See these pictures from the glove80community on Discord.

A C-clamp (or D-clamp) is a tool that can be used to securely attach things to a desk. It’s often used for cameras and other equipment because it’s stable and easy to use. The clamp has a screw that tightens to hold it firmly on the edge of your desk. It works with different desk thicknesses and has threaded holes (1/4 and 3/8) that fit many types of mounts.

Why is it better? A C-clamp holds things more securely than other clamps and is less likely to move or damage your desk. It spreads the pressure across a larger area, so it won’t leave marks or dents. Other clamps, like crab or super clamps, might not grip as tightly, especially on thinner desks.

In short, a C-clamp is a solid, versatile option for most desk setups.

Find this on:
Amazon  |  Google  |  Aliexpress 

A magic arm is a flexible tool that can be used to mount and adjust items like your Glove80 to a desk or chair. It can bend and move to any angle you need, and the joints lock in place to keep everything steady.

For example, a 10-inch magic arm gives you enough reach to position your keyboard comfortably, without taking up much space or needing a big stand.

Tip: Use spring washers to prevent joints from rotating inward and becoming loose. They’re designed to keep fasteners secure by resisting rotation. 

Find this on:
Amazon  |  Google  |  Aliexpress 

Screw in your desk
Mason —My new setup. First time mounting a keyboard. I used thin plywood under the Glove80 sides and then used MagSafe connectors to connect to the arms. It works great. Lots of control over angles and positioning. In addition I can trade between the Glove80 and my ZSA Moonlander easily. Thanks to those on this board for giving me all the ideas I used to make this. 

Source on Discord

Vertical Pole
theblenderer — Look, I had an idea! Maybe this has been thought of before 🙂 I really like the feel of it, currently using a mic stand wedged under my desk but thinking of getting extendable shower curtain rods for this (for both home and work). Clamps are Smallrig

Source on Discord

A chair mount connects your Glove80 keyboard to your chair, holding it at the right angle while you sit. This setup helps you type more comfortably, providing better support and reducing strain on your hands and wrists.

To secure your Glove80 to pipes or armrests, use a Crab Clamp, also known as a Super Clamp.

A crab clamp, or super clamp, has a small jaw that grips things very tightly. Because the jaw is small, it focuses all the pressure on a small spot on your desk. This can leave marks, scratches, or even cause dents because the pressure isn’t spread out.

A C-clamp, on the other hand, has a wider jaw, which helps spread the pressure more evenly across the desk. This reduces the risk of damage and helps keep your desk safe.

Find super clamp with Google

22"/57cm Adjustable Magic Arm with Super Clamp Camera Mount, Articulating Arm Friction Magic Arm Camera Mount Clamp with 1/4" Thread for LED Light Microphone Video Rig Tripod
Source:  MoErgo Discord

Find this with Google

Source:  MoErgo Discord 

More about extending the arms can be found below in the accessoires section

Check Wolfwood's page here

Kenny:  I’ve tried various small rig arms mounted on chair arms and none of them have been stable enough for long term use.  I now have this:
Source: MoErgo Discord

mamlong34 - white mount arm white Sanko MARMGUS129AW
Source: MoErgo Discord

PRO SIGNAL 1290B  -  Find this with Google
or sold  under different brand name
Pulse Full Motion Double Arm TV Bracket Pole Mount   -  Find this with Google
Also sold as  Sanko MARMGUS129AW (looks the same, see exampl C)
UK  -  Pulse LCDPMT-TA

See another example of these mounted on a chair from Wolfwood

As illustrated in the picture above, the horizontal surface can be expanded with a VESA plate to accommodate a trackball.

HumanCentric VESA mounting adapter plate for VESA cartridges of 200 x 100 mm | Conversion kit for VESA cartridges of 75 x 75 and 100 x 100 mm to VESA cartridges of 200 x 100 mm

Find this with Google

The camera screw is slightly thicker, so make the hole a bit wider to screw it into the quick-release base.
Don’t use normal screws—see the accessories section below to learn why and how camera screws are different!

See source on Discord from goldstein

Warning:  A cheaper and lighter alternative but also less solid and rigid. 
The hinge moves smoothly and must be mounted horizontally (see pic), which means you won’t have vertical adjustment.   (VIVO Steel Universal Full Motion Pole).
Some tried these and switched to something else - see this from Honestbook

Find this with Google    

littleEndian:  Discord Source   Herman Miller chair

Nadril:  Discord Source   Herman Miller chair

⭐ Cool adapter for the Herman Miller chair

https://www.printables.com/model/1168055-herman-miller-aeron-2015-armrest-articulating-arm

kantlivelong:  Discord Source 

https://vivo-us.com/products/mount-ms02d

abfshaal1:  Discord Source

"i tried them with the cusions and then removed the cusions, the palms rests from glove 80 was the better choice to keep." - see source

dragonabacus:  Discord Source 

Accs: Camera screws 

The thread used for attaching a camera to a tripod is typically a 1/4 inch diameter with a finer thread pitch compared to normal screws. This specific size and design ensure a secure and stable connection, tailored for photographic equipment, whereas normal screws vary widely in size and pitch for general purposes.

MINIFOCUS Camera Thread Adapter, 1/4'' Female to 1/4'' Female Threaded Screw with ARRI, Tripod Barrel Nut Standard Mounting Double Thread Converter for Camera Monitor Tripod Magic Arm, Pack of 2

Amazon

Use spring washers to prevent joints from rotating inward and becoming loose. They’re designed to keep fasteners secure by resisting rotation.

Search  Google

eggsy: Glove80 Tripod Mounting Plate (Non-Quick-Release). And the rest from amazon: Ugreen magsafe ahesive ring(goes on the outer side of the of the plate), neewer st-ccd1 desk c clamp, and 9" st08 magic arm. Took about 20mins to assemble after arriving . Easy to attach and detach and can more easily vary the angle of the mounting plate easily . And when loosening the magic arm screw you can move around with ...many degrees of freedom as it has joints at the ends plus angle is adjustable between both parts of the arm
Source: MoErgo Discord

Moosy note: There's a higher risk of it accidentally falling off since it's less solid than the camera mount. It can rotate while mounted—what happens if you bump into it when leaving your desk?

MoErgo offers a plate adapter that makes the mounting points compatible with standard photographic tripod fittings. This enables users to create custom-mounted solutions such as vertical or chair-mounted keyboards.
MoErgo drawing leg-stud-locations

Original MoErgo
MoErgo leg-stud-locations

Andrews stencil.
Source on Discord

Get this drawing in pdf    dxf

Source on Discord  Errorcode

Also checkout the ABS version on this page

Source on Discord   Salvas

salvazz

On printables.com from asdf  plate.3mf

read-description on pritables for details 

RobJonHol: I created a remix of the 3D mount plate that adds a 1/4 nut hole.

Source on Discord  -   material  is PLA

https://makerworld.com/en/models/791469

Another option for 3D printing or laser cutting your own mounting plate. This time with wrist rest or mouse pad (optional) and non-sharp corners. Generated with python via Build123d.

Source on Discord

https://www.printables.com/model/1093210-glove80-mounting-plate-with-14-tripod-screw-hole

Salvas acrylic

Source on Discord

Theo did the bare minimum from the original drawing. I couldn't find a basic step file of this layout, so here's one.

Source on Discord     step file

Start with carton  
Discord Source

Andrew
Discord Source

Source on Discord

Is this the DXF file  here  ?

Source on Discord

Source on Discord

My new setup. First time mounting a keyboard. I used thin plywood under the Glove80 sides and then used MagSafe connectors to connect to the arms. It works great. Lots of control over angles and positioning. In addition I can trade between the Glove80 and my ZSA Moonlander easily. Thanks to those on this board for giving me all the ideas I used to make this   see shopping list

JoshK

joshk9016:  This is based on Errorcodes design

Source on Discord

@mopets created this 3d printable mount

https://www.printables.com/model/1401533-glove80-keyboard-mount

Source on Discord