatings for cryogenic service in superconductor systems. Journal of Applied Polymer Science 2022; 139(44): e53097.
63. A. G. Padmanaban, T. W. Bacha, J. Muthulingam*, F. M. Haas, J. F. Stanzione III, B. Koohbor, J-H. Lee. Molecular-weight-dependent interplay of brittle-to-ductile transition in high-strain-rate cold spray deposition of glassy polymers. ACS Omega 2022; 7: 26465-26472.
62. S. Malley, C. Reina, S. Nacy, J. Gilles, B. Koohbor, G. Youssef. Predictability of mechanical behavior of additively manufactured particulate composites using machine learning and data-driven approaches. Computers in Industry 2022; 142: 103739.
61. B. Koohbor, C. Montgomery, N. R. Sottos. Identification of RVE length scale in fiber composites via combined optical and SEM digital image correlation. Composites Science and Technology 2022; 227: 109613.
60. N. Pagliocca*, G. Youssef, B. Koohbor. In-plane mechanical and failure responses of honeycombs with syntactic foam cell walls. Composite Structures 2022; 295: 115866.
59. J. Mahon, N. Pagliocca*, V. Harnack, B. Koohbor, R. Krchnavek, W. Xue. Design and implementation of a thin film tensile testing apparatus for cryogenic applications. Experimental Techniques 2022 (Accepted)
58. I. A. Anni*, K. Z. Uddin*, N. Pagliocca*, N. Singh*, O. Rahman*, G. Youssef, B. Koohbor. Out-of-plane load-bearing and mechanical energy absorption properties of flexible density-graded honeycombs. Composites Part C 2022; 8: 100284.
57. B. Koohbor, G. Youssef, K. Z. Uddin*, Y. Kokash. Dynamic behavior and impact tolerance of elastomeric foams subjected to multiple impact conditions. Journal of Dynamic Behavior of Materials 2022; 8: 359-370.
56. P. J. Centellas, M. Yourdkhani, S. Vyas, B. Koohbor, P. H. Geubelle, N. R. Sottos. Rapid multiple-front polymerization of fiber-reinforced polymer composites. Composites Part A: Applied Science and Manufacturing 2022; 158: 106931.
55. B. Ozdogru, S. Padwal, B. Bal, S. Harimkar, B. Koohbor, Ö. Ö. Çapraz. The Coupling between voltage profiles and mechanical deformations in LAGP solid electrolyte during Li plating and stripping. ACS Applied Energy Materials 2022; 5(3): 2655-2662.
54. R. Liu, M. Vail, B. Koohbor, C-S. Tang, H. Xu, X-C. Shi, C. Zhu. Image-based characterization of desiccation cracking in clayey soils treated by bottom ash. Bulletin of Engineering Geology and the Environment 2022; 81: 139.
53. N. Pagliocca*, K. Z. Uddin*, I. A. Anni*, C. Shen, G. Youssef, B. Koohbor. Flexible planar metamaterials with tunable Poisson's ratios. Materials & Design 2022; 215: 110446.
52. N. K. Singh*, K. Z. Uddin*, J. Muthulingam*, R. Jha, B. Koohbor. A modeling study of bonding mechanisms between similar and dissimilar materials in cold spraying on polymeric substrates. Journal of Thermal Spray Technology 2022; 31: 508–524.
51. R. Livingston*, B. Koohbor. Characterizing fiber-matrix debond and fiber interaction mechanisms by full-field measurements. Composites Part C: Open Access 2022; 7: 100229.
50. O. Rahman*, K. Z. Uddin*, J. Muthulingam*, G. Youssef, C. Shen, B. Koohbor. Density-graded cellular solids: Mechanics, fabrication, and applications. Advanced Engineering Materials 2022; 24: 2100646.
49. B. Ozdogru, B. Koohbor, Ö. Ö. Çapraz. The Impact of Alkali-ion Intercalation on Redox Chemistry and Mechanical Deformations: Case Study on Intercalation of Li, Na and K Ions into FePO4 Cathode. Electrochemical Science Advances 2022; 2(4): e2100106
2021
48. T. Bacha, N. K. Singh*, I. Nault, B. Koohbor, F. Haas, J. Stanzione. Thermal gradients govern impact dynamics in thermoplastic polymer cold spray. Journal of Thermal Spray Technology 2021; 30: 2034-2049.47. B. Koohbor, N. Pagliocca*, G. Youssef. A Multiscale Experimental Approach to Characterize Micro-to-Macro Transition length scale in Polymer Foams. Mechanics of Materials 2021; 161: 104006.
46. N. K. Singh*, K. Z. Uddin*, J. Muthulingam*, R. Jha, B. Koohbor. Analyzing the Effects of Particle Diameter in Cold Spraying of Thermoplastic Polymers. Journal of Thermal Spray Technology 2021; 30: 1226-1238.
45. M. Raeisinezhad, N. G. Pagliocca*, B. Koohbor, M. Trkov. Design Optimization of a Pneumatic Soft Robotic Actuator Using Model-based Optimization and Deep Reinforcement Learning . Frontiers in Robotics and AI 2021; 8: 107.
44. B. Koohbor, S. Ravindran, A. Kidane. In situ deformation characterization of density-graded foams in quasi-static and impact loading conditions. International Journal of Impact Engineering 2021; 150: 103820 .
43. B. Koohbor, A. Blourchian, K. Z. Uddin*, G. Youssef. Characterization of energy absorption and strain rate sensitivity of a novel elastomeric polyurea foam. Advanced Engineering Materials 2021; 23(1): 2000797.
42. B. Koohbor, L. Sang, Ö. Ö. Çapraz, A. Gewirth, N. R. Sottos. In Situ Strain Measurement in Solid-State Li-ion Battery Electrodes. Journal of the Electrochemical Society 2021; 168: 010516.
2020
41. O. Rahman*, B. Koohbor. Optimization of energy absorption performance of polymer honeycombs by density gradation. Composites Part C 2020; 3: 100052.40. K. Z. Uddin*, G. Youssef, M. Trkov, H. Seyyedhosseinzadeh, B. Koohbor. Gradient optimization of multi-layered density-graded foam laminates for footwear material designs. Journal of Biomechanics 2020; 109: 109950.
39. K. Z. Uddin*, B. Koohbor. Gradient optimization of transversely graded Ti-TiB structures for enhanced fracture resistance. International Journal of Mechanical Sciences 2020; 187: 105917.
38. B. Koohbor, N. K. Singh*, A. Kidane. Radial and axial inertia stresses in high strain rate deformation of polymer foams. International Journal of Mechanical Sciences 2020; 181: 105679.
2019
37. B. Koohbor, M. Rohanifar, A. Kidane. Characterizing Fracture Response of Cracked Transversely Graded Materials. Composite Structures 2019 ; 229: 111439.36. C. B. Montgomery, B. Koohbor, N. R. Sottos. A robust patterning technique for electron microscopy-based digital image correlation at sub-micron resolutions. Experimental Mechanics 2019; 59: 1063-1073.
2018
35. A. Tessema, W. Mitchell, B. Koohbor, S. Ravindran, M. Van Tooren, A. Kidane. The effect of nano-fillers on the in-plane and interlaminar shear properties of carbon fiber reinforced composite. Journal of Dynamic Behavior of Materials 2018; 4: 296-307.34. P. Malchow, B. Koohbor, S. Ravindran, A. Kidane. In-situ quantification of intra and intergranular deformation in pure magnesium using full-field measurements at low and high strain rates. Mechanics of Materials 2018; 126: 36-46.
33. B. Koohbor, S. Ravindran, A. Kidane. A multiscale experimental approach for correlating global and local deformation response in woven composites. Composite Structures 2018; 194: 328-334.
32. S. Ravindran, B. Koohbor, P. Malchow, A. Kidane. Experimental characterization of compaction wave propagation in cellular polymers. International Journal of Solids and Structures 2018; 139-140: 270-282.
31. B. Koohbor, A. Kidane, M. A. Sutton, X. Zhao, S. Mallon. Corrigendum to “Analysis of dynamic bending test using ultra high speed DIC and the virtual fields method” [Int. J. Impact Eng. 110 (2017) 299-310, http://dx.doi.org/10.1016/j.ijimpeng.2016.12.021] 2018, 116: 127-128.
30. B. Koohbor, S. Ravindran, A. Kidane. Effects of cell-wall instability and local failure on the response of closed-cell polymeric foams subjected to dynamic loading. Mechanics of Materials 2018; 116: 67-76.
2017 and before
29. B. Koohbor, A. Kidane, M. A. Sutton, X. Zhao, S. Mallon. Analysis of dynamic bending test using ultra high speed DIC and the Virtual Fields Method. International Journal of Impact Engineering 2017; 110: 299-310.28. G. Valeri, B. Koohbor, A. Kidane, M. A. Sutton. Determining the tensile response of materials at high temperature using DIC and the Virtual Fields Method. Optics and Lasers in Engineering 2017; 91: 53-61.
27. S. Ravindran, B. Koohbor, A. Kidane. Experimental characterization of meso-scale deformation mechanisms and the RVE size in plastically deformed polycrystalline materials. Strain 2017: 53(1): e12217.
26. B. Koohbor, K. Moaven. Finite element modeling of thermal aspects in high speed cold strip rolling. Proceedings of the Institution of Mechanical Engineers – Part B: Journal of Engineering Manufacture 2017; 231(8): 1350-1362.
25. B. Koohbor, S. Ravindran, A. Kidane. Experimental determination of the length scales of representative volume element (RVE) in woven composites. Optics and Lasers in Engineering 2017; 90: 59-71.24. B. Koohbor, A. Kidane, Lu W. Effect of specimen size, compressibility and inertia on the response of rigid polymer foams subjected to high velocity direct impact loading. International Journal of Impact Engineering 2016: 98; 62-74.
23. B. Koohbor, A. Kidane, W. Lu. Characterizing the constitutive response and energy absorption of rigid polymeric foams subjected to intermediate velocity impact. Polymer Testing 2016; 54: 48-58.
22. B. Koohbor, A. Kidane. Design optimization of continuously and discretely graded foam materials for efficient energy absorption. Materials and Design 2016; 102: 151-161.
21. B. Koohbor, S. Ravindran, A. Kidane. Meso-scale study on non-linear tensile response and fiber trellising mechanisms in woven composites. Journal of Reinforced Plastics and Composites 2016; 35(12): 986-995.
20. B. Koohbor, A. Kidane, W. Y. Lu, M. A. Sutton. Investigation of the dynamic stress-strain response of compressible polymeric foam using a non-parametric analysis. International Journal of Impact Engineering 2016; 91: 170-182.
19. B. Koohbor, S. Mallon, A. Kidane, A. Anand, V. Parameswaran. Through thickness elastic profile determination of functionally graded materials. Experimental Mechanics 2015; 55: 1427-1140.
18. S. Mallon, B. Koohbor, A. Kidane, A. P. Reynolds. On the effect of microstructure on the torsional response of AA7050-7651 at elevated strain rates. Materials Science and Engineering A 2015; 639: 280-287.
17. F. Khodabakhshi, M. Haghshenas, H. Eskandari, B. Koohbor. Hardness-strength relationships in fine and ultra-fine grained metals processed through constrained groove pressing. Materials Science and Engineering A 2015; 636: 331-339.
16. B. Koohbor, S. Mallon, A. Kidane, W. Y. Lu. The deformation and failure response of closed-cell PMDI foams subjected to dynamic impact loading. Polymer Testing 2015; 44: 112-124.
15. B. Koohbor, S. Ravindran, A. Kidane. Meso-scale strain localization and failure response of an orthotropic woven glass-fiber reinforced composite. Composites Part B: Engineering 2015; 78: 308-318.
14. B. Koohbor. Finite element modeling of thermal and mechanical stresses in work-rolls of warm strip rolling. Proceedings of the Institute of Mechanical Engineers – Part B: Journal of Engineering Manufacture 2015; 230(6): 1076-1086.
13. S. Mallon, B. Koohbor, A. Kidane and M. A. Sutton. Fracture behavior of prestressed composites subjected to shock loading: a DIC-based study. Experimental Mechanics 2015; 55: 211-225. 12. B. Koohbor, A. Kidane, S. Mallon. Effect of elastic properties of material composition on the fracture response of transversely graded ceramic/metal material. Materials Science and Engineering A 2014; 619: 281-289.
11. B. Koohbor, S. Mallon, A. Kidane, M. A. Sutton. A DIC-based study of in-plane mechanical and quasi-static fracture response of orthotropic carbon fiber reinforced composites. Composites Part B: Engineering 2014; 66: 388-399.
10. B. Koohbor. On the influence of rolling path change on static recrystallization behavior of commercial purity aluminum. International Journal of Material Forming 2014; 7: 53-63. 9. R. Siavash Moakhar, M. Mehdipour, M. Ghorbani, M. Mohebali, B. Koohbor. Investigation of the failure in boilers economizer tubes used in power plants. Journal of Materials Engineering and Performance 2013; 22: 2691-2697.
8. B. Koohbor, D. Ohadi. On the influence of deformation rate and cooling media on the static strain aging of a warm rolled low carbon steel. International Journal of Material Forming 2013; 6: 417-422.
7. L. Khalili, S. Serajzadeh, B. Koohbor. Thermomechanical behavior of work rolls during warm strip rolling. Metallurgical and Materials Transactions B 2012; 43: 1638-1648.
6. M. S. Shahriary, B. Koohbor, A. A. Ekrami, K. Ahadi, M. K. Qomi, T. Izadyar. The effect of dynamic strain aging on room temperature mechanical properties of high martensite dual phase (HMDP) steel. Materials Science and Engineering A 2012; 550: 325-332.
5. B. Koohbor, S. Serajzadeh. Influence of deformation path change on static strain aging of cold rolled steel strip. International Journal of Advanced Manufacturing Technology 2012; 61: 901-909.
4. B. Koohbor, S. Serajzadeh. Thermo-mechanical behaviors of strip and work-rolls in cold rolling process. Journal of Strain Analysis for Engineering Design 2011; 46: 794-804.
3. B. Koohbor, S. Serajzadeh. Study on effect of residual stress distributions on kinetics of static strain aging after cold rolling. Materials Science and Technology 2011; 7: 1620-1627.
2. B. Koohbor, S. Serajzadeh. Kinetics of static strain aging after temper rolling of low carbon steels. Ironmaking and Steelmaking: Processes, Products and Applications 2011; 38: 314-320.
1. B. Koohbor, D. Ohadi, S. Serajzadeh, J. M. Akhgar. Effect of rolling speed on the occurrence of strain aging during and after warm rolling of low-carbon steel. Journal of Materials Science 2010; 45: 3405-3412.
Conference Proceedings
Conference Proceedings
42. H. Girard, Z. Hazaveh, B. Koohbor, A. Doitrand. Experimental-computational characterization of fiber-to-fiber interactions in glass macro fiber composites. In: Proceedings of the American Society for Composites 38th Technical Conference, 2023.
41. K. Z. Uddin, I. A. Anni, G. Youssef, B. Koohbor. Tuning load bearing capacities of flexible honeycomb with Poisson’s ratio modulation. In: Proceedings of the American Society for Composites 38th Technical Conference, 2023.
40. I. A. Anni, M. S. Kaminskyj, K. Z. Uddin, J. F. Stanzione III, F. M. Haas, B. Koohbor. Repair of damaged fiber reinforced polymer composites with cold spray. International Thermal Spray Conference (ITSC) Proceedings, 2023.
39. N. K. Singh, N. B. Mennie, I. Nault, B. Koohbor, F. M. Haas, R. Jha. Analyzing cold spray of polymer-coated metal particles on polymeric and composite substrates. International Thermal Spray Conference (ITSC) Proceedings, 2023.
38. J. Muthilingam, N. K. Singh, R. Jha, B. Koohbor. Modeling cold spray deposition of thermoplastic polymers: effects of impact angle and temperature. In: Proceedings of the American Society for Composites 37th Technical Conference, 2022.
37. J. Mahon, N. Pagliocca, V. Harnack, B. Koohbor, R. Krchnavek, W. Xue. Cost-effective tensile testing apparatus for characterization of thin films at cryogenic temperatures. Conference Proceedings of the Society for Experimental Mechanics, 2022.
36. Y. Kokash, K. Z. Uddin, B. Koohbor, G. Youssef. Impact efficacy of elastomeric foams. Conference Proceedings of the Society for Experimental Mechanics, 2022.
35. K. Z. Uddin, Y. Kokash, I. Anni, G. Youssef, B. Koohbor. Impact response analysis of functionally graded foams with different inter-laminar adhesives. Conference Proceedings of the Society for Experimental Mechanics, 2022.
34. N. Pagliocca, N. Singh, C. Montgomery, B. Koohbor. Characterization of debonding in macro-glass fiber systems using full-field measurements. Conference Proceedings of the Society for Experimental Mechanics, 2022.
33. N. K. Singh, K. Z., Uddin, R. Jha, B. Koohbor. Analyzing micro-macro transitional length scale in unidirectional composites. In: Proceedings of the American Society for Composites 36th Technical Conference, 2021.
32. R. Livingston, B. Koohbor. In-situ characterization of fiber-matrix interface debonding via full-field measurements. In: Proceedings of the American Society for Composites 36th Technical Conference, 2021.
31. J. Mahon, J. Cook, V. Harnack, N. Pagliocca, B. Koohbor, R. Krchnavek, W. Xue. Addressing cryogenic dielectric material challenges in high-temperature superconducting cables with polyamide/silica nanocomposite thin films. ASME IMECE 2021.
30. K. Z. Uddin, G. Youssef, M. Trkov, B. Koohbor. Midsole performance optimization by designing density-graded foams. 2020 Biomedical Engineering Society (BMES) Virtual Annual Meeting, San Diego, CA, 2020.
29. M. Raeisinezhad, N. Pagliocca, B. Koohbor, M. Trkov. IntelliPad: Intelligent soft robotic pad for pressure injury prevention. 2020 IEEE/ASME AIM International Conference on Advanced Intelligent Mechatronics, Boston, MA, 2020.
28. B. Koohbor, C. B. Montgomery, N. R. Sottos. Measuring statistically equivalent RVE size in fiber composites. SEM 2020 Annual Conference on Experimental and Applied Mechanics (virtual meeting), 2020.
27. X. Zhang, B. Koohbor, L. Dean, N. Sottos, J. Moore, P. Geubelle. Modeling of process-induced residual deformations in frontal polymerization based manufacturing of thermosetting polymer components. IMECE 2019 International Mechanical Engineering Congress and Exposition, Salt Lake, UT, 2019.
26. B. Koohbor, P. J. Centellas, N. Parikh, D. G. Ivanoff, N. R. Sottos. Thermo-mechanical characterization of composites fabricated via frontal polymerization. Conference Proceedings of the Society for Experimental Mechanics, 2019.
25. B. Koohbor, C. B. Montgomery, S. R. White, N. R. Sottos. Meso-scale strain measurements in fiber reinforced composites. In: Proceedings of the American Society for Composites 33rd Technical Conference, 2018.
24. B. Koohbor, L. Sang, Ö. Ö. Çapraz, A. Gewirth, R. G. Nuzzo, S. R. White, N. R. Sottos. In-situ strain measurement in solid-state Li-ion batteries. Conference Proceedings of the Society for Experimental Mechanics, 2018.
23. M. Yourdkhani, B. Koohbor, D. Ivanoff, L. Dean, C. Lamuta, P. Centellas, I. Robertson, S. White, N. Sottos. Thermo-mechanical Properties of Thermoset Polymers and Composites Fabricated by Frontal Polymerization. Conference Proceedings of the Society for Experimental Mechanics, 2018.
22. C. B. Montgomery, A. Klepacki, B. Koohbor, P. Geubelle, N. Sottos. Characterization of Transverse Deformation and Failure Initiation at the Fiber/Matrix Interface using DIC in a SEM. Conference Proceedings of the Society for Experimental Mechanics, 2018.
21. B. Koohbor, S. Ravindran, A. Kidane. Impact response of density graded cellular polymers. In: Conference Proceedings of the Society for Experimental Mechanics (Volume 1), J. Kimberley, L. Lamberson, S. Mates (Editors) Springer 2018, pp: 17-23.
20. S. Ravindran, B. Koohbor, P. Malchow, A. Kidane. Compaction wave characteristics of polymer foams under dynamic loading. In: Conference Proceedings of the Society for Experimental Mechanics (Volume 1), J. Kimberley, L. Lamberson, S. Mates (Editors) Springer 2018, pp: 175-180.
19. S. Ravindran, B. Koohbor, A. Kidane. Experimental investigation of compaction wave propagation in cellular polymers. In: Conference Proceedings of the International Digital Image Correlation Society. M. Sutton, P. Reu (Editors), Springer 2017, pp: 113-115.
18. B. Koohbor, A. Kidane. Meso-scale constitutive response of woven composites subjected to large deformation. In: Proceedings of the American Society for Composites 31st Technical Conference, 2016.
17. B. Koohbor, A. Kidane, W. Lu. Characterizing the energy absorption of rigid polymeric foams under compressive direct impact loading. In: Proceedings of the American Society for Composites 31st Technical Conference, 2016.
16 B. Koohbor, A. Tessema, S. Ravindran, A. Kidane. Understanding the damage mechanisms in composites based on local deformation measurements. 12th International Conference on Durability of Composite Systems DURACOSYS 2016.
15. B. Koohbor, A. Kidane, W. Y. Lu, R. Patel. Specimen size effect on stress-strain response of foams under direct impact. In: Conference Proceedings of the Society for Experimental Mechanics (Volume 1) D. Casem, L. Lamberson, J. Kimberley (Editors), Springer 2017, pp: 253-261.
14. G. Valeri, B. Koohbor, A. Kidane, M. A. Sutton, H. Schreier. Investigating the tensile response of materials at high temperature using DIC. In: Conference Proceedings of the Society for Experimental Mechanics (Volume 3) S. Yoshida, L. Lamberti, C. Sciammarella (Editors), Springer 2017, pp: 77-82.
13. B. Koohbor, A. Kidane, M. A. Sutton, X. Zhao. Analysis of dynamic bending using DIC and Virtual Fields Method. In: Conference Proceedings of the Society for Experimental Mechanics (Volume 3) S. Yoshida, L. Lamberti, C. Sciammarella (Editors), Springer 2017, pp: 143-150.
12. B. Koohbor, A. Kidane, W. Y. Lu. Dynamic flow response of rigid polymer foam subjected to direct impact. In: Conference Proceedings of the Society for Experimental Mechanics (Volume 1) B. Song, L. Lamberson, D. Casem, J. Kimberley (Editors), Springer 2016, pp: 163-170.
11. B. Koohbor, G. Valeri, A. Kidane, M. A. Sutton. Thermo-mechanical properties of metals at elevated temperatures. In: Conference Proceedings of the Society for Experimental Mechanics (Volume 3) H. Jin, S. Yoshida, L. Lamberti, M. Lin (Editors), Springer 2016, pp: 117-123.
10. A. Tessema, R. W. Mitchell, B. Koohbor, S. Ravindran, A. Kidane, M. Van Tooren. On the mechanical response of polymer fiber composites reinforced with nanoparticles. In: Conference Proceedings of the Society for Experimental Mechanics (Volume 3) H. Jin, C. Sciammarella, S. Yoshida, L. Lamberti (Editors), Springer 2016, pp: 409-414.
9. A. Kidane, B. Koohbor, S. Ravindran. Experimental Study on Meso-Scale Deformation Response of Orthotropic Woven Composites Subjected to Tensile Loading. ASME 2016 International Mechanical Engineering Congress and Exposition, Phoenix, AZ, November 2016.
8. B. Koohbor, S. Ravindran, A. Kidane. Experimental study of the meso-scale heterogeneous deformation response of polymer composites. Proceedings of the American Society for Composites 30th Technical Conference, 2015.
7. B. Koohbor, A. Kidane, W. Y. Lu. Dynamic compressive response of polymeric foams subjected to direct impact loading. Proceedings of the American Society for Composites 30th Technical Conference, 2015.
6. A. Tessema, W. Mitchell, B. Koohbor, S. Ravindran, A. Kidane, M. Van Tooren. Effects of nanoparticles on the shear properties of polymer composites. Proceedings of the American Society for Composites 30th Technical Conference, 2015.
5. B. Koohbor, S. Mallon, A. Kidane. Through thickness fracture behavior of transversely graded Ti/TiB material. In: Conference Proceedings of the Society for Experimental Mechanics (Volume 5) J. Carroll, S. Daly (Editors), Springer 2015, pp: 51-56.
4. S. Mallon, B. Koohbor, A. Kidane. Fracture of Pre-Stressed Woven Glass Composite Exposed to Shock Loading. In: Conference Proceedings of the Society for Experimental Mechanics (Volume 1) B. Song, D. Casem, J. Kimberley (Editors), Springer 2015, pp: 213-219.
3. N. Zohhadi, B. Koohbor, F. Matta, A. Kidane. Characterization of fracture behavior of multi-walled carbon nanotube reinforced cement paste using digital image correlation. In: Conference Proceedings of the Society for Experimental Mechanics (Volume 5) J. Carroll, S. Daly (Editors), Springer 2015, pp: 73-79.
2. S. Ravindran, B. Koohbor, A. Kidane. On the meso-macro scale deformation of low carbon steel. Conference Proceedings of the Society for Experimental Mechanics (Volume 3) H. Jin, C. Sciammarella, S. Yoshida, L. Lamberti (Editors), Springer 2015, pp: 409-414.
1. A. Kidane, B. Koohbor, S. Mallon. Full-field study of fracture and failure of woven composites subjected to combined in-plane and out-of-plane loading. ASME 2014 International Mechanical Engineering Congress and Exposition, Montreal, Canada, November 2014.
41. K. Z. Uddin, I. A. Anni, G. Youssef, B. Koohbor. Tuning load bearing capacities of flexible honeycomb with Poisson’s ratio modulation. In: Proceedings of the American Society for Composites 38th Technical Conference, 2023.
40. I. A. Anni, M. S. Kaminskyj, K. Z. Uddin, J. F. Stanzione III, F. M. Haas, B. Koohbor. Repair of damaged fiber reinforced polymer composites with cold spray. International Thermal Spray Conference (ITSC) Proceedings, 2023.
39. N. K. Singh, N. B. Mennie, I. Nault, B. Koohbor, F. M. Haas, R. Jha. Analyzing cold spray of polymer-coated metal particles on polymeric and composite substrates. International Thermal Spray Conference (ITSC) Proceedings, 2023.
38. J. Muthilingam, N. K. Singh, R. Jha, B. Koohbor. Modeling cold spray deposition of thermoplastic polymers: effects of impact angle and temperature. In: Proceedings of the American Society for Composites 37th Technical Conference, 2022.
37. J. Mahon, N. Pagliocca, V. Harnack, B. Koohbor, R. Krchnavek, W. Xue. Cost-effective tensile testing apparatus for characterization of thin films at cryogenic temperatures. Conference Proceedings of the Society for Experimental Mechanics, 2022.
36. Y. Kokash, K. Z. Uddin, B. Koohbor, G. Youssef. Impact efficacy of elastomeric foams. Conference Proceedings of the Society for Experimental Mechanics, 2022.
35. K. Z. Uddin, Y. Kokash, I. Anni, G. Youssef, B. Koohbor. Impact response analysis of functionally graded foams with different inter-laminar adhesives. Conference Proceedings of the Society for Experimental Mechanics, 2022.
34. N. Pagliocca, N. Singh, C. Montgomery, B. Koohbor. Characterization of debonding in macro-glass fiber systems using full-field measurements. Conference Proceedings of the Society for Experimental Mechanics, 2022.
33. N. K. Singh, K. Z., Uddin, R. Jha, B. Koohbor. Analyzing micro-macro transitional length scale in unidirectional composites. In: Proceedings of the American Society for Composites 36th Technical Conference, 2021.
32. R. Livingston, B. Koohbor. In-situ characterization of fiber-matrix interface debonding via full-field measurements. In: Proceedings of the American Society for Composites 36th Technical Conference, 2021.
31. J. Mahon, J. Cook, V. Harnack, N. Pagliocca, B. Koohbor, R. Krchnavek, W. Xue. Addressing cryogenic dielectric material challenges in high-temperature superconducting cables with polyamide/silica nanocomposite thin films. ASME IMECE 2021.
30. K. Z. Uddin, G. Youssef, M. Trkov, B. Koohbor. Midsole performance optimization by designing density-graded foams. 2020 Biomedical Engineering Society (BMES) Virtual Annual Meeting, San Diego, CA, 2020.
29. M. Raeisinezhad, N. Pagliocca, B. Koohbor, M. Trkov. IntelliPad: Intelligent soft robotic pad for pressure injury prevention. 2020 IEEE/ASME AIM International Conference on Advanced Intelligent Mechatronics, Boston, MA, 2020.
28. B. Koohbor, C. B. Montgomery, N. R. Sottos. Measuring statistically equivalent RVE size in fiber composites. SEM 2020 Annual Conference on Experimental and Applied Mechanics (virtual meeting), 2020.
27. X. Zhang, B. Koohbor, L. Dean, N. Sottos, J. Moore, P. Geubelle. Modeling of process-induced residual deformations in frontal polymerization based manufacturing of thermosetting polymer components. IMECE 2019 International Mechanical Engineering Congress and Exposition, Salt Lake, UT, 2019.
26. B. Koohbor, P. J. Centellas, N. Parikh, D. G. Ivanoff, N. R. Sottos. Thermo-mechanical characterization of composites fabricated via frontal polymerization. Conference Proceedings of the Society for Experimental Mechanics, 2019.
25. B. Koohbor, C. B. Montgomery, S. R. White, N. R. Sottos. Meso-scale strain measurements in fiber reinforced composites. In: Proceedings of the American Society for Composites 33rd Technical Conference, 2018.
24. B. Koohbor, L. Sang, Ö. Ö. Çapraz, A. Gewirth, R. G. Nuzzo, S. R. White, N. R. Sottos. In-situ strain measurement in solid-state Li-ion batteries. Conference Proceedings of the Society for Experimental Mechanics, 2018.
23. M. Yourdkhani, B. Koohbor, D. Ivanoff, L. Dean, C. Lamuta, P. Centellas, I. Robertson, S. White, N. Sottos. Thermo-mechanical Properties of Thermoset Polymers and Composites Fabricated by Frontal Polymerization. Conference Proceedings of the Society for Experimental Mechanics, 2018.
22. C. B. Montgomery, A. Klepacki, B. Koohbor, P. Geubelle, N. Sottos. Characterization of Transverse Deformation and Failure Initiation at the Fiber/Matrix Interface using DIC in a SEM. Conference Proceedings of the Society for Experimental Mechanics, 2018.
21. B. Koohbor, S. Ravindran, A. Kidane. Impact response of density graded cellular polymers. In: Conference Proceedings of the Society for Experimental Mechanics (Volume 1), J. Kimberley, L. Lamberson, S. Mates (Editors) Springer 2018, pp: 17-23.
20. S. Ravindran, B. Koohbor, P. Malchow, A. Kidane. Compaction wave characteristics of polymer foams under dynamic loading. In: Conference Proceedings of the Society for Experimental Mechanics (Volume 1), J. Kimberley, L. Lamberson, S. Mates (Editors) Springer 2018, pp: 175-180.
19. S. Ravindran, B. Koohbor, A. Kidane. Experimental investigation of compaction wave propagation in cellular polymers. In: Conference Proceedings of the International Digital Image Correlation Society. M. Sutton, P. Reu (Editors), Springer 2017, pp: 113-115.
18. B. Koohbor, A. Kidane. Meso-scale constitutive response of woven composites subjected to large deformation. In: Proceedings of the American Society for Composites 31st Technical Conference, 2016.
17. B. Koohbor, A. Kidane, W. Lu. Characterizing the energy absorption of rigid polymeric foams under compressive direct impact loading. In: Proceedings of the American Society for Composites 31st Technical Conference, 2016.
16 B. Koohbor, A. Tessema, S. Ravindran, A. Kidane. Understanding the damage mechanisms in composites based on local deformation measurements. 12th International Conference on Durability of Composite Systems DURACOSYS 2016.
15. B. Koohbor, A. Kidane, W. Y. Lu, R. Patel. Specimen size effect on stress-strain response of foams under direct impact. In: Conference Proceedings of the Society for Experimental Mechanics (Volume 1) D. Casem, L. Lamberson, J. Kimberley (Editors), Springer 2017, pp: 253-261.
14. G. Valeri, B. Koohbor, A. Kidane, M. A. Sutton, H. Schreier. Investigating the tensile response of materials at high temperature using DIC. In: Conference Proceedings of the Society for Experimental Mechanics (Volume 3) S. Yoshida, L. Lamberti, C. Sciammarella (Editors), Springer 2017, pp: 77-82.
13. B. Koohbor, A. Kidane, M. A. Sutton, X. Zhao. Analysis of dynamic bending using DIC and Virtual Fields Method. In: Conference Proceedings of the Society for Experimental Mechanics (Volume 3) S. Yoshida, L. Lamberti, C. Sciammarella (Editors), Springer 2017, pp: 143-150.
12. B. Koohbor, A. Kidane, W. Y. Lu. Dynamic flow response of rigid polymer foam subjected to direct impact. In: Conference Proceedings of the Society for Experimental Mechanics (Volume 1) B. Song, L. Lamberson, D. Casem, J. Kimberley (Editors), Springer 2016, pp: 163-170.
11. B. Koohbor, G. Valeri, A. Kidane, M. A. Sutton. Thermo-mechanical properties of metals at elevated temperatures. In: Conference Proceedings of the Society for Experimental Mechanics (Volume 3) H. Jin, S. Yoshida, L. Lamberti, M. Lin (Editors), Springer 2016, pp: 117-123.
10. A. Tessema, R. W. Mitchell, B. Koohbor, S. Ravindran, A. Kidane, M. Van Tooren. On the mechanical response of polymer fiber composites reinforced with nanoparticles. In: Conference Proceedings of the Society for Experimental Mechanics (Volume 3) H. Jin, C. Sciammarella, S. Yoshida, L. Lamberti (Editors), Springer 2016, pp: 409-414.
9. A. Kidane, B. Koohbor, S. Ravindran. Experimental Study on Meso-Scale Deformation Response of Orthotropic Woven Composites Subjected to Tensile Loading. ASME 2016 International Mechanical Engineering Congress and Exposition, Phoenix, AZ, November 2016.
8. B. Koohbor, S. Ravindran, A. Kidane. Experimental study of the meso-scale heterogeneous deformation response of polymer composites. Proceedings of the American Society for Composites 30th Technical Conference, 2015.
7. B. Koohbor, A. Kidane, W. Y. Lu. Dynamic compressive response of polymeric foams subjected to direct impact loading. Proceedings of the American Society for Composites 30th Technical Conference, 2015.
6. A. Tessema, W. Mitchell, B. Koohbor, S. Ravindran, A. Kidane, M. Van Tooren. Effects of nanoparticles on the shear properties of polymer composites. Proceedings of the American Society for Composites 30th Technical Conference, 2015.
5. B. Koohbor, S. Mallon, A. Kidane. Through thickness fracture behavior of transversely graded Ti/TiB material. In: Conference Proceedings of the Society for Experimental Mechanics (Volume 5) J. Carroll, S. Daly (Editors), Springer 2015, pp: 51-56.
4. S. Mallon, B. Koohbor, A. Kidane. Fracture of Pre-Stressed Woven Glass Composite Exposed to Shock Loading. In: Conference Proceedings of the Society for Experimental Mechanics (Volume 1) B. Song, D. Casem, J. Kimberley (Editors), Springer 2015, pp: 213-219.
3. N. Zohhadi, B. Koohbor, F. Matta, A. Kidane. Characterization of fracture behavior of multi-walled carbon nanotube reinforced cement paste using digital image correlation. In: Conference Proceedings of the Society for Experimental Mechanics (Volume 5) J. Carroll, S. Daly (Editors), Springer 2015, pp: 73-79.
2. S. Ravindran, B. Koohbor, A. Kidane. On the meso-macro scale deformation of low carbon steel. Conference Proceedings of the Society for Experimental Mechanics (Volume 3) H. Jin, C. Sciammarella, S. Yoshida, L. Lamberti (Editors), Springer 2015, pp: 409-414.
1. A. Kidane, B. Koohbor, S. Mallon. Full-field study of fracture and failure of woven composites subjected to combined in-plane and out-of-plane loading. ASME 2014 International Mechanical Engineering Congress and Exposition, Montreal, Canada, November 2014.
Copyright © 2024 Mechanics of Advanced Materials Lab - All Rights Reserved.