75. Yujin Lee, Jaeman Song, Hiki Hong. Long-term performance analysis of a photovoltaic thermal-ground source heat pump (PVT-GSHP) system in heating dominated climates, Journal of Building Engineering. 2025
74. Hasan Caglayan , Hakan Caliskan , Hiki Hong. Advanced exergy‑based environmental analysis of a cogeneration system used for ceramic industry, Journal of Thermal Analysis and Calorimetry. 2025
73. ZJunaid Shahzad, Iftikhar Ahmad, Muhammad Ahsan., & Hiki Hong. Grey‐box modelling for estimation of optimum cut pointtemperature of crude distillation column, CAAI Transactions on Intelligence Technology. 2025
72. Ram Ji Tripathi , Devesh Kumar, Varun Kumar Singh., & Hiki Hong. Dynamic performance evaluation of a novel evaporative cooling system under variable environmental conditions, Applied Thermal Engineering. 2025
71. Zahid Ullah, Iftikhar Ahmad, Abdul Samad., & Hiki Hong. Artificial intelligence assisted prediction of optimum operatingconditions of shell and tube heat exchangers: A grey‐boxapproach, CAAI Transactions on Intelligence Technology. 2025
70. Yunis Khan, Pawan Kumar Singh, Gaurav Kumar., & Hiki Hong. Energy and exergy analyses of a solar driven trigeneration system using cascaded ejector-vapor compression refrigeration system for low temperature cooling, Energy. 2025
69. Iftikhar Ahmad, Aleena Zulfiqar, Maryam Shabbir., & Hiki Hong. Advanced sensors monitoring and control systems for environmental sustainability, Smart Cities and Sustainable Manufacturing. 2025
68. Iftikhar Ahmad, Maryam Shabbir, Aleena Zulfiqar., & Hiki Hong. Principles and frameworks of sustainable manufacturing, Smart Cities and Sustainable Manufacturing. 2025
67. Hakan Caliskan, Yavuz Ergun, Halil Ibrahim Karali, & Hiki Hong. Investigating the diesel engine emission performances with various novel emission filters, Energy. 2025
66. Jaeman Song, KyuJin Jeong, Gunwoo Baik, Hiki Hong., Mikyung Lim. Air-gap controlled smart window for spectral and angular selective modulation of solar radiation, Energy Conversion and Management. 2025
65. Junaid Shahzad, Iftikhar Ahmad, Hakan Caliskan., & Hiki Hong. Grey‐box modelling for estimation of optimum cut point temperature of crude distillation column, CAAI Transactions on Intelligence Technology. 2024
64. Zahid Ullah, Iftikhar Ahmad, Hakan Caliskan., & Hiki Hong. Artificial intelligence assisted prediction of optimum operating conditions of shell and tube heat exchangers: A grey‐box approach, CAAI Transactions on Intelligence Technology. 2024
63. Hasan Caglayan, Hakan Caliskan, Hiki Hong. Advanced exergy-based environmental analysis of a cogeneration system used for ceramic industry, Journal of Thermal Analysis and Calorimetry, 2024
62. Tripathi, R. J., Kumar, D., Caliskan, H., & Hong, H. Exergo-enviro-economic analyses of solar energy based novel air cooling system. Applied Thermal Engineering, 2024
61. Somi Jang, Seojun Min, Jaeman Song, and Hiki Hong. Analysis of Condensation in Energy Recovery Ventilator Depending on Type of Heat Exchanger - Simulation and Experiments. Journal of Building Engineering. 2024
60. Caglayan, H., Caliskan, H., Hong, H., Caliskan, N., Kale, U., & Kilikevičius, A. Advanced exergoeconomic analysis and mathematical modelling of the natural gas fired gas turbine unit used for industrial cogeneration system. Case Studies in Thermal Engineering, 2024
59. Saghir, H., Ahmad, I., Kano, M., Caliskan, H., & Hong, H. Prediction and optimisation of gasoline quality in petroleum refining: The use of machine learning model as a surrogate in optimisation framework. CAAI Transactions on Intelligence Technology. 2024
58. Sana, A., Ahmad, I., Saghir, H., Kano, M., Caliskan, H., & Hong, H. Plant wide modelling and thermodynamic optimization of a petroleum refinery for improvement potentials. Process Safety and Environmental Protection, 188(2024), 64-72.
57. Yadav, P. S., Ahmed, S. F. A., Gautam, R., Caliskan, H., Caliskan, N., & Hong, H. Nozzle effects on spray combustion and emissions in compression ignition engines using waste cooking oil biodiesel: A computational fluid dynamics analysis at varying injection pressures. IET Renewable Power Generation. 2024
56. Khan, Y., Raman, R., Said, Z., Caliskan, H., & Hong, H. Sustainable Power Generation Through Solar‐Driven Integration of Brayton and Transcritical CO2 Cycles: A Comprehensive 3E (Energy, Exergy, and Exergoenvironmental) Evaluation. Global Challenges, 2024, 8(2), 2300223.
55. Khan, Y., Caliskan, H., & Hong, H. A comparative study of combined cycles for concentrated solar power for efficient power generation using low Global Warming Potential (GWP) fluids to reduce environmental effects. IET Renewable Power Generation, 2023, 17(16), 3741-3754.
54. Khan, Y., Singh, D., Caliskan, H., & Hong, H. Exergoeconomic and Thermodynamic Analyses of Solar Power Tower Based Novel Combined Helium Brayton Cycle‐Transcritical CO2 Cycle for Carbon Free Power Generation. Global Challenges, 2023, 7(12), 2300191.
53. Dohyun Seung, Seojun Min, Hakan Caliskan, Hiki Hong. Investigation and Assessment of the Optimum Conditions of Solar Heat Source Hybrid Desiccant Cooling System Under Different Modes. Solar Energy, 265(2023), 112133
52. Yujin Ko, Kyu Jin Jeong, Hiki Hong. Suitability analysis of a temperature and humidity control device using a desiccant rotor. Journal of Mechanical Science and Technology, 2023, 37(2)
51. Piao,H.;Hakan,C.;Chung,J.D.;Kim,J,H.;Hong,H.Performance analysis of PVT systems applicable to apartment housing structures: Experiment and simulation. Journal of Mechanical Science and Technology, 2022, 36(10).
50. Emin,A.;Hakan,C.;Hong,H.;Piao,H.;Seung,D.Extended exergy analysis of a photovoltaic-thermal (PVT) module based desiccant air cooling system for buildings. Applied Energy, 2022, 323(119581).
49. Ko,Y.J.;Oh,H.G.;Hong,H.Energy consumption verification of SPD smart window, controllable according to solar radiation in south korea. Energies, 2020, 1-18.
48. Hakan Calisan.;Lee,D.;Hong,H.Assessments of High-Efficient Regenerative Evaporative Cooler Effects on Desiccant Air Cooling Systems. Journal of Energy Resources Technology-Transations or the Asme, 2020, 1-6.
47. Ngoc Vi Cao.;Xuan Quang Duong.;Lee,W.S.;Park,M.Y.;Chung,J.D.;Hong,H.Effect of heat exchanger materials on the performance of adsorption chiller. Jounal of Mechanical Science and Tecnology, 2020, 2217-2223.
46. Park,C.H;Ko,Y.J.;Kim,J.H.;Hong,H.Greenhuouse Gas Reduction Effect of Solar Energy Systems Applicable to High-Rise Apartment Housing Structures in South Korea. Energies, 2020, 1-13.
45. Calskan,H.;Lee,D.Y.;Hong,H.Enhanced thermodynamic assessments of the novel desiccant air cooling system for sustainable energy future. Journal of Cleaner Productions, 2019, 211, 213-221.
44. Jeong,D.;Lee,J.;Hong,H.;Choi,D.;Cho,J.W.;Kim,S.K.;Nam,Y.Absorption mechanism and performance characterization of CuO nanostructured absorbers. Elsevler science bv, 2017, 169, 270-279.
43. Yong,S.G.;Kim,J.H;Gim,Y.;Kim,J.;Cho,J.;Hong,H.;Baik,Y.J.;Koo,J. Impacts of building envelope design factors upon energy loads and their optimization in US standard climate zones using experimental design. Energy and buildings, 2017, 141, 1-15.
42. T. Morimoto, K. Togashi, H. Kumano, H. Hong, Thermophysical properties of phase change emulsions prepared by D-phase emulsification, Energy Conversion and Management, 122, 215-222, 2016.
41. Y. Park, S. Kim, I. H. Jang, Y. S. Nam, H. Hong, D. Choi, W. G. Lee, Role of the electric field in selective ion filtration in nanostructures, Analyst, 141, 129-1300, 2016.
40. J. H. Kim, U. J. Lee, LongJie Li, C. Kim, H. Hong, Improvement of collection efficiency and solar fraction in solar thermal storage system using a 3-way valve and a 2-stage flowrate control,, Journal of Mechanical Science and Technology, 30(7), 3347-3356, 2016.
39. C. Kim, E. Y. Moon, J. Hwang, H. Hong, Circuital characterisation of space-charge motion with a time-varying applied bias, Scientific reports, 5, 11783, 2015.
38. H. S. Son, C. Kim, D. Reindl, H. Hong, The effect of manifold in liquid storage tank applied to solar combisystem, Journal of Mechanical Science and Technology, 29, 1289-1295, 2015.
37. C. Pang, J. W. Lee, H. Hong, Y. T. Kang, Heat conduction mechanism in nanofluids, Journal of Mechanical Science and Technology, 28, 2925-2936, 2014.
36. J. Cho, S. Shin, J. Kim, H. Hong, Development of an energy evaluation methodology, Energy and Buildings, 80, 169-183, 2014.
35. D. H. Choi, J. Lee, H. Hong, Y. T. Kang, Thermal conductivity and heat transfer performance enhancement of phase change materials (PCM) containing carbon additives for heat storage application, international journal of refrigeration, 42, 112-120, 2014.
34. C. Kim, K. C. Noh, J. Hyun, S. G. Lee, J. Hwang, H. Hong, Microscopic energy conversion process in the ion drift region of electrohydrodynamic flow, Applied Physics Letters, 100, 243906[6 pages], 2012.
33. H. Hong, J. H. Kim, J. D. Chung, H. Kumano, D. Reindl, Freeze protection method using hot water for passive solar water heating system, Int. J. of Air-Conditioning and Refrigeration, 20(4), 1250021[7 pages], 2012.
32. J. Koo, H. So, S. W. Hong, H. Hong, Effects of wallboard design parameters on the thermal storage in buildings, Energy and buildings, 43, 1947-1951, 2011.
31. H. Y. Sul, H. Hong, Y. T. Kang, Thermal conductivity measurement of oil in water (O/W)nanoemulsion and oil in H2)/LoBr (OO/S) binary nanoemulsion of absorption application, International Journal of Refrigeration, 34, 1360-1365, 2011.
30. S. M Baek, J. H. Nam, H. Hong, C. J. Kim, Effect of brine flow rate on the performance of a spiral-jacketed thermal storage tank used for SDHW systems: A computational fluid dynamics study, Applied Thermal Engineering, 31, 2716-2725, 2011.
29. J. D. Chung, H. Hong , H. S. Yoo, Analysis on the impact of mean radiant temperature for the thermal comfort of underfloor air distribution systems, Energy and Buildings, 42, 2353-2359, 2010.
28. S. k. Kim, H. Hong, S. Kim, J. T. Kim, Method and Analysis of a Dynamic Simulation of ondol Heating, Indoor and Built Environment, 20(1), 112-119, 2010.
27. S. k. Kim, D. H Lee, H. Hong, An Energy Saving Technique Using Ondol heating Schedule Control of housing Units in Korea, Indoor and Built Environment, 19(1), 88-93, 2010.
26.H. Hong et al., Ventilation Design for a Chick Incubator Using Computational Fluid Dynamics, JARQ-JAPAN Agricultural Research Quarterly, vol. 43, pp. 227-237, 2009.
25. C. D. Kang, B. S. Kim, H. Hong, The Effect of Solution Pressure to the Release in a Supercooled Aqueous Solution, International Journal of Air-Conditioning and Refrigeration, 17(1), 25-31, 2009.
24. J. Y. Jeong, H. Hong, S. K Kim, Y. T. Kang, Impact of plate design on the performance of welded type plate heat exchangers for sorption cycles, International Journal of Refrigeration, 32(4), 705-711, 2009.
23. D. Reindl, S. K. Kim, Y. T. Kang, H. Hong, Experimental verification of a solar hot water heating system with a spiral-jacketed storage tank, Journal of Mechanical Science and Technology, Korean Society of Mechanical Engineers, 22(11), 2228-2235, 2009.
22. J. Kim, Y. T. Kang, S. N. Kim, J. H. Hwang, S. G. Lee, H. Hong, M. G. Kim, Performance investigation of thermoelectrics with an external spacer inserted in serious, International Journal of Thermal Sciences, 47 (4), 486-494, 2008.
21. Y. T. Kang, H. Hong, Y. S. Lee, Experimental correlation of falling film condensation on enhanced tubes with HFC134a;low-fin and Turbo-C tubes, International Journal of Refrigeration, 30 (5), 805-811, 2007.
20. C. D. Kang, H. Seung, H. Hong, Characteristic of the formation and adhesion of ice on a cooling surface by a stirring aqueous solution , Int. J. of air-conditioning and refrigeration, 14(3), 110-117, 2006.
19. J. H. Peck, J. J. Kim, C. H. Kang, H. Hong, A study of accurate latent heat measurement for a PCM with a low melting temperature using T-history method, Int. J. of Refrigeration, 29(7), 1225-1232, 2006.
18. Douglas T. Reindl, H. Hong, Evaluation of Liquid Pressure Amplifier Technology, Int. J. of Air-Conditioning and Refrigeration,13(3), 119-127, 2005.
17. H. Hong, J. H. Peck and C. Kang, Ice adhesion of an aqueous solution including a surfactant with stirring on cooling wall: Ethylene Glycol-A Silane coupling agent aqueous solution, Int. J. of Refrigeration, 27(8), 985-992, 2004.
16. H. Hong, C. Kang and J. H. Peck, Measurement methods of latent heat for PCM with low melting temperature in closed tube, Int. J. of Air-Conditioning and Refrigeration, 12(4), 206-213, 2004.
15. H. Hong, S. K. Kim and Y.-S. Kim, Accuracy improvement of T-history method for measuring heat of fusion of various materials, Int. J. of Refrigeration, 27(4) pp. 360-366, 2004.
14. Y.-T. Kang, H. Hong and K. S. Park, Performance analysis of advanced hybrid GAX cycles: HGAX, Int. J. of Refrigeration, 27(4) pp. 442-448, 2004.
13. H. Hong, C. H. Park, J. H. Choi and J. H. Peck, Improvement of the T-history method to measure heat of fusion for phase change materials, Int. J. of Air-Conditioning and Refrigeration, 11(1), pp.32~39, 2003.
12. H. Hong and M. G. Kim, Melting of Ice on the heating plate with split fins, Int. J. of Air-Conditioning and Refrigeration, 9(2), pp. 1-7, 2001.
11. Kyung-Chun Jang, Hiki Hong and Charn-Jung Kim, A numerical treatment of phase interface by CIP and enthalpy method, Heat Transfer-Asian Research, 30(6), 463-472, 2001.
10. H. Yoo, H. Hong and C. J. Kim, Analytical solutions for the unsteady direct-contact melting on a flat surface(1st report: isothermal heating), Transactions. of JSME, 65(640), 4084-4091, 1999.
09. J. H. Nam, H. Hong and C. J. Kim, Freeze coating of a cylindrical object with a binary alloy, Heat Transfer-Asian Research, 28(4), 239-254, 1999.
08. H. Yoo, H. Hong and C. J. Kim, Effects of transverse convection and solid-liquid density difference on the steady close-contact melting, Int. J. of Heat Fluid Flow, 19(4), 368-373, 1998.
07. H. Yoo, H. Hong and E. Pak, Analysis on transient thermal behaviors during the charging process in stratified heat storage tanks (part 2: Effects of characteristic parameters), Transactions. of JSME, 63(615), 3683-3690, 1997.
06. H. Yoo, H. Hong and E. Pak, Analysis on transient thermal behaviors during the charging process in stratified heat storage tanks (part 1: Analytical solutions), Transactions. of JSME, 62(596), 1570-1575, 1996.
05. H. Hong, A. Saito, and K. Yamashita, Performance of latent heat thermal energy storage system with split fins, Transactions. of JSME, 60(572), 310-317, 1994.
04. H. Hong and A. Saito, Numerical method for direct contact melting in transient process, Int. J. Heat Mass Transfer, 36(8), 2093-2103, 1993.
03. H. Hong, A. Saito, and O. Hirokane, Heat transfer enhancement in the direct contact melting process, Int. J. Heat Mass Transfer, 35(2), 295-305, 1992.
02. H. Hong, A. Saito and O. Hirokane, Analytical study on heat transfer enhancement in direct contact melting, Transactions of the JAR, 8(2), 141-149, 1991.
01. H. Hong, A. Saito and O. Hirokane, Heat transfer in direct contact melting process, Transactions of JSME, 57(541), 3141-3148, 1991.
72. 김덕근, 조아진, 송재만, 홍희기 2025, 기상 예보 데이터와 관측 데이터를 고려한 LSTM 기반 태양열 시스템 예측 모델, 설비공학논문집, Vol. 37, No. 8, pp.384~394
71. 이유진, 송재만, 홍희기, 2025, 온실 적용을 위한 PVT와 GSHP 결합 난방 시스템의 제어 방법 비교 및 성능 평가, 설비공학논문집, Vol. 37, No. 5, pp.217~227
70. 민서준, 유원종, 홍희기, 2024, 증발식 응축기를 활용한 태양열원 데시컨트 냉방시스템의 실증실험 및 에너지 소비량 분석, 대한기계학회, Vol 48, No 1, pp.41~48.
69. 최태규, 홍희기, 2022, 벽체일체형 강제순환 태양열오수기의 열성능 평가(제2보: 시뮬레이션), 설비공학논문집, Vol. 34, No. 9, pp.410-419
68. 장소미, 고유진, 박보경, 홍희기, 2021, 열회수형 환기장치 적용 시 다중이용시설의 환기횟수에 따른 냉·난방부하와 감염률, 설비공학논문집, Vo1. 33, No. 3, pp.199-207.
67. 한혜린, 오효근, 홍희기, 민준기, 2021, 학교 미세먼지 관리기술 개발을 위한 건물 DB 구축 및 코드체계 표준화 연구, 설비공학논문집, Vo1. 33, No. 2, pp.043-054.
66. 고유진, 홍희기, 민준기, 2020, 열회수형 환기장치의 습도교환효율에 따른 동하계 결로발생률과 에너지회수율, 설비공학논문집, Vo1. 32, No. 10, pp.457-464.
65. 고유진, 홍희기, 민준기, 2020, 창면적비와 SHGC 범위에 따른 SPD를 적용한 반응형 스마트창호의 에너지 성능 평가, 설비공학논문집, Vo1. 32, No. 9, pp.441-447.
64. 장소미, 고유진, 민준기, 홍희기, 2020, 다중이용업소의 환기방법에 따른 냉난방에너지 소비량, 설비공학논문집, Vo1. 32, No. 8, pp.405-411.
63. 오효근, 박인규, 이지하, 민준기, 홍희기, 2019, AI 기반 신재생에너지 해수담수화 융합시스템을 위한 예측진단시스템 구축 방안, 설비공학논문집, Vo1. 31, No. 12, pp.539-547.
62. 민준기, 고유진, 홍희기, 2019, 테스트베드 구축을 위한 스마트스킨의 에너지 성능 평가, 설비공학논문집, Vo1. 31, No. 10, pp.483-495.
61. 김종현, 한유정, 김철, 홍희기, 2018, 태양열 계간축열조에 변유량 및 변위치 제어를 적용한 효과, 설비공학논문집, Vo1. 30, No. 12, pp.609-619.
60. 민준기,홍희기, 2018, 냉방부하 저감을 위한 스마트 스킨의 에너지 성능 평가에 관한 연구, 설비공학논문집,Vo1. 30, No. 11, pp.546-557.
59. 홍희기, 최준영, 임신영, 2017. 신재생에너지 기기로서 히트펌프의 신재생에너지 생산량, 설비공학 논문집,Vo1. 29, No. 10, pp.551-557.
58. 이은주, 구준모, 홍희기, 2016. 공동주택에서 비난방세대가 미치는 열적 영향, 설비공학논문집, Vo1. 28, No. 1, pp.042-047.
57. 정다솔, 이정현, 홍희기, 남영석, 산화구리기반 나노표면 태양열 흡수판 성능평가 및 분석, 대한기계학회, 2016(4), 184-185, 2016.
56. 김종현, 이용걸, 이욱재, 홍희기, 열교환코일 내장형 태양열 축열조의 성능향상(제2보 시뮬레이션), 설비공학논문집, 28(09), 361-366, 2016.
55. 이은주 구준모, 홍희기, 공동주택에서 비난방세대가 미치는 열적 영향, 설비공학논문집, 28(01), 42-47, 2016.
54. 이욱재, 홍희기, 열교환코일 내장형 태양열 축열조의 성능향상(제1보 실증실험), 설비공학논문집, 27(4), 213-219, 2015.
53. 이성욱, 홍희기, 조성환, 지역난방의 일반제어 및 열량제어 에너지 시뮬레이션, 설비공학논문집, 27(01), 50-56, 2014.
52. 이은주, 이두영, 홍희기, 김영균, 지역난방 아파트에 대한 난방에너지 실측 및 시뮬레이션, 설비공학논문집, 26(12), 572-578, 2014.
51. 이원철, 홍희기, 태양열 시스템 고장진단을 위한 유체센서와 알고리즘, 설비공학논문집, 377-380, 2014.
50. 손효석, 홍희기, 태양열 콤비시스템의 축열조에 적용되는 분배기의 효과, 설비공학논문집, 26(7), 322-328, 2014.
49. 이성훈, 손효석, 홍희기, 나선유로에 의한 태양열 축열조 성층화 촉진(제2보 시뮬레이션), 설비공학논문집, 26(1), 008-014, 2014.
48. 조진균, 신승호, 김종헌, 황동곤, 홍희기, 사무소 건물의 HVAC&R 시스템 에너지 분석방법 및 예측 프로그램 개발, 설비공학논문집, 25(7), 363-370, 2013.
47. 권재욱, 홍희기, 나선유로에 의한 태양열 축열조 성층화 촉진(제1보 실증실험), 설비공학논문집, 24(4), 336-342, 2012.
46. 김종현, 홍희기, 정재동 자연순환형 태양열온수기 동파방지기술, 설비공학논문집, 23(5), 327-333, 2011.
45. 권재욱, 김종현, 홍희기, 혹한기 지역에서의 자연순환형 태양열 시스템 동파방지, 대한설비공학회 한국태양에너지학회 논문집, 31(5), 41-46, 2011.
44. 김시환, 홍희기, 온돌 난방분배기의 개도조정, 설비공학논문집, 22(6), 460-467, 2010.
43. 김시환, 홍희기, 온돌 난방에 대한 동적 시뮬레이션 및 분석, 설비공학논문집, 22(6), 375-382, 2010.
42. 정재동, 홍희기, 유호선, 바닥공조시스템에서 복사온도가 열적 쾌적성에 미치는 영향 , 설비공학논문집, 20(11), 711-717, 2008.
41. 남진현, 김민철, 김찬중, 홍희기, 태양열 시스템에 적용된 나선재킷형 축열조의 CFD 해석, 설비공학논문집, 20(10), 645-653, 2008.
40. 김성수, 홍희기, 한국형 태양열 온수급탕 시스템의 대책과 제안, 설비공학논문집, 20(9), 631-636, 2008.
39. 최봉수, 홍희기, 이대영, 대향류 핀삽입형 재생증발식 냉방기 연구, 설비공학논문집, 20(7), 447-454, 2008.
38. 김병선, 백종현, 홍희기, 강채동, 정지상태 수용액에서 가압과 냉각속도가 과냉각해소에 미치는 영향, 설비공학논문집, 19(12), 850-856, 2007.
37. 이동규, 백종현, 홍희기, 강채동, 판형 열교환기를 이용한 과냉각수용액에서 유동과냉도 및냉각속도가 연속제빙에 미치는 영향, 설비공학논문집, 19(9), 647-653, 2007.
36. 정동열, 백종현, 강채동, 홍희기, 화합물 작용기와 화학구조에 따른 수용액의 빙부착 억제 효과, 설비공학논문집, 19(8), 607-614, 2007.
35. 정해원, 백종현, 김용찬, 강채동, 홍희기, 배관내 흐르는 아이스슬러리의 실시간 얼음분율 측정, 설비공학논문집, 19(8), 599-606, 2007.
34. 최영돈, 강용태, 김내현, 김만회, 박경근, 박병윤, 박진철, 홍희기, 공기조화, 냉동 분야의 최근 연구 동향, 설비공학논문집, 19(1), 94-131, 2007.
33. 김동혁, 홍희기, 유호선, 김욱중, 강제환기가 적용된 시험공간에서 냉난방부하의 시뮬레이션 및 실증실험, 설비공학논문집, 18(12), 947-954, 2006.
32. 이동규, 김병선, 백종현, 홍희기, 강채동, 가압 판형 열교환기에 의한 수용액의 아이스슬러리 생성, 설비공학논문집, 18(7), 596-602. 2006.
31. 최봉수, 홍희기, 이대영, 재생증발식 수냉각기의 냉각성능 해석, 설비공학논문집, 18(5), 393-401, 2006.
30. 백종현, 정동열, 강채동, 홍희기, 굴절률을 이용한 수용액의 빙충전율 측정, 설비공학논문집, 17(11), 1088-1094, 2005.
29. 박유원, 유호선, 홍희기, 한국형 아파트의 난방에너지 분석 3: 실내설정조건의 영향, 설비공학논문집, 17(8), 722-728, 2005.
28. 김진홍, 최봉수, 홍희기, 김용식, 태양열 시스템에 적용된 나선재킷형 축열조의 실증실험, 설비공학논문집, 17(4), 341-346, 2005.
27. 이윤석, 백종현, 강채동, 홍희기, T-history법에 의한 저온 PCM 잠열측정의 정밀도 향상, 설비공학논문집, 17(3), 223-231, 2005.
26. 이봉진, 강채동, 이상렬, 홍희기, 6kW급 태양열 온수급탕 시스템의 실증실험 및 분석(제4보 경제성비교 및 경쟁력강화), 설비공학논문집, 17(3), 232-242, 2005.
25. 승 현, 홍희기, 강채동, 냉각면 성상이 빙부착에 미치는 영향, 설비공학논문집, 17(2), 183-190, 2005.
24. 최봉수, 이봉진, 강채동, 홍희기, 6kW급 태양열 온수급탕 시스템의 실증실험 및 분석(제3보 최적설계 및 경제성평가), 설비공학논문집, 17(1), 16-24, 2005.
23. 승 현, 백종현, 홍희기, 강채동, 교반동력에 의한 기능성 물질 함유 수용액의 빙부착 평가, 설비공학논문집, 16(8), 720-727, 2004.
22. 최봉수, 김진홍, 강용태, 홍희기, 6kW급 태양열 온수급탕 시스템의 실증실험 및 분석(제2보 모델링 및 시뮬레이션), 설비공학논문집, 16(6), 556-565, 2004.
21. 이봉진, 정동열, 이 선, 홍희기, 한국형 아파트의 난방에너지 분석 2: 난방방식에 따른 차이, 설비공학논문집 16(5), 459-466, 2004.
20. 오민규, 이봉진, 홍희기, 강용태, LCC 분석에 의한 상온에너지수송용 흡수식냉동기(STA)의 경제성 평가, 설비공학논문집, 16(6), 506-513, 2004.
19. 김진홍, 김성수, 최봉수, 홍희기, 6kW급 태양열 온수급탕 시스템의 실증실험 및 분석(제 1보 실증실험), 설비공학논문집, 16(2), 128-134, 2004.
18. 유호선, 현석균, 박유원, 김용식, 홍희기, 한국형 아파트의 난방에너지 분석 1: 위치의 영향, 설비공학논문집, 16(1), 101-110, 2004.
17. 김성수, 윤희정, 홍희기, 강용태, 냉동기용 자동냉매 충전장치 개발, 에너지 공학회 논문집, 12(4), 253-258, 2003.
16. 박창현, 백종현, 강채동, 홍희기, T-history법에 의한 잠열량 측정 정확도의 향상, 설비공학논문집, 15(8), 652-660, 2003.
15. 유호선, 현석균, 김용식, 홍희기, 시험공간에 대한 냉방부하 실증실험 및 계산, 설비공학논문집, 15(8), 641-651, 2003.
14. 류경용, 박창현, 백종현, 홍희기, 밀폐튜브 내 저온 PCM의 잠열측정법, 설비공학논문집, 15(7), 604-610, 2003.
13. 강채동, 손권, 백종현, 홍희기, 수용액의 교반/냉각을 동반한 슬러리 얼음의 빙부착, 설비공학논문집, 14(12), 1071-1077, 2002.
12. 강채동, 강용태, 홍희기, 다성분계 수용액의 교반/냉각에 의한 빙부착, 설비공학논문집, 14(12), 1063-1070, 2002.
11. 유호선, 현석균, 홍희기, 한국형 아파트의 냉난방 에너지에 미치는 제 인자의 영향, 설비공학논문집, 14(11), 972-980, 2002.
10. 현석균, 홍희기, 유호선, 시험공간에 대한 난방부하 실증실험 및 계산, 설비공학 논문집 14(2), 153-160, 2002.
09. 박창현, 최주환, 홍희기, PCM의 잠열 측정을 위한 T-history법에 대한 고찰, 설비공학 논문집 13(12), 1223-1229, 2001.
08. 강용태, 조현철, 홍희기, 하이브리드 GAX 사이클 해석 : 성능향상 및 저온획득 응용, 설비공학논문집, 13(10), 923-929, 2001.
07. 홍희기, 김무근, 분할된 핀붙이 전열면 상에서의 얼음의 용융, 공기조화냉동공학 논문집, 12(1), 67-74, 2000.
06. 이대영, 정성훈, 강병하, 홍희기, 스크류 압축식 냉동기의 성능향상에 관한 실험적 연구, 공기조화냉동공학 논문집, 11(1), 48-60, 1999.
05. 홍희기 외 9인, 동계 인공 환경 실험에서의 온열쾌적감과 생리적 변화, 스트레스 연구, 6(1), 1-8, 1998.
04. 박종일, 김경훈, 홍희기, 민병일, 김창주, 하계 인공환경실험에서의 온열쾌적특성, 공기조화냉동공학 논문집, 10(3), 368-377, 1998.
03. 홍희기, 유호선, 김찬중, 종방향대류 및 고액밀도차가 고려된 접촉융해에 대한 해석해, 대한기계학회논문집(B), 21(9), 1165-1173, 1997.
02. 김영인, 홍희기, 배철호, 김영일, 윤호식, 빙축열조 내부의 열적유동에 대한 특성해석, 한국공기조화냉동공학회지, 17(4), 369-376, 1988.
01. 홍희기, 김효경, 태양열 시스템에 적용되는 축열조에 관한 연구, 한국공기조화냉동공학회지, 15(1), 87-96, 1986.